6. How to Guides

• 6.1. Host
  • 6.1.1. How to Build a Ubuntu Linux host under VMware
  • 6.1.2. Connect to an EVM via Telnet
  • 6.1.3. How to Setup a Samba Server
  • 6.1.4. Boot Sequence
  • 6.1.5. Moving Files to the Target System
  • 6.1.6. How to Flash from U-boot Shell
  • 6.1.7. Customizing the SDK Splash Screen
  • 6.1.8. AM335x ICEv2 flash erase
  • 6.1.9. Ubuntu 14.04 Set Up to Network Boot an AM335x/AM437x Based Platform
    • 6.1.9.1. Step By Step
    • 6.1.9.2. How to Get Images
    • 6.1.9.3. Troubleshooting
  • 6.1.10. How to Develop with 3D Graphics
  • 6.1.11. How to Develop accelerated Multimedia using GStreamer on AM57xx
  • 6.1.12. Preventing BeagleBone board reset on JTAG Connect
  • 6.1.13. Processor SDK IPC Quick Start Guide
  • 6.1.14. Create DSP and IPU firmware using PDK drivers and IPC to load from ARM Linux
  • 6.1.15. Program the eMMC on Beaglebone Black
    • 6.1.15.1. Overview
    • 6.1.15.2. What is Needed
    • 6.1.15.3. Preparing the Flasher Image
    • 6.1.15.4. Program the Flash
    • 6.1.15.5. Troubleshooting
• 6.2. Target
  • 6.2.1. How to Recalibrate the Touchscreen
  • 6.2.2. SDK File System Optimization/Customization
  • 6.2.3. How to add a JVM
  • 6.2.4. How to use a Mouse instead of the Touchscreen with Matrix
  • 6.2.5. Update U-Boot Environment Variables stored in SPI Flash from Linux
  • 6.2.6. How to change dtb files
  • 6.2.7. How to Boot Beagle Bone Black with Processor SDK Linux
  • 6.2.8. Flashing eMMC on BeagleBone Black via SD Card
    • 6.2.8.1. Overview
    • 6.2.8.2. What is Needed
    • 6.2.8.3. Preparing the SD Card
    • 6.2.8.4. Booting EVM and Running Partition Script
• 6.3. Hardware EVM Setup
  • 6.3.1. AM335x ICE EVM Hardware Setup
    • 6.3.1.1. Description
    • 6.3.1.2. EVM Layout and Key Components
    • 6.3.1.3. Quick Start Guide
    • 6.3.1.4. Boot Configuration
    • 6.3.1.5. Connecting the AM3359 ICE to Code Composer Studio
    • 6.3.1.6. Running Board Diagnostics
  • 6.3.2. AMIC110 ICE EVM Hardware Setup
    • 6.3.2.1. Description
    • 6.3.2.2. EVM Layout and Key Components
    • 6.3.2.3. Quick Start Guide
    • 6.3.2.4. Boot Configuration
    • 6.3.2.5. Connecting the AMIC110 ICE to Code Composer Studio
    • 6.3.2.6. Running Board Diagnostics
• 6.4. Board Port
  • 6.4.1. U-Boot Board Port
    • 6.4.1.1. Overview
    • 6.4.1.2. Integrating support for a new board into the U-Boot tree
      • 6.4.1.2.1. Creating an initial baseline by cloning and flattening TI EVM support
      • 6.4.1.2.2. Customizing the newly-established baseline to support actual target platform
      • 6.4.1.2.3. Building out full support for target platform
    • 6.4.1.3. U-Boot Bringup Debugging Tips
  • 6.4.2. Linux Board Port
    • 6.4.2.1. Overview
    • 6.4.2.2. Creating an initial baseline “Hello World” Device Tree Source file
    • 6.4.2.3. Iteratively Building the PinMux for Custom Board
    • 6.4.2.4. Suggested Tips