TI-OpenThread User’s Guide

Table of contents

• Introduction to the SimpleLink CC13xx/CC26xx SDK
  • Prerequisites
  • SDK - Download and Installation
  • IDE - Download and Installation
• TI-OpenThread Introduction
• SimpleLink Wireless MCU CC13xx and CC26xx Overview
  • Hardware Architecture
  • Sensor Controller
  • Further information
• TI-RTOS7 (RTOS Kernel) Overview
  • Threading Modules
  • Kernel Configuration
  • Creating vs. Constructing
  • Thread Synchronization
  • Queues
  • Tasks
  • Clocks
  • Power Management
  • TI-RTOS to TI-RTOS7 Migration
• Developing Thread Applications
  • TI-OpenThread Overview
  • Application Development
  • Example Applications
  • NCP Interface
  • Thread Product Certification
• Thread Networking Protocol
  • Thread Devices
  • Addressing
  • Network Setup
  • Network Maintenance
  • Thread Applications
• Custom Hardware
  • Designing a Custom Board
  • Creating a Custom Board File
  • Change Device Configuration
  • Configuring Device Parameters for Custom Hardware
  • Configuring the RF Front-End for Custom Hardware
  • Set-up SysConfig When Using a Custom Board
  • Initial Board Bring Up
• Packet Sniffer
  • Ubiqua Protocol Analyzer
  • Wireshark
• Linux Border Router Quick Start
  • Platform Notes
  • Setting Up the BeagleBone Black
  • Building wpantund and libcoap
  • Running libcoap Example
• Over-the-Air Download (OAD)
  • Introduction
  • OAD Storage & Security
  • Boot Image Manager (BIM)
  • BIM for Off-Chip OAD
  • OAD Image Header
  • OAD External Flash Image Header
  • Flash Layout for Off-Chip OAD
  • OAD Image Tool
  • TI-OpenThread Native OAD
  • Non-native OAD
  • Create a TI-OpenThread OAD Image
• System Configuration (SysConfig)
  • Get started with SysConfig
  • Configure The Board Files with SysConfig
  • Reserve Peripheral(s)
  • Hardware View
  • Migrating Board Variant
  • TI-OpenThread SysConfig
  • Disable SysConfig
• Debugging
  • Debug Serial Back Channel Connection
  • External Resources
  • Debug Interfaces
  • Breakpoints
  • Watching Variables and Registers
  • Memory Watchpoints
  • TI-RTOS Object Viewer
  • Using the Memory Browser
  • Connect the debugger to a running target
  • Optimizations
  • Deciphering CPU Exceptions
  • OpenThread Logging & The Debug Uart
• Memory overview
  • Memory Map
  • Flash Vector Table
  • Customer Configuration (CCFG) Table
  • Using the AUX RAM as RAM
  • Using the Cache as RAM
• Migration Guide
  • Porting Guides
  • Migration Guides
• EnergyTrace User Guide
  • EnergyTrace stand-alone Instructions
  • EnergyTrace++ Instructions
  • Using EnergyTrace with an External Target
  • Troubleshooting
• References
• Terms and Definitions
  • General Terms and Acronyms
  • Thread Terms and Acronyms
  • TI-RTOS7 Terms and Acronyms
  • Over-the-Air Download (OAD) Terms and Acronyms
  • Sensor Controller Terms and Acronyms