Here is a list of all struct and union fields with links to the structures/unions they belong to:

- b -

• Bandgap_Active_Mode : Ref_Control_0_register_type
• BAT_Det_Active : BQ27410_Control_Status_type
• Battery_Insertion_Detected : BQ27410_Flags_type
• Battery_Insertion_Detection : BQ27410_Operation_Configuration_type
• Baud_Rate : UART_Device_Parameter_type
• Block_Data : BQ27410_Read_Parameters_type
• Block_Data_Checksum : BQ27410_Read_Parameters_type
• Block_Data_Control : BQ27410_Read_Parameters_type
• Block_Filled_Flag : ADC_10_Data_Control_0_register_type
• Block_Transfer_Mode : ADC_10_Data_Control_0_register_type
• Break_Condition_Detected_Flag : USCI_UART_Status_register_type
• Break_Interrupt_Enable : USCI_UART_Control_1_register_type
• Break_Synch_Delimiter_Length : USCI_UART_Auto_Baud_Rate_Control_register_type
• Break_Timeout_Error_Flag : USCI_UART_Auto_Baud_Rate_Control_register_type
• broadcast_transaction_ID : DHCP_Response_type
• Buffer_Active : PGA280_Reg4_Error_Register_type
• Buffer_Timeout : PGA280_Reg3_Buf_Timeout_Register_type
• BufferSize : UART_Rx_Slot_type
• Bus_ADC_Resolution_Samples : INA220_Configuration_register_type
• Bus_Voltage : INA220_Bus_Voltage_register_type
• Bus_Voltage_Conversion_Time : INA226_Configuration_register_type
• Bus_Voltage_Over_Voltage : INA226_Alert_Configuration_register_type
• Bus_Voltage_Range : INA220_Configuration_register_type
• Bus_Voltage_Under_Voltage : INA226_Alert_Configuration_register_type
• Bypass_Respiration_DC_Block_Capacitor : ADS1x9x_PACE_Detect_Settings_Register_type
• Byte_Count_Of_Next_Block_Read : CDCE913_Generic_Configuration_Block_Read_Count_Register_type
• Byte_Swap_Enable : CC112X_Packet_Config_1_register_type