Over-the-Air Download (OAD)

• Introduction
  • OAD Topology Overview
• Boot Image Manager (BIM)
  • Overview & Software Architecture
  • Boot procedure
    • Device trim
  • Locating and Preparing a user application
    • BIM for Off-Chip OAD
• OAD Image Header
  • OAD Image Header Overview
  • OAD Core Image Header
    • OAD Image Identification Value
    • CRC
    • BIM Version
    • Image Header Version
    • Wireless Technology
    • Image Information
    • Image Validation
    • Image Length
    • Program Entry Address
    • Software version
    • Image End Address
    • Header Length
  • OAD Image Header segments
    • Segment Header
      • Segment Type
      • Wireless Technology
      • Reserved
      • Payload Length
    • Boundary Information Segment
      • Stack Entry Address
      • Stack Boundary Address (ICALL_STACK0_ADDR)
      • Lower RAM Boundary (RAM_START_ADDR)
      • Upper RAM Boundary (RAM_END_ADDR)
    • Contiguous Image Information Segment
      • Image Start Address
• OAD External Flash Image Header
  • Additional Fields in External Flash Image Header
• Flash Layout for Off-Chip OAD
  • Constraints and Requirements for Off-chip OAD
  • Internal Flash Memory Layout
  • External Flash Memory Layout
• OAD Image Tool
  • Running the tool
  • Running the Tool from Source
  • Required Arguments/Getting help
• OAD Process
• Setting up the BLE OAD Environment
  • Prerequisites
  • OAD Target Setup
  • OAD Distributor Setup
    • Flashing the host_test Image
    • Connecting BTool to host_test
• Performing a BLE OAD
  • Modifying the Image Version
  • OAD using BTool
• Create a Downloadable Thread Image
  • Changes to linker script
  • Remove or change project files
  • Add the post-build steps to the project
• Creating a Production Image
  • Change to Release BIM
  • Loading a Production Image
• Reverting to a Factory Image