wlan.h

/*
 * wlan.h - CC31xx/CC32xx Host Driver Implementation
 *
 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ 
 * 
 * 
 *  Redistribution and use in source and binary forms, with or without 
 *  modification, are permitted provided that the following conditions 
 *  are met:
 *
 *    Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer.
 *
 *    Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the 
 *    documentation and/or other materials provided with the   
 *    distribution.
 *
 *    Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
*/



/*****************************************************************************/
/* Include files                                                             */
/*****************************************************************************/
#include <ti/drivers/net/wifi/simplelink.h>

#ifndef __WLAN_H__
#define __WLAN_H__


#ifdef    __cplusplus
extern "C" {
#endif


/*****************************************************************************/
/* Macro declarations                                                        */
/*****************************************************************************/
#define SL_WLAN_BSSID_LENGTH                    (6)
#define SL_WLAN_SSID_MAX_LENGTH                 (32)

#define SL_WLAN_NUM_OF_RATE_INDEXES             (20)
#define SL_WLAN_SIZE_OF_RSSI_HISTOGRAM          (6)
#define SL_WLAN_SMART_CONFIG_KEY_LENGTH         (16)
#define SL_WLAN_SMART_CONFIG_DEFAULT_CIPHER     (1)
#define SL_WLAN_SMART_CONFIG_DEFAULT_GROUP      (0)

#define SL_WLAN_MAX_PROFILES                    (7)
#define SL_WLAN_DEL_ALL_PROFILES                (255)

typedef enum
{
    SL_WLAN_P2P_WPS_METHOD_DEFAULT,
    SL_WLAN_P2P_WPS_METHOD_PIN_USER,
    SL_WLAN_P2P_WPS_METHOD_PIN_MACHINE,
    SL_WLAN_P2P_WPS_METHOD_REKEY,
    SL_WLAN_P2P_WPS_METHOD_PBC,
    SL_WLAN_P2P_WPS_METHOD_REGISTRAR
} SlWlanP2PWpsMethod_e;

/* WLAN user events */
typedef enum
{
    SL_WLAN_EVENT_CONNECT = 1,
    SL_WLAN_EVENT_DISCONNECT,
    SL_WLAN_EVENT_STA_ADDED,
    SL_WLAN_EVENT_STA_REMOVED,

    SL_WLAN_EVENT_P2P_CONNECT,
    SL_WLAN_EVENT_P2P_DISCONNECT,
    SL_WLAN_EVENT_P2P_CLIENT_ADDED,
    SL_WLAN_EVENT_P2P_CLIENT_REMOVED,
    SL_WLAN_EVENT_P2P_DEVFOUND,
    SL_WLAN_EVENT_P2P_REQUEST,
    SL_WLAN_EVENT_P2P_CONNECTFAIL,

    SL_WLAN_EVENT_RXFILTER,
    SL_WLAN_EVENT_PROVISIONING_STATUS,
    SL_WLAN_EVENT_PROVISIONING_PROFILE_ADDED,
    SL_WLAN_EVENT_LINK_QUALITY_TRIGGER,
    SL_WLAN_EVENT_MAX

} SlWlanEventId_e;


/* WLAN Disconnect Reason Codes */
#define  SL_WLAN_DISCONNECT_UNSPECIFIED                                         (1)
#define  SL_WLAN_DISCONNECT_AUTH_NO_LONGER_VALID                                (2)
#define  SL_WLAN_DISCONNECT_DEAUTH_SENDING_STA_LEAVING                          (3)
#define  SL_WLAN_DISCONNECT_INACTIVITY                                          (4)
#define  SL_WLAN_DISCONNECT_TOO_MANY_STA                                        (5)
#define  SL_WLAN_DISCONNECT_FRAME_FROM_NONAUTH_STA                              (6)
#define  SL_WLAN_DISCONNECT_FRAME_FROM_NONASSOC_STA                             (7)
#define  SL_WLAN_DISCONNECT_DISS_SENDING_STA_LEAVING                            (8)
#define  SL_WLAN_DISCONNECT_STA_NOT_AUTH                                        (9)
#define  SL_WLAN_DISCONNECT_POWER_CAPABILITY_INVALID                            (10)
#define  SL_WLAN_DISCONNECT_SUPPORTED_CHANNELS_INVALID                          (11)
#define  SL_WLAN_DISCONNECT_INVALID_IE                                          (13)
#define  SL_WLAN_DISCONNECT_MIC_FAILURE                                         (14)
#define  SL_WLAN_DISCONNECT_FOURWAY_HANDSHAKE_TIMEOUT                           (15)
#define  SL_WLAN_DISCONNECT_GROUPKEY_HANDSHAKE_TIMEOUT                          (16)
#define  SL_WLAN_DISCONNECT_REASSOC_INVALID_IE                                  (17)
#define  SL_WLAN_DISCONNECT_INVALID_GROUP_CIPHER                                (18)
#define  SL_WLAN_DISCONNECT_INVALID_PAIRWISE_CIPHER                             (19)
#define  SL_WLAN_DISCONNECT_INVALID_AKMP                                        (20)
#define  SL_WLAN_DISCONNECT_UNSUPPORTED_RSN_VERSION                             (21)
#define  SL_WLAN_DISCONNECT_INVALID_RSN_CAPABILITIES                            (22)
#define  SL_WLAN_DISCONNECT_IEEE_802_1X_AUTHENTICATION_FAILED                   (23)
#define  SL_WLAN_DISCONNECT_CIPHER_SUITE_REJECTED                               (24)
#define  SL_WLAN_DISCONNECT_DISASSOC_QOS                                        (32)
#define  SL_WLAN_DISCONNECT_DISASSOC_QOS_BANDWIDTH                              (33)
#define  SL_WLAN_DISCONNECT_DISASSOC_EXCESSIVE_ACK_PENDING                      (34)
#define  SL_WLAN_DISCONNECT_DISASSOC_TXOP_LIMIT                                 (35)
#define  SL_WLAN_DISCONNECT_STA_LEAVING                                         (36)
#define  SL_WLAN_DISCONNECT_STA_DECLINED                                        (37)
#define  SL_WLAN_DISCONNECT_STA_UNKNOWN_BA                                      (38)
#define  SL_WLAN_DISCONNECT_STA_TIMEOUT                                         (39)
#define  SL_WLAN_DISCONNECT_STA_UNSUPPORTED_CIPHER_SUITE                        (40)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_NONE                                (100)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_LOW_TX_RATE                         (104)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_LOW_SNR                             (105)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_LOW_QUALITY                         (106)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_TSPEC_REJECTED                      (107)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_MAX_TX_RETRIES                      (108)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_BSS_LOSS                            (109)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_BSS_LOSS_DUE_TO_MAX_TX_RETRY        (110)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_SWITCH_CHANNEL                      (111)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_AP_DISCONNECT                       (112)
#define  SL_WLAN_DISCONNECT_ROAMING_TRIGGER_SECURITY_ATTACK                     (113)
#define  SL_WLAN_DISCONNECT_USER_INITIATED                                      (200)
#define  SL_WLAN_DISCONNECT_AUTH_TIMEOUT                                        (202)
#define  SL_WLAN_DISCONNECT_ASSOC_TIMEOUT                                       (203)
#define  SL_WLAN_DISCONNECT_SECURITY_FAILURE                                    (204)
#define  SL_WLAN_DISCONNECT_WHILE_CONNNECTING                                   (208)
#define  SL_WLAN_DISCONNECT_MISSING_CERT                                        (209)
#define  SL_WLAN_DISCONNECT_CERTIFICATE_EXPIRED                                 (210)



#define  SL_WLAN_STATUS_DISCONNECTED    (0)
#define  SL_WLAN_STATUS_SCANING         (1)
#define  SL_WLAN_STATUS_CONNECTING      (2)
#define  SL_WLAN_STATUS_CONNECTED       (3)

#define SL_WLAN_PROVISIONING_GENERAL_ERROR                                           (0)
#define SL_WLAN_PROVISIONING_CONFIRMATION_STATUS_FAIL_NETWORK_NOT_FOUND              (1)
#define SL_WLAN_PROVISIONING_CONFIRMATION_STATUS_FAIL_CONNECTION_FAILED              (2)
#define SL_WLAN_PROVISIONING_CONFIRMATION_STATUS_CONNECTION_SUCCESS_IP_NOT_ACQUIRED  (3)
#define SL_WLAN_PROVISIONING_CONFIRMATION_STATUS_SUCCESS_FEEDBACK_FAILED             (4)
#define SL_WLAN_PROVISIONING_CONFIRMATION_STATUS_SUCCESS                             (5)
#define SL_WLAN_PROVISIONING_ERROR_ABORT                                             (6)
#define SL_WLAN_PROVISIONING_ERROR_ABORT_INVALID_PARAM                               (7)
#define SL_WLAN_PROVISIONING_ERROR_ABORT_HTTP_SERVER_DISABLED                        (8)
#define SL_WLAN_PROVISIONING_ERROR_ABORT_PROFILE_LIST_FULL                           (9)
#define SL_WLAN_PROVISIONING_ERROR_ABORT_PROVISIONING_ALREADY_STARTED                (10)
#define SL_WLAN_PROVISIONING_AUTO_STARTED                                            (11)
#define SL_WLAN_PROVISIONING_STOPPED                                                 (12)
#define SL_WLAN_PROVISIONING_SMART_CONFIG_SYNCED                                     (13)
#define SL_WLAN_PROVISIONING_SMART_CONFIG_SYNC_TIMEOUT                               (14)
#define SL_WLAN_PROVISIONING_CONFIRMATION_WLAN_CONNECT                               (15)
#define SL_WLAN_PROVISIONING_CONFIRMATION_IP_ACQUIRED                                (16)
#define SL_WLAN_PROVISIONING_EXTERNAL_CONFIGURATION_READY                            (17)

#define SL_WLAN_SEC_TYPE_OPEN                                                        (0)
#define SL_WLAN_SEC_TYPE_WEP                                                         (1)
#define SL_WLAN_SEC_TYPE_WPA                                                         (2) /* deprecated */
#define SL_WLAN_SEC_TYPE_WPA_WPA2                                                    (2)
#define SL_WLAN_SEC_TYPE_WPS_PBC                                                     (3)
#define SL_WLAN_SEC_TYPE_WPS_PIN                                                     (4)
#define SL_WLAN_SEC_TYPE_WPA_ENT                                                     (5)
#define SL_WLAN_SEC_TYPE_P2P_PBC                                                     (6)
#define SL_WLAN_SEC_TYPE_P2P_PIN_KEYPAD                                              (7)
#define SL_WLAN_SEC_TYPE_P2P_PIN_DISPLAY                                             (8)
#define SL_WLAN_SEC_TYPE_P2P_PIN_AUTO                                                (9) /* NOT Supported yet */
#define SL_WLAN_SEC_TYPE_WEP_SHARED                                                  (10)
#define SL_WLAN_SEC_TYPE_WPA_PMK                                                     (15)

#define SL_TLS                                                                       (0x1)
#define SL_MSCHAP                                                                    (0x0)
#define SL_PSK                                                                       (0x2)
#define SL_TTLS                                                                      (0x10)
#define SL_PEAP0                                                                     (0x20)
#define SL_PEAP1                                                                     (0x40)
#define SL_FAST                                                                      (0x80)

#define SL_WLAN_FAST_AUTH_PROVISIONING                                               (0x02)
#define SL_WLAN_FAST_UNAUTH_PROVISIONING                                             (0x01)
#define SL_WLAN_FAST_NO_PROVISIONING                                                 (0x00)
         
#define SL_WLAN_PROVISIONING_CMD_START_MODE_AP                                       (0)
#define SL_WLAN_PROVISIONING_CMD_START_MODE_SC                                       (1)
#define SL_WLAN_PROVISIONING_CMD_START_MODE_APSC                                     (2)
#define SL_WLAN_PROVISIONING_CMD_START_MODE_APSC_EXTERNAL_CONFIGURATION              (3)
#define SL_WLAN_PROVISIONING_CMD_STOP                                                (4)
#define SL_WLAN_PROVISIONING_CMD_ABORT_EXTERNAL_CONFIRMATION                         (5)

/* Provisioning API Flags */
#define SL_WLAN_PROVISIONING_CMD_FLAG_EXTERNAL_CONFIRMATION                          (0x00000001)

/* to be used only in provisioning stop command */
#define SL_WLAN_PROVISIONING_REMAIN_IN_CURRENT_ROLE                                  (0xFF)


#define SL_WLAN_EAPMETHOD_PHASE2_SHIFT                                               (8)
#define SL_WLAN_EAPMETHOD_PAIRWISE_CIPHER_SHIFT                                      (19)
#define SL_WLAN_EAPMETHOD_GROUP_CIPHER_SHIFT                                         (27)

#define SL_WLAN_WPA_CIPHER_CCMP                                                      (0x1)
#define SL_WLAN_WPA_CIPHER_TKIP                                                      (0x2)
#define SL_WLAN_CC31XX_DEFAULT_CIPHER                                                (SL_WLAN_WPA_CIPHER_CCMP | SL_WLAN_WPA_CIPHER_TKIP)

#define SL_WLAN_EAPMETHOD(phase1,phase2,pairwise_cipher,group_cipher)      \
                                                    ((phase1) | \
                                                    ((phase2) << SL_WLAN_EAPMETHOD_PHASE2_SHIFT ) |\
                                                    ((_u32)(pairwise_cipher) << SL_WLAN_EAPMETHOD_PAIRWISE_CIPHER_SHIFT ) |\
                                                    ((_u32)(group_cipher) << SL_WLAN_EAPMETHOD_GROUP_CIPHER_SHIFT ))

/*                                                                         phase1    phase2                                     pairwise_cipher               group_cipher         */
#define SL_WLAN_ENT_EAP_METHOD_TLS                       SL_WLAN_EAPMETHOD(SL_TLS,   0,                                 SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_TTLS_TLS                  SL_WLAN_EAPMETHOD(SL_TTLS,  SL_TLS,                            SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_TTLS_MSCHAPv2             SL_WLAN_EAPMETHOD(SL_TTLS,  SL_MSCHAP,                         SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_TTLS_PSK                  SL_WLAN_EAPMETHOD(SL_TTLS,  SL_PSK,                            SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_PEAP0_TLS                 SL_WLAN_EAPMETHOD(SL_PEAP0, SL_TLS,                            SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_PEAP0_MSCHAPv2            SL_WLAN_EAPMETHOD(SL_PEAP0, SL_MSCHAP,                         SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_PEAP0_PSK                 SL_WLAN_EAPMETHOD(SL_PEAP0, SL_PSK,                            SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_PEAP1_TLS                 SL_WLAN_EAPMETHOD(SL_PEAP1, SL_TLS,                            SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_PEAP1_PSK                 SL_WLAN_EAPMETHOD(SL_PEAP1, SL_PSK,                            SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_FAST_AUTH_PROVISIONING    SL_WLAN_EAPMETHOD(SL_FAST,  SL_WLAN_FAST_AUTH_PROVISIONING,    SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_FAST_UNAUTH_PROVISIONING  SL_WLAN_EAPMETHOD(SL_FAST,  SL_WLAN_FAST_UNAUTH_PROVISIONING,  SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)
#define SL_WLAN_ENT_EAP_METHOD_FAST_NO_PROVISIONING      SL_WLAN_EAPMETHOD(SL_FAST,  SL_WLAN_FAST_NO_PROVISIONING,      SL_WLAN_CC31XX_DEFAULT_CIPHER , SL_WLAN_CC31XX_DEFAULT_CIPHER)

#define SL_WLAN_LONG_PREAMBLE                         (0)
#define SL_WLAN_SHORT_PREAMBLE                        (1)

/* 2.4G - 1 bit band = 0 , 5 remaining bits for channel (1..14) */
#define SL_WLAN_RAW_RF_TX_PARAMS_CHANNEL_SHIFT        (0)
#define SL_WLAN_RAW_RF_TX_PARAMS_BAND_SHIFT           (5)
#define SL_WLAN_RAW_RF_TX_PARAMS_RATE_SHIFT           (6)
#define SL_WLAN_RAW_RF_TX_PARAMS_POWER_SHIFT          (11)
#define SL_WLAN_RAW_RF_TX_PARAMS_PREAMBLE_SHIFT       (15)

/* 5.0G – 1 bit band = 1, split the 5G 8 bit channel into 2 places LO, HI */
#define SL_WLAN_RAW_RF_TX_PARAMS_5G_RATE_SHIFT        (9)
#define SL_WLAN_RAW_RF_TX_PARAMS_5G_CHANNEL_SHIFT_HI  (12) 
#define SL_WLAN_RAW_RF_TX_PARAMS_5G_POWER_SHIFT       (14)
#define SL_WLAN_RAW_RF_TX_PARAMS_5G_PREAMBLE_SHIFT    (15)

/* 5.0 G - 8bit channel */
#define CHANNEL_DECODE_MASK_LO                        (0x1f)     /* 5 LSB of 5G channel */
#define CHANNEL_DECODE_SHIFT_HI                       (5)        /* 5 LSB of 5G channel */
#define CHANNEL_DECODE_MASK_HI                        (0xe0)     /* 3 MSB of 5G channel */
#define POWER_DECODE_MASK_LO                          (0x01)     /* 1 bit of 5G power */
#define MAX_2_4G_CHANNEL_NUMBER                       (14)
#define BAND_2_4G                                     (0)
#define BAND_5_0G                                     (1)
        
#define SL_WLAN_RAW_RF_TX_PARAMS(chan,rate,power,preamble) \
                                                ((unsigned char)(chan) <= MAX_2_4G_CHANNEL_NUMBER) ? ( \
                                                    (chan     << SL_WLAN_RAW_RF_TX_PARAMS_CHANNEL_SHIFT) | \
                                                    (BAND_2_4G<< SL_WLAN_RAW_RF_TX_PARAMS_BAND_SHIFT)    | \
                                                    (rate << SL_WLAN_RAW_RF_TX_PARAMS_RATE_SHIFT) | \
                                                    (power << SL_WLAN_RAW_RF_TX_PARAMS_POWER_SHIFT) | \
                                                    (preamble << SL_WLAN_RAW_RF_TX_PARAMS_PREAMBLE_SHIFT) \
                                                ) : ( \
                                                    ( (chan & CHANNEL_DECODE_MASK_LO) << SL_WLAN_RAW_RF_TX_PARAMS_CHANNEL_SHIFT) | \
                                                    (BAND_5_0G<< SL_WLAN_RAW_RF_TX_PARAMS_BAND_SHIFT)    | \
                                                    (rate     << SL_WLAN_RAW_RF_TX_PARAMS_RATE_SHIFT)    | \
                                                    (((chan & CHANNEL_DECODE_MASK_HI) >> CHANNEL_DECODE_SHIFT_HI)  << SL_WLAN_RAW_RF_TX_PARAMS_5G_CHANNEL_SHIFT_HI) | \
                                                    ((power & POWER_DECODE_MASK_LO) << SL_WLAN_RAW_RF_TX_PARAMS_POWER_SHIFT)   | \
                                                    (preamble << SL_WLAN_RAW_RF_TX_PARAMS_PREAMBLE_SHIFT) \
                                                )

/* Open 5G transceiver socket parameters */
#define TRANSCEIVER_5G_LOW_POWER_LOW_RATE    0x01  /* bit 0*/
#define SL_WLAN_RAW_RF_SOCKET_CHANNEL(channel, flags)   (channel&0xFF | (flags&0xFF)<<8)

/* wlan config application IDs */
#define SL_WLAN_CFG_AP_ID                             (0)
#define SL_WLAN_CFG_GENERAL_PARAM_ID                  (1)
#define SL_WLAN_CFG_P2P_PARAM_ID                      (2)
#define SL_WLAN_CFG_AP_ACCESS_LIST_ID                 (3)
#define SL_WLAN_RX_FILTERS_ID                         (4)
#define SL_WLAN_CONNECTION_INFO                       (5)

/* wlan AP Config set/get options */
#define SL_WLAN_AP_OPT_SSID                           (0)
#define SL_WLAN_AP_OPT_CHANNEL                        (3)
#define SL_WLAN_AP_OPT_HIDDEN_SSID                    (4)
#define SL_WLAN_AP_OPT_SECURITY_TYPE                  (6)
#define SL_WLAN_AP_OPT_PASSWORD                       (7)
#define SL_WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE        (9)
#define SL_WLAN_GENERAL_PARAM_OPT_STA_TX_POWER        (10)
#define SL_WLAN_GENERAL_PARAM_OPT_AP_TX_POWER         (11)



#define SL_WLAN_P2P_OPT_DEV_NAME                      (12)
#define SL_WLAN_P2P_OPT_DEV_TYPE                      (13)
#define SL_WLAN_P2P_OPT_CHANNEL_N_REGS                (14)
#define SL_WLAN_GENERAL_PARAM_OPT_INFO_ELEMENT        (16)
#define SL_WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS         (18)  /* change the scan channels and RSSI threshold using this configuration option */
#define SL_WLAN_AP_OPT_MAX_STATIONS                   (19)
#define SL_WLAN_AP_ACCESS_LIST_ADD_MAC                (20)
#define SL_WLAN_AP_ACCESS_LIST_DEL_MAC                (21)
#define SL_WLAN_AP_ACCESS_LIST_DEL_IDX                (22)
#define SL_WLAN_AP_ACCESS_LIST_NUM_ENTRIES            (24)
#define SL_WLAN_AP_ACCESS_LIST_MODE                   (25)
#define SL_WLAN_AP_OPT_MAX_STA_AGING                  (26)

#define SL_WLAN_RX_FILTER_STATE                           (27)
#define SL_WLAN_RX_FILTER_REMOVE                          (28)
#define SL_WLAN_RX_FILTER_STORE                           (29)
#define SL_WLAN_RX_FILTER_UPDATE_ARGS                     (30)
#define SL_WLAN_RX_FILTER_SYS_STATE                       (31)
#define SL_WLAN_GENERAL_PARAM_DISABLE_ENT_SERVER_AUTH     (32)
#define SL_WLAN_GENERAL_PARAM_OPT_SUSPEND_PROFILES        (33)
#define SL_WLAN_GENERAL_PARAM_OPT_ENABLE_5G               (34)
#define SL_WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS_5G          (35)
#define SL_WLAN_GENERAL_PARAM_OPT_USER_COUNTRY_ATTRIB     (36)
#define SL_WLAN_GENERAL_PARAM_OPT_COUNTRY_ATTRIB          (37)
#define SL_WLAN_GENERAL_PARAM_REGISTER_LINK_QUALITY_EVENT (38)
#define SL_WLAN_GENERAL_PARAM_COEX_CONFIG                 (39)
#define SL_WLAN_GENERAL_PARAM_ANT_SELECTION_CONFIG        (40)
#define SL_WLAN_GENERAL_PARAM_ANT_SELECTION_SET           (41)
#define SL_WLAN_GENERAL_PARAM_ANT_SELECTION_GET           (42)
#define SL_WLAN_GENERAL_PARAM_EXT_CONNECTION_INFO         (44)


/* SmartConfig CIPHER options */
#define SL_WLAN_SMART_CONFIG_CIPHER_SFLASH            (0)      /* password is not delivered by the application. The Simple Manager should
                                                                  check if the keys are stored in the Flash. */
#define SL_WLAN_SMART_CONFIG_CIPHER_AES               (1)      /* AES (other types are not supported) */
#define SL_WLAN_SMART_CONFIG_CIPHER_NONE              (0xFF)   /* do not check in the flash */


#define SL_WLAN_POLICY_CONNECTION                     (0x10)
#define SL_WLAN_POLICY_SCAN                           (0x20)
#define SL_WLAN_POLICY_PM                             (0x30)
#define SL_WLAN_POLICY_P2P                            (0x40)

#define SL_WLAN_VAL_2_MASK(position,value)            ((1 & (value))<<(position))
#define SL_WLAN_MASK_2_VAL(position,mask)             (((1 << position) & (mask)) >> (position))

#define SL_WLAN_CONNECTION_POLICY(Auto,Fast,anyP2P,autoProvisioning)         (SL_WLAN_VAL_2_MASK(0,Auto) | SL_WLAN_VAL_2_MASK(1,Fast) | SL_WLAN_VAL_2_MASK(2,0) | SL_WLAN_VAL_2_MASK(3,anyP2P) | SL_WLAN_VAL_2_MASK(4,0) | SL_WLAN_VAL_2_MASK(5,autoProvisioning))
#define SL_WLAN_SCAN_POLICY_EN(policy)                (SL_WLAN_MASK_2_VAL(0,policy))
#define SL_WLAN_SCAN_POLICY(Enable,Enable_Hidden)     (SL_WLAN_VAL_2_MASK(0,Enable) | SL_WLAN_VAL_2_MASK(1,Enable_Hidden))


#define SL_WLAN_ENABLE_SCAN                           (1)
#define SL_WLAN_DISABLE_SCAN                          (0)
#define SL_WLAN_ALLOW_HIDDEN_SSID_RESULTS             (1)
#define SL_WLAN_BLOCK_HIDDEN_SSID_RESULTS             (0)
          
#define SL_WLAN_NORMAL_POLICY                         (0)
#define SL_WLAN_LOW_LATENCY_POLICY                    (1)
#define SL_WLAN_LOW_POWER_POLICY                      (2)
#define SL_WLAN_ALWAYS_ON_POLICY                      (3)
#define SL_WLAN_LONG_SLEEP_INTERVAL_POLICY            (4)
#define SL_WLAN_IOT_LOW_POWER_POLICY                  (6)
  
#define SL_WLAN_P2P_ROLE_NEGOTIATE                    (3)
#define SL_WLAN_P2P_ROLE_GROUP_OWNER                  (15)
#define SL_WLAN_P2P_ROLE_CLIENT                       (0)
         
#define SL_WLAN_P2P_NEG_INITIATOR_ACTIVE              (0)
#define SL_WLAN_P2P_NEG_INITIATOR_PASSIVE             (1)
#define SL_WLAN_P2P_NEG_INITIATOR_RAND_BACKOFF        (2)
        
#define SL_WLAN_POLICY_VAL_2_OPTIONS(position,mask,policy)    ((mask & policy) << position )

#define SL_WLAN_P2P_POLICY(p2pNegType,p2pNegInitiator)   (SL_WLAN_POLICY_VAL_2_OPTIONS(0,0xF,(p2pNegType > SL_WLAN_P2P_ROLE_GROUP_OWNER ? SL_WLAN_P2P_ROLE_GROUP_OWNER : p2pNegType)) | \
                                                     SL_WLAN_POLICY_VAL_2_OPTIONS(4,0x1,(p2pNegType > SL_WLAN_P2P_ROLE_GROUP_OWNER ? 1:0)) | \
                                                     SL_WLAN_POLICY_VAL_2_OPTIONS(5,0x3, p2pNegInitiator))


/* Info elements */
#define SL_WLAN_INFO_ELEMENT_DEFAULT_ID               (0) /* 221 will be used */

/* info element size is up to 252 bytes (+ 3 bytes of OUI). */
#define SL_WLAN_INFO_ELEMENT_MAX_SIZE                 (252)

/* For AP - the total length of all info elements is 300 bytes (for example - 4 info elements of 75 bytes each) */
#define SL_WLAN_INFO_ELEMENT_MAX_TOTAL_LENGTH_AP      (300)

/* For P2P - the total length of all info elements is 160 bytes (for example - 4 info elements of 40 bytes each) */
#define SL_WLAN_INFO_ELEMENT_MAX_TOTAL_LENGTH_P2P_GO  (160)

#define SL_WLAN_INFO_ELEMENT_AP_ROLE                  (0)
#define SL_WLAN_INFO_ELEMENT_P2P_GO_ROLE              (1)

/* we support up to 4 info elements per Role. */
#define SL_WLAN_MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED   (4)

#define SL_WLAN_INFO_ELEMENT_DEFAULT_OUI_0            (0x08)
#define SL_WLAN_INFO_ELEMENT_DEFAULT_OUI_1            (0x00)
#define SL_WLAN_INFO_ELEMENT_DEFAULT_OUI_2            (0x28)

#define SL_WLAN_INFO_ELEMENT_DEFAULT_OUI              (0x000000)  /* 08, 00, 28 will be used */

#define SL_WLAN_AP_ACCESS_LIST_MODE_DISABLED          0
#define SL_WLAN_AP_ACCESS_LIST_MODE_DENY_LIST         1
#define SL_WLAN_MAX_ACCESS_LIST_STATIONS              8

#define SL_WLAN_IOTLP_BITMAP_FORCE_DMS               0X40
#define SL_WLAN_IOTLP_BITMAP_FORCE_PROXY_ARP         0X80

/* Scan results security information */
#define SL_WLAN_SCAN_RESULT_GROUP_CIPHER(SecurityInfo)                      (SecurityInfo & 0xF)   /* Possible values: NONE,SL_WLAN_CIPHER_BITMAP_TKIP,SL_WLAN_CIPHER_BITMAP_CCMP */
#define SL_WLAN_SCAN_RESULT_UNICAST_CIPHER_BITMAP(SecurityInfo)             ((SecurityInfo & 0xF0) >> 4 ) /* Possible values: NONE,SL_WLAN_CIPHER_BITMAP_WEP40,SL_WLAN_CIPHER_BITMAP_WEP104,SL_WLAN_CIPHER_BITMAP_TKIP,SL_WLAN_CIPHER_BITMAP_CCMP*/
#define SL_WLAN_SCAN_RESULT_HIDDEN_SSID(SecurityInfo)                       (SecurityInfo & 0x2000 ) >> 13 /* Possible values: TRUE/FALSE */    
#define SL_WLAN_SCAN_RESULT_KEY_MGMT_SUITES_BITMAP(SecurityInfo)            (SecurityInfo & 0x1800 ) >> 11  /* Possible values: SL_WLAN_KEY_MGMT_SUITE_802_1_X, SL_WLAN_KEY_MGMT_SUITE_PSK */
#define SL_WLAN_SCAN_RESULT_SEC_TYPE_BITMAP(SecurityInfo)                   (SecurityInfo & 0x700   ) >> 8  /* Possible values: SL_WLAN_SECURITY_TYPE_BITMAP_OPEN, SL_WLAN_SECURITY_TYPE_BITMAP_WEP, SL_WLAN_SECURITY_TYPE_BITMAP_WPA, SL_WLAN_SECURITY_TYPE_BITMAP_WPA2, 0x6 (mix mode) SL_WLAN_SECURITY_TYPE_BITMAP_WPA | SL_WLAN_SECURITY_TYPE_BITMAP_WPA2 */

#define SL_WLAN_SECURITY_TYPE_BITMAP_OPEN             0x0
#define SL_WLAN_SECURITY_TYPE_BITMAP_WEP              0x1
#define SL_WLAN_SECURITY_TYPE_BITMAP_WPA              0x2
#define SL_WLAN_SECURITY_TYPE_BITMAP_WPA2             0x4

#define SL_WLAN_CIPHER_BITMAP_WEP40                   0x1
#define SL_WLAN_CIPHER_BITMAP_WEP104                  0x2
#define SL_WLAN_CIPHER_BITMAP_TKIP                    0x4
#define SL_WLAN_CIPHER_BITMAP_CCMP                    0x8

#define SL_WLAN_KEY_MGMT_SUITE_802_1_X                1
#define SL_WLAN_KEY_MGMT_SUITE_PSK                    2



#define SL_WLAN_RX_FILTER_MAX_FILTERS                 (64)    /* Max number of filters is 64 filters */
#define SL_WLAN_RX_FILTER_MAX_SYS_FILTERS_SETS        (32)    /* The Max number of system filters */
#define SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS   (2)
#define SL_WLAN_RX_FILTER_NUM_OF_FILTER_PAYLOAD_ARGS  (2)
#define SL_WLAN_RX_FILTER_RANGE_ARGS                  (2)
#define SL_WLAN_RX_FILTER_NUM_USER_EVENT_ID           (64)
#define SL_WLAN_RX_FILTER_MAX_USER_EVENT_ID           ( ( SL_WLAN_RX_FILTER_NUM_USER_EVENT_ID ) - 1 )

/*  Bit manipulation for 8 bit */
#define SL_WLAN_ISBITSET8(x,i)      ((x[i>>3] & (0x80>>(i&7)))!=0)  /* Is bit set, 8 bit unsigned numbers = x , location = i */
#define SL_WLAN_SETBIT8(x,i)        x[i>>3]|=(0x80>>(i&7));         /* Set bit,8 bit unsigned numbers = x , location = i */
#define SL_WLAN_CLEARBIT8(x,i)      x[i>>3]&=(0x80>>(i&7))^0xFF;    /* Clear bit,8 bit unsigned numbers = x , location = i */

#define SL_WLAN_DONT_UPDATE    (0x1F)
/*****************************************************************************/
/* Structure/Enum declarations                                               */
/*****************************************************************************/

typedef enum
{
    SL_WLAN_RATE_1M         = 1,
    SL_WLAN_RATE_2M         = 2,
    SL_WLAN_RATE_5_5M       = 3,
    SL_WLAN_RATE_11M        = 4,
    SL_WLAN_RATE_6M         = 6,
    SL_WLAN_RATE_9M         = 7,
    SL_WLAN_RATE_12M        = 8,
    SL_WLAN_RATE_18M        = 9,
    SL_WLAN_RATE_24M        = 10,
    SL_WLAN_RATE_36M        = 11,
    SL_WLAN_RATE_48M        = 12,
    SL_WLAN_RATE_54M        = 13,
    SL_WLAN_RATE_MCS_0      = 14,
    SL_WLAN_RATE_MCS_1      = 15,
    SL_WLAN_RATE_MCS_2      = 16,
    SL_WLAN_RATE_MCS_3      = 17,
    SL_WLAN_RATE_MCS_4      = 18,
    SL_WLAN_RATE_MCS_5      = 19,
    SL_WLAN_RATE_MCS_6      = 20,
    SL_WLAN_RATE_MCS_7      = 21,
    SL_WLAN_MAX_NUM_RATES   = 0xFF
}SlWlanRateIndex_e;

typedef enum
{
    SL_WLAN_DEV_PW_DEFAULT      = 0,
    SL_WLAN_DEV_PW_PIN_KEYPAD   = 1,
    SL_WLAN_DEV_PW_PUSH_BUTTON  = 4,
    SL_WLAN_DEV_PW_PIN_DISPLAY  = 5
} SlWlanP2pDevPwdMethod_e;

typedef struct
{
    _u32    Status;
    _u32    SsidLen;
    _u8     Ssid[32];
    _u32    PrivateTokenLen;
    _u8     PrivateToken[32];
}SlWlanSmartConfigStartAsyncResponse_t;

typedef struct
{
    _u16    Status;
    _u16    Padding;
}SlWlanSmartConfigStopAsyncResponse_t;

typedef struct
{
    _u16    Status;
    _u16    Padding;
}SlWlanConnFailureAsyncResponse_t;

typedef struct
{
    _u16    Status;
    _u16    Padding;
}SlWlanProvisioningStatusAsyncResponse_t;

/* rx filter event struct
  this event will be sent from the SL device
  as a result of a passed rx filter
  example:
  suppose we have a filter with an action and we set the following:
  SlWlanRxFilterAction_t Action;
  Action.UserId = 2;
  When the filter result is pass, an SlWlanEventRxFilterInfo_t event will be passed to the user as follows:
  Type will be set to 0
  bit 2 in UserActionIdBitmap will be set in this event, because 2 is the user input for the action arg above.
  an SlWlanEventRxFilterInfo_t event may have several bits set as a result of several rx filters causing different
  events to pass */

typedef struct
{
    _u8     Type;                                                          /* Currently only event type 0 is supported. */
    _u8     UserActionIdBitmap[SL_WLAN_RX_FILTER_NUM_USER_EVENT_ID / 8];   /* Bit X is set indicates that the filter with event action arg X passed. */
}SlWlanEventRxFilterInfo_t;

typedef enum
{
    ROLE_STA      = 0,
    ROLE_RESERVED = 1,
    ROLE_AP       = 2,
    ROLE_P2P      = 3,
    ROLE_TAG      = 4
}SlWlanMode_e;

typedef struct
{
    _u8     SsidLen;
    _u8     SsidName[32];
    _u8     Bssid[6];
    _u8     Padding;
} SlWlanEventConnect_t;

typedef struct
{
    _u8     SsidLen;
    _u8     SsidName[32];
    _u8     Bssid[6];
    _u8     ReasonCode;
} SlWlanEventDisconnect_t;

typedef struct
{
    _u8   Mac[6];
    _u8   Padding[2];
}SlWlanEventSTAAdded_t, SlWlanEventSTARemoved_t;


typedef struct
{
    _u8     SsidLen;
    _u8     SsidName[32];
    _u8     Bssid[6];
    _u8     Reserved;
    _u8     GoDeviceNameLen;
    _u8     GoDeviceName[32];
    _u8     Padding[3];
} SlWlanEventP2PConnect_t;

typedef struct
{
    _u8     SsidLen;
    _u8     SsidName[32];
    _u8     Bssid[6];
    _u8     ReasonCode;
    _u8     GoDeviceNameLen;
    _u8     GoDeviceName[32];
    _u8     Padding[3];
} SlWlanEventP2PDisconnect_t;

typedef struct
{
    _u8     Mac[6];
    _u8     ClDeviceNameLen;
    _u8     ClDeviceName[32];
    _u8     OwnSsidLen;
    _u8     OwnSsid[32];
}SlWlanEventP2PClientAdded_t, SlWlanEventP2PClientRemoved_t;

typedef struct
{
    _u8     GoDeviceNameLen;
    _u8     GoDeviceName[32];
    _u8     Mac[6];
    _u8     WpsMethod;
}SlWlanEventP2PDevFound_t, SlWlanEventP2PRequest_t;

/**************************************************/
typedef struct
{
    _u16    Status;
    _u16    Padding;
}SlWlanEventP2PConnectFail_t;

typedef struct
{
    _u8  ProvisioningStatus;
    _u8  Role;
    _u8  WlanStatus;
    _u8  Ssidlen;
    _u8  Ssid[32];
    _u32 Reserved;
}SlWlanEventProvisioningStatus_t;

typedef struct
{
    _u32    Status;
    _u32    SsidLen;
    _u8     Ssid[32];
    _u32    ReservedLen;
    _u8     Reserved[32];
} SlWlanEventProvisioningProfileAdded_t;

typedef struct
{
    _u8  Data;            /* The values which cause the trigger */
    _u8  TriggerId;       /* Trigger index (0 .. 1)   */
    _u8  Padding[2];
}SlWlanLinkQualityAsyncEvent_t;

typedef union
{
    SlWlanEventConnect_t                         Connect;                    /* SL_WLAN_EVENT_CONNECT */
    SlWlanEventDisconnect_t                      Disconnect;                 /* SL_WLAN_EVENT_DISCONNECT */
    SlWlanEventSTAAdded_t                        STAAdded;                   /* SL_WLAN_EVENT_STA_ADDED */
    SlWlanEventSTARemoved_t                      STARemoved;                 /* SL_WLAN_EVENT_STA_REMOVED */
    SlWlanEventP2PConnect_t                      P2PConnect;                 /* SL_WLAN_EVENT_P2P_CONNECT */
    SlWlanEventP2PDisconnect_t                   P2PDisconnect;              /* SL_WLAN_EVENT_P2P_DISCONNECT */
    SlWlanEventP2PClientAdded_t                  P2PClientAdded;             /* SL_WLAN_EVENT_P2P_CLIENT_ADDED */
    SlWlanEventP2PClientRemoved_t                P2PClientRemoved;           /* SL_WLAN_EVENT_P2P_CLIENT_REMOVED */
    SlWlanEventP2PDevFound_t                     P2PDevFound;                /* SL_WLAN_EVENT_P2P_DEVFOUND */
    SlWlanEventP2PRequest_t                      P2PRequest;                 /* SL_WLAN_EVENT_P2P_REQUEST */
    SlWlanEventP2PConnectFail_t                  P2PConnectFail;             /* SL_WLAN_EVENT_P2P_CONNECTFAIL */
    SlWlanEventRxFilterInfo_t                    RxFilterInfo;               /* SL_WLAN_EVENT_RXFILTER */
    SlWlanEventProvisioningStatus_t              ProvisioningStatus;         /* SL_WLAN_EVENT_PROVISIONING_STATUS */
    SlWlanEventProvisioningProfileAdded_t        ProvisioningProfileAdded;   /* SL_WLAN_EVENT_PROVISIONING_PROFILE_ADDED */
    SlWlanLinkQualityAsyncEvent_t                LinkQualityTrigger;         /* SL_WLAN_EVENT_LINK_QUALITY_TRIGGER */
} SlWlanEventData_u;

typedef struct
{
   _u32                 Id;
   SlWlanEventData_u    Data;
} SlWlanEvent_t;

typedef struct
{
    _u32  ReceivedValidPacketsNumber;                    /* sum of the packets that been received OK (include filtered) */
    _u32  ReceivedFcsErrorPacketsNumber;                 /* sum of the packets that been dropped due to FCS error */
    _u32  ReceivedAddressMismatchPacketsNumber;          /* sum of the packets that been received but filtered out by one of the HW filters */
    _i16  AvarageDataCtrlRssi;                           /* average RSSI for all valid data packets received */
    _i16  AvarageMgMntRssi;                              /* average RSSI for all valid management packets received */
    _u16  RateHistogram[SL_WLAN_NUM_OF_RATE_INDEXES];    /* rate histogram for all valid packets received */
    _u16  RssiHistogram[SL_WLAN_SIZE_OF_RSSI_HISTOGRAM]; /* RSSI histogram from -40 until -87 (all below and above\n RSSI will appear in the first and last cells */
    _u32  StartTimeStamp;                                /* the time stamp started collecting the statistics in uSec */
    _u32  GetTimeStamp;                                  /* the time stamp called the get statistics command */
}SlWlanGetRxStatResponse_t;

typedef struct
{
    _u8 Ssid[SL_WLAN_SSID_MAX_LENGTH];
    _u8 Bssid[SL_WLAN_BSSID_LENGTH];
    _u8 SsidLen;
    _i8 Rssi;
    _i16 SecurityInfo;
    _u8 Channel;
    _i8 Reserved[1];
}SlWlanNetworkEntry_t;

typedef struct
{
    _u8 Ssid[SL_WLAN_SSID_MAX_LENGTH];
    _u8 Bssid[SL_WLAN_BSSID_LENGTH];
    _u8 SsidLen;
    _i8 Rssi;
    _i16 SecurityInfo;
    _u8 Channel;
    _i8 Reserved[1];
    /* country info extended area */
    _u8  CountryStr[2];
    _u16 Supported_2_4G_Channels;
    _u32 Supported_5_0G_Channels;
}SlWlanExtNetworkEntry_t;

typedef struct
{
    _u8   Type;
    _i8*  Key;
    _u8   KeyLen;
}SlWlanSecParams_t;

typedef struct
{
    _i8*  User;
    _u8   UserLen;
    _i8*  AnonUser;
    _u8   AnonUserLen;
    _u8   CertIndex;  /* not supported */
    _u32  EapMethod;
}SlWlanSecParamsExt_t;

typedef struct
{
    _i8   User[64];
    _u8   UserLen;
    _i8   AnonUser[64];
    _u8   AnonUserLen;
    _u8   CertIndex;  /* not supported */
    _u32  EapMethod;
}SlWlanGetSecParamsExt_t;

#define SL_WLAN_CONNECTION_PROTOCOL_STA     1
#define SL_WLAN_CONNECTION_PROTOCOL_P2PCL   2

typedef union
{
    SlWlanEventConnect_t       StaConnect;
    SlWlanEventP2PConnect_t    P2PConnect;
} SlWlanConnectionInfo_u;

typedef enum
{
    SL_WLAN_DISCONNECTED = 0,
    SL_WLAN_CONNECTED_STA,
    SL_WLAN_CONNECTED_P2PCL,
    SL_WLAN_CONNECTED_P2PGO,
    SL_WLAN_AP_CONNECTED_STATIONS
}SlWlanConnStatusFlags_e;

typedef struct
{
    _u8 Mode;       /* ROLE_STA, ROLE_AP, ROLE_P2P */
    _u8 ConnStatus; /* SlWlanConnStatusFlags_e */
    _u8 SecType;    /* Current connection security type - (0 in case of disconnect or AP mode) SL_WLAN_SEC_TYPE_OPEN, SL_WLAN_SEC_TYPE_WEP, SL_WLAN_SEC_TYPE_WPA_WPA2, SL_WLAN_SEC_TYPE_WPA_ENT, SL_WLAN_SEC_TYPE_WPS_PBC, SL_WLAN_SEC_TYPE_WPS_PIN */
    _u8 Reserved;
    SlWlanConnectionInfo_u ConnectionInfo;
}SlWlanConnStatusParam_t;

typedef struct
{
    _u32   ChannelsMask;
    _i32   RssiThreshold;
}SlWlanScanParamCommand_t;

typedef struct
{
    _u32   ChannelsMask;
    _i32   RssiThreshold;
}SlWlanScanParam2GCommand_t;

typedef struct
{
    _u32   ChannelsMask;
    _i32   RssiThreshold;
}SlWlanScanParam5GCommand_t;

typedef enum {
    REGION_FCC = 0,
    REGION_ETSI,
    REGION_JP, 
    REGION_WW, 
    REGION_NO_LIMIT
} Region_e;

typedef struct{
    _u8  Region;                  /* (0-FCC, 1-ETSI, 2-JP) */
    _u8  Padding[3];
    _u32 Active_2_4G_Channels;
    _u32 Active_5_0G_Channels;
    _u32 Dfs_5_0G_Channels;
}SlWlanUserCountryAttrib_t;

typedef struct
{
    _u8   Id;
    _u8   Oui[3];
    _u16  Length;
    _u8   Data[252];
} SlWlanInfoElement_t;

typedef struct
{
    _u8          Index;  /* 0 - SL_WLAN_MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED */
    _u8          Role;   /* bit0: AP = 0, GO = 1                    */
    SlWlanInfoElement_t   IE;
} SlWlanSetInfoElement_t;

typedef struct
{
    _u8         PowerMgtBitMask; /* Allows the user to activate the IoT LP feature only if several features are supported by the AP */
                                 /* SL_WLAN_IOTLP_BITMAP_FORCE_DMS, SL_WLAN_IOTLP_BITMAP_FORCE_PROXY_ARP */
    _u8         Reserved;
    _u16        Reserved2;
    _u16        MaxSleepTimeMs;   /* max sleep time in mSec For setting Long Sleep Interval policy use */
    _u16        Reserved3;
} SlWlanPmPolicyParams_t;

typedef enum
{
    SL_WLAN_METRIC_EVENT_RSSI_BEACON  = 0,
    SL_WLAN_METRIC_EVENT_RSSI_DATA    = 1
} SlWlanMetricEvent_e;

typedef enum
{
    SL_WLAN_RX_QUALITY_EVENT_LEVEL = 0,  /* The event is a "Level" indication which keeps */
                                         /* triggering as long as the average RSSI is below*/
                                         /* the threshold.*/

    SL_WLAN_RX_QUALITY_EVENT_EDGE  = 1   /* The event is an "Edge" indication which triggers*/
                                         /* only when the RSSI threshold is crossed from above.*/
} SlWlanRxQualityEventType_e;

typedef enum
{
    SL_WLAN_RSSI_EVENT_DIR_LOW   = 0,
    SL_WLAN_RSSI_EVENT_DIR_HIGH  = 1,
    SL_WLAN_RSSI_EVENT_DIR_BIDIR = 2,
    SL_WLAN_RSSI_EVENT_SHIFT     = 3
} SlWlanRssiEventDir_e;

typedef struct
{
    _i16 Threshold;       /* Input event Threshold. Units: dBm / dB ; Range: (-100 .. 100)                        */
    _u16 Pacing;          /* Minimum delay between consecutive events. Units: milliseconds ; Range:  (0 .. 60000) */
    _u8  Metric;          /* 0 - RSSI Beacon, 1 - RSSI Packet. Applicable only for CC3x35 SL devices                     */
    _u8  Type;            /* 0 - Level, 1 - Edge. Applicable only for CC3x35 SL devices                                          */
    _u8  Direction;       /* 0 - Low, 1 - High, 2 - Bidirectional. Applicable only for CC3x35 SL devices                  */
    _u8  Hysteresis;      /* Hysteresis range around the threshold value. Units: dB ; Threshold range: (0 .. 255) */
    _u8  TriggerId;       /* Trigger index (0 .. 1). Applicable only for CC3x35 SL devices                                    */
    _u8  Enable;          /* Event Enable. 0 - Disable, 1 - Enable                                           */
    _u8  Padding[2];
} SlWlanRegisterLinkQualityEvents_t;

typedef enum
{
    SL_WLAN_COEX_MODE_DISABLED,
    SL_WLAN_COEX_BASIC_SINGLE_ANTENNA                                                 /*BLE coex with shared antenna (switch)*/
}SlWlanCoexMode_e;

typedef struct
{
    _u8 Mode;                                                                           /* see SlWlanCoexMode_e */   
    _u8 InputPad;                                                                       /* Input pad from external syncing device */
    _u8 OutputPad;                                                                      /* Output pad to external synced device (or switch)*/
    _u8 Reserved;
    _u32 Options;                                                                       /* Set to zero - not supported */
}SlWlanCoexConfig_t;

typedef enum
{
    SL_WLAN_ANT_SELECTION_DISABLED,         /* Antenna selection disabled */
    SL_WLAN_ANT_SELECTION_ANT1,             /* Antenna selection - use only antenna 1 */
    SL_WLAN_ANT_SELECTION_ANT2,             /* Antenna selection - use only antenna 2 */
    SL_WLAN_ANT_SELECTION_AUTO,             /* Antenna selection - automatic antenna selection during connection. Applicable only for CC3x35 SL devices */
    SL_WLAN_ANT_SELECTION_MANUAL            /* Antenna selection - manual antenna selection while connected. Applicable only for CC3x20 SL devices */
}SlWlanAntSelectionMode_e;

typedef struct
{
    _u8  Mode;                                                                           /* see SlWlanAntSelectionMode_e */ 
    _u8  Ant1Pad;                                                                        /* Antenna selection pad (not pin!) */
    _u8  Ant2Pad;                                                                        /* Antenna selection pad (not pin!) */
    _u8  Reserved;
    _u32 Options;                                                                       /* Set to zero - not supported */
}SlWlanAntSelectionConfig_t;

typedef enum
{
    SL_WLAN_ANT_IDX_1 = 1,        /* Antenna index 1 */
    SL_WLAN_ANT_IDX_2,            /* Antenna index 2 */
    SL_WLAN_ANT_TOGGLE,            /* Antenna toggle */
    SL_WLAN_ANT_NUM_OF_IDXS
}SlWlanAntIndex_e;

typedef struct SetAntennaCmd
{
    SlWlanAntIndex_e                 AntIndex;                        /* antenna index - 1, 2 or toggle*/
}SetAntennaIndex_t;

typedef struct
{
    _u16 BeaconInterval; // Represented in Time Units (TU), where 1 TU equal to 1.024 msec. Range: [15-65535]
    _u8  DTIMPeriod;     // Range: [1-255]
    _u8  reserved[17];   // For future use
}SlWlanExtConnectionInfo_t;


typedef  _i8    SlWlanRxFilterID_t; /* Unique filter ID which is allocated by the system , negative number means error */

/*  Representation of filters Id as a bit field
    The bit field is used to declare which filters are involved
    in operation. Number of filter can be up to 128 filters.
    i.e. 128 bits are needed. On the current release, up to 64 filters can be defined. */
typedef _u8   SlWlanRxFilterIdMask_t[128/8];

typedef _u8  SlWlanRxFilterSysFilters_t; /* Describes the supported system filter sets*/
/* possible values for SlWlanRxFilterSysFilters_t */
#define SL_WLAN_RX_FILTER_ARP_AUTO_REPLY_SYS_FILTERS       (0)
#define SL_WLAN_RX_FILTER_MULTICASTSIPV4_SYS_FILTERS       (1)
#define SL_WLAN_RX_FILTER_MULTICASTSIPV6_SYS_FILTERS       (2)
#define SL_WLAN_RX_FILTER_MULTICASTSWIFI_SYS_FILTERS       (3)
#define SL_WLAN_RX_FILTER_SELF_MAC_ADDR_DROP_SYS_FILTERS   (4)

/*  Describes the supported system filter sets, each bit represents different system filter set
    The filter sets are defined at SlWlanRxFilterSysFilters_t  */
typedef _u8   SlWlanRxFilterSysFiltersMask_t[SL_WLAN_RX_FILTER_MAX_SYS_FILTERS_SETS/8];

typedef struct 
{
    _u16    Offset;     /*  Offset in payload - Where in the payload to search for the pattern */
    _u8     Length;     /* Pattern Length */
    _u8     Reserved;
    _u8     Value[16];  /* Up to 16 bytes long (based on pattern length above) */
}SlWlanRxFilterPatternArg_t;

typedef _u8 SlWlanRxFilterRuleType_t; /* Different filter types */
/* possible values for SlWlanRxFilterRuleType_t */
#define SL_WLAN_RX_FILTER_HEADER                    (0)
#define SL_WLAN_RX_FILTER_COMBINATION               (1)

typedef _u8 SlWlanRxFilterFlags_u;
/* Possible values for SlWlanRxFilterFlags_u */
#define SL_WLAN_RX_FILTER_BINARY                    (0x1)
#define SL_WLAN_RX_FILTER_PERSISTENT                (0x8)
#define SL_WLAN_RX_FILTER_ENABLE                    (0x10)

/* Used as comparison function for the header type arguments */
typedef _u8 SlWlanRxFilterRuleHeaderCompareFunction_t;
/* Possible values for SlWlanRxFilterRuleHeaderCompareFunction_t */
#define SL_WLAN_RX_FILTER_CMP_FUNC_IN_BETWEEN       (0)
#define SL_WLAN_RX_FILTER_CMP_FUNC_EQUAL            (1)
#define SL_WLAN_RX_FILTER_CMP_FUNC_NOT_EQUAL_TO     (2)
#define SL_WLAN_RX_FILTER_CMP_FUNC_NOT_IN_BETWEEN   (3)

typedef _u8 SlWlanRxFilterTriggerCompareFunction_t;
/* Possible values for SlWlanRxFilterTriggerCompareFunction_t */
#define SL_WLAN_RX_FILTER_TRIGGER_CMP_FUNC_EQUAL                        (0)
#define SL_WLAN_RX_FILTER_TRIGGER_CMP_FUNC_NOT_EQUAL_TO                 (1) /*   arg1 == protocolVal ,not supported in current release */
#define SL_WLAN_RX_FILTER_TRIGGER_CMP_FUNC_SMALLER_THAN                 (2) /*   arg1 == protocolVal */
#define SL_WLAN_RX_FILTER_TRIGGER_CMP_FUNC_BIGGER_THAN                  (3) /*   arg1 == protocolVal */

typedef _u8 SlWlanRxFilterRuleHeaderField_t; /* Provides list of possible header types which may be defined as part of the rule */
/* Possible values for SlWlanRxFilterRuleHeaderField_t */
#define SL_WLAN_RX_FILTER_HFIELD_NULL                     (0)
#define SL_WLAN_RX_FILTER_HFIELD_FRAME_TYPE               (1) /* 802.11 control\data\management */
#define SL_WLAN_RX_FILTER_HFIELD_FRAME_SUBTYPE            (2) /*  802.11 beacon\probe\.. */
#define SL_WLAN_RX_FILTER_HFIELD_BSSID                    (3)  /*  802.11 bssid type */
#define SL_WLAN_RX_FILTER_HFIELD_MAC_SRC_ADDR             (4)
#define SL_WLAN_RX_FILTER_HFIELD_MAC_DST_ADDR             (5)
#define SL_WLAN_RX_FILTER_HFIELD_FRAME_LENGTH             (6)
#define SL_WLAN_RX_FILTER_HFIELD_ETHER_TYPE               (7)
#define SL_WLAN_RX_FILTER_HFIELD_IP_VERSION               (8)
#define SL_WLAN_RX_FILTER_HFIELD_IP_PROTOCOL              (9)  /* TCP / UDP / ICMP / ICMPv6 / IGMP */
#define SL_WLAN_RX_FILTER_HFIELD_IPV4_SRC_ADDR            (10)
#define SL_WLAN_RX_FILTER_HFIELD_IPV4_DST_ADDR            (11)
#define SL_WLAN_RX_FILTER_HFIELD_IPV6_SRC_ADRR            (12)
#define SL_WLAN_RX_FILTER_HFIELD_IPV6_DST_ADDR            (13)
#define SL_WLAN_RX_FILTER_HFIELD_PORT_SRC                 (14)
#define SL_WLAN_RX_FILTER_HFIELD_PORT_DST                 (15)
#define SL_WLAN_RX_FILTER_HFIELD_L4_PAYLOAD_PATTERN       (19) /* use to look for patterns on the TCP and UDP payloads (after TCP/UDP header) */
#define SL_WLAN_RX_FILTER_HFIELD_L1_PAYLOAD_PATTERN       (20) /* use to look for patterns on the PHY payload (i.e. beginning of WLAN MAC header) */
#define SL_WLAN_RX_FILTER_HFIELD_MAX_FIELD                (21) /* Definition */

/* Holds the header ARGS which are used in case of HDR rule */
typedef union 
{
    /* buffer for pattern matching in payload up to 16 bytes (Binary Values) */
    SlWlanRxFilterPatternArg_t  Pattern;

    /* Buffer for ipv4 address filter. binary arguments, number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS*/
    _u8 Ipv4[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][4]; /*  Binary Values for comparison */

    /* Buffer for ipv4 address filter. Ascii arguments - IPv4 address: 4 bytes: ddd.ddd.ddd.ddd - 15 chars. Number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS*/
    _u8 Ipv4Ascii[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][16]; /*  Ascii Values for comparison */

    /* Buffer for ipv6 address filter. binary arguments, Ascii format is not supported. number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS*/
    _u8 Ipv6[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][16]; /*  Binary Values for comparison */

    /* Buffer for mac address filter. binary arguments.  number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS*/
    _u8 Mac[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][6]; /*  Binary Values for comparison */

    /* Buffer for mac address filter. Ascii arguments - MAC address:  6 bytes: xx:xx:xx:xx:xx:xx - 17 chars.  number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS */
    _u8 MacAscii[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][18]; /*  Ascii Values for comparison */

    /* Buffer for BSSID address filter. binary arguments.  number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS*/
    _u8 Bssid[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][6]; /*  Binary Values for comparison */

    /* Buffer for frame length filter. number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS */
    _u32 FrameLength[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS]; /*  Binary Values for comparison */

    /* Buffer for port filter. number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS */
    _u32 Port[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS]; /*  Binary Values for comparison */

    /* Buffer for Ether filter. number of argument may be up to SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS (according to host endianity) */
    _u32 EtherType[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS]; /*  Binary Values for comparison */

    /* Buffer for ip version filter. Buffer for binary arguments. IP Version - 4 for IPV4 and 6 for IPV6  */
    _u8 IpVersion;

    /* Buffer for frame type filter. Buffer for binary arguments. Frame Type (0 - management, 1 - Control, 2 - Data)  */
    _u8 Frametype[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS];

    /* Buffer for frame subtype filter. Buffer for binary arguments. Frame Sub Type (checkout the full list in the 802.11 spec). e.g. Beacon=0x80, Data=0x08, Qos-Data=0x04, ACK=0xD4, etc. */
    _u8 FrameSubtype[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS];

    /* Buffer for protocol type filter. Buffer for binary arguments. e.g. 1 – ICMP (IPV4 only), 2 - IGMP (IPV4 only), 6 – TCP. 17 – UDP, 58 – ICMPV6 */
    _u8 IpProtocol[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS];

    /* Buffer for ip version filter. Buffer for ASCII arguments. Use for IP version field comparison settings: "IPV4", "IPV6"  */
    _u8 IpVersionAscii[4];

    /* Buffer for frame type filter. Buffer for ASCII arguments. Use for Frame type field comparison settings: "MGMT", "CTRL", "DATA"  */
    _u8 FrametypeAscii[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][4];

    /* Buffer for protocol type filter. Buffer for ASCII arguments. Use for protocol field comparison settings: "ICMP", "IGMP", "TCP, "UDP", "ICMP6"  */
    /* Note: Use memcpy with these strings instead of strcpy (no \0 should be at the end, as the array is 5 bytes long and ICMP6 is already 5 bytes long without the \0) */
    _u8 IpProtocolAscii[SL_WLAN_RX_FILTER_NUM_OF_FILTER_HEADER_ARGS][5];

}SlWlanRxFilterHeaderArg_u;

/* Defines the Header Args and mask */
typedef struct
{
    SlWlanRxFilterHeaderArg_u                   Value; /* Argument for the comparison function */
    _u8                                         Mask[16];  /* the mask is used in order to enable partial comparison (bit level), Use the 0xFFFFFFFF in case you don't want to use mask */

}SlWlanRxFilterRuleHeaderArgs_t;

/* defines the Header rule. The header rule defines the compare function on the protocol header
   For example destMacAddre is between ( 12:6::78:77,  12:6::78:90 ) */
typedef struct 
{
    SlWlanRxFilterRuleHeaderArgs_t              Args; /* Filter arguments */
    SlWlanRxFilterRuleHeaderField_t             Field; /* Packet HDR field which will be compared to the argument */
    SlWlanRxFilterRuleHeaderCompareFunction_t   CompareFunc; /*  type of the comparison function */
    _u8                                         Padding[2];
}SlWlanRxFilterRuleHeader_t;

/* Optional operators for the combination type filterID1 is located in the first arg , filterId2 is the second arg */
typedef _u8 SlWlanRxFilterRuleCombinationOperator_t;
/* Possible values for SlWlanRxFilterRuleCombinationOperator_t */
#define SL_WLAN_RX_FILTER_COMBINED_FUNC_NOT     (0) /* filterID1 */
#define SL_WLAN_RX_FILTER_COMBINED_FUNC_AND     (1) /* filterID1 && filterID2 */
#define SL_WLAN_RX_FILTER_COMBINED_FUNC_OR      (2) /* filterID1 && filterID2 */

/* Defines the structure which define the combination type filter
   The combined filter enable to make operation on one or two filter,
   for example filterId1 or and(filterId2,filterId3). */
typedef struct 
{
    SlWlanRxFilterRuleCombinationOperator_t     Operator; /* combination operator */
    SlWlanRxFilterID_t                          CombinationFilterId[SL_WLAN_RX_FILTER_RANGE_ARGS]; /* filterID, may be one or two depends on the combination operator type */
    _u8                                         Padding;
}SlWlanRxFilterRuleCombination_t;

/* Rule structure composed of behavioral flags and the filter rule definitions */
typedef union 
{
    SlWlanRxFilterRuleHeader_t                  Header; /* Filter is from type Header */
    SlWlanRxFilterRuleCombination_t             Combination; /*  Filter is from type Combination */
}SlWlanRxFilterRule_u;

/* Bit field which represents the roleId possible values
   In the current release only Station (with or without promiscuous modes) and AP roles are supported.
   Activating filters before P2P negotiations (i.e. decision whether role is CL or GO) may result with
   unexpected behaviour. After this stage, filters can be activated whereas STA role is the equivalent of P2P CL role
   AP role is the equivalent of P2P GO role.
 */
typedef _u8 SlWlanRxFilterTriggerRoles_t;
/* Possible values for SlWlanRxFilterTriggerRoles_t */
#define SL_WLAN_RX_FILTER_ROLE_AP                            (1)
#define SL_WLAN_RX_FILTER_ROLE_STA                           (2)
#define SL_WLAN_RX_FILTER_ROLE_TRANCIEVER                    (4)
#define SL_WLAN_RX_FILTER_ROLE_NULL                          (0)

typedef _u8 SlWlanRxFilterTriggerConnectionStates_t;
/* Possible values for SlWlanRxFilterTriggerConnectionStates_t */
#define SL_WLAN_RX_FILTER_STATE_STA_CONNECTED     (0x1)
#define SL_WLAN_RX_FILTER_STATE_STA_NOT_CONNECTED (0x2)
#define SL_WLAN_RX_FILTER_STATE_STA_HAS_IP        (0x4)
#define SL_WLAN_RX_FILTER_STATE_STA_HAS_NO_IP     (0x8)

/* There are 8 possible counter. if no counter is needed set to NO_TRIGGER_COUNTER */
typedef _u8 SlWlanRxFilterCounterId_t;
/* Possible values for SlWlanRxFilterCounterId_t */
#define SL_WLAN_RX_FILTER_NO_TRIGGER_COUNTER                (0)
#define SL_WLAN_RX_FILTER_COUNTER1                          (1)
#define SL_WLAN_RX_FILTER_COUNTER2                          (2)
#define SL_WLAN_RX_FILTER_COUNTER3                          (3)
#define SL_WLAN_RX_FILTER_COUNTER4                          (4)
#define SL_WLAN_RX_FILTER_COUNTER5                          (5)
#define SL_WLAN_RX_FILTER_COUNTER6                          (6)
#define SL_WLAN_RX_FILTER_COUNTER7                          (7)
#define SL_WLAN_RX_FILTER_COUNTER8                          (8)
#define SL_WLAN_RX_FILTER_MAX_COUNTER                       (9)

/* The filter trigger, determine when the filter is triggered,
   The filter is triggered in the following condition :\n
   1. The filter parent is triggered\n
   2. The requested connection type exists, i.e. wlan_connect\n
   3. The filter role is the same as the system role\n */
typedef struct
{
    SlWlanRxFilterID_t                      ParentFilterID; /* The parent filter ID, this is the way to build filter tree.  NULL value means tree root */
    SlWlanRxFilterCounterId_t               Counter; /* Trigger only when reach counter threshold */
    SlWlanRxFilterTriggerConnectionStates_t ConnectionState; /* Trigger only with specific connection state */
    SlWlanRxFilterTriggerRoles_t            Role; /* Trigger only with specific role */
    _u32                                    CounterVal;  /* Value for the counter if set */
    SlWlanRxFilterTriggerCompareFunction_t  CompareFunction; /* The compare function refers to the counter if set */
    _u8                                     Padding[3];
} SlWlanRxFilterTrigger_t;

/* The actions are executed only if the filter is matched,\n
 *  In case of false match the packet is transferred to the HOST. \n
 *  The action is composed of bit field structure, up to 2 actions can be defined per filter.\n  */
typedef _u8 SlWlanRxFilterActionType_t;
/* Possible values for SlWlanRxFilterActionType_t */
#define SL_WLAN_RX_FILTER_ACTION_NULL               (0x0) /* No action to execute*/
#define SL_WLAN_RX_FILTER_ACTION_DROP               (0x1) /* If not dropped ,The packet is passed to the next filter or in case it is the last filter to the host */
#define SL_WLAN_RX_FILTER_ACTION_ON_REG_INCREASE    (0x4) /* action increase counter registers */
#define SL_WLAN_RX_FILTER_ACTION_ON_REG_DECREASE    (0x8) /* action decrease counter registers */
#define SL_WLAN_RX_FILTER_ACTION_ON_REG_RESET       (0x10)/* action reset counter registers */
#define SL_WLAN_RX_FILTER_ACTION_SEND_TEMPLATE      (0x20)/* unsupported */
#define SL_WLAN_RX_FILTER_ACTION_EVENT_TO_HOST      (0x40)/* action can send events to host */

/* Several actions can be defined The action is executed in case the filter rule is matched. */
typedef struct
{
    SlWlanRxFilterActionType_t Type; /* Determine which actions are supported */
    _u8    Counter;    /* The counter in use. In case the action is of type increase\decrease\reset this arg will contain the counter number, The counter number values are as in  ::SlWlanRxFilterCounterId_t.\n*/
    _u16   Reserved;   /* Must be set to zero */
    _u8    UserId;     /* In case action set to host event, user can set id which will return in the event arguments */
    _u8    Padding[3];

} SlWlanRxFilterAction_t;

/* The supported operation: SL_WLAN_RX_FILTER_STATE, SL_WLAN_RX_FILTER_REMOVE */
typedef struct
{
    SlWlanRxFilterIdMask_t FilterBitmap;
    _u8 Padding[4];

} SlWlanRxFilterOperationCommandBuff_t;

/* The supported operation: SL_WLAN_RX_FILTER_UPDATE_ARGS */
typedef struct
{
    _u8  FilterId;
    _u8  BinaryOrAscii; /* Set 1 for Binary argument representation, 0 - for Ascii representation */
    _u8 Padding[2];
    SlWlanRxFilterRuleHeaderArgs_t Args;
    

} SlWlanRxFilterUpdateArgsCommandBuff_t;

/* Filters bitmap enable\disable status return value */
typedef struct 
{
    SlWlanRxFilterIdMask_t FilterIdMask; /* The filter set bit map */

}SlWlanRxFilterRetrieveStateBuff_t;

/* Disbale/Enable system filters */
typedef struct
{
    SlWlanRxFilterSysFiltersMask_t  FilterBitmap; /* The filter set bit map */

} SlWlanRxFilterSysFiltersSetStateBuff_t;

/* System filters status return value */
typedef struct
{
    SlWlanRxFilterSysFiltersMask_t  FilterBitmap; /* The filter get bit map */

} SlWlanRxFilterSysFiltersRetrieveStateBuff_t;

/*****************************************************************************/
/* Function prototypes                                                                       */
/*****************************************************************************/


#if _SL_INCLUDE_FUNC(sl_WlanConnect)
_i16 sl_WlanConnect(const _i8*  pName,const  _i16 NameLen,const _u8 *pMacAddr,const SlWlanSecParams_t* pSecParams ,const SlWlanSecParamsExt_t* pSecExtParams);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanDisconnect)
_i16 sl_WlanDisconnect(void);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanProfileAdd)
_i16 sl_WlanProfileAdd(const _i8*  pName,const  _i16 NameLen,const _u8 *pMacAddr,const SlWlanSecParams_t* pSecParams ,const SlWlanSecParamsExt_t* pSecExtParams,const _u32 Priority,const _u32  Options);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanProfileUpdate)
_i16 sl_WlanProfileUpdate(const _u32  Index, const _i8*  pName,const  _i16 NameLen,const  _u8 *pMacAddr,const  SlWlanSecParams_t* pSecParams ,const SlWlanSecParamsExt_t* pSecExtParams,const _u32  Priority);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanProfileGet)
_i16 sl_WlanProfileGet(const _i16 Index,_i8*  pName, _i16 *pNameLen, _u8 *pMacAddr, SlWlanSecParams_t* pSecParams, SlWlanGetSecParamsExt_t* pSecExtParams, _u32 *pPriority);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanProfileDel)
_i16 sl_WlanProfileDel(const _i16 Index);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanPolicySet)
_i16 sl_WlanPolicySet(const _u8 Type , const _u8 Policy, _u8 *pVal,const _u8 ValLen);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanPolicyGet)
_i16 sl_WlanPolicyGet(const _u8 Type ,_u8 *pPolicy,_u8 *pVal,_u8 *pValLen);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanGetNetworkList)
_i16 sl_WlanGetNetworkList(const _u8 Index,const  _u8 Count, SlWlanNetworkEntry_t *pEntries);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanGetExtNetworkList)
_i16 sl_WlanGetExtNetworkList(const _u8 Index,const  _u8 Count, SlWlanExtNetworkEntry_t *pEntries);
#endif


#if _SL_INCLUDE_FUNC(sl_WlanRxStatStart)
_i16 sl_WlanRxStatStart(void);
#endif



#if _SL_INCLUDE_FUNC(sl_WlanRxStatGet)
_i16 sl_WlanRxStatGet(SlWlanGetRxStatResponse_t *pRxStat,const _u32 Flags);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanRxStatStop)
_i16 sl_WlanRxStatStop(void);
#endif


#if _SL_INCLUDE_FUNC(sl_WlanProvisioning)
_i16 sl_WlanProvisioning(_u8 ProvisioningCmd, _u8 RequestedRoleAfterSuccess, _u16 InactivityTimeoutSec,  char *pSmartConfigKey, _u32 Flags);
#endif



#if _SL_INCLUDE_FUNC(sl_WlanSetMode)
_i16 sl_WlanSetMode(const _u8  Mode);
#endif


#if _SL_INCLUDE_FUNC(sl_WlanSet)
_i16 sl_WlanSet(const _u16 ConfigId ,const _u16 ConfigOpt,const _u16 ConfigLen,const  _u8 *pValues);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanGet)
_i16 sl_WlanGet(const _u16 ConfigId, _u16 *pConfigOpt,_u16 *pConfigLen, _u8 *pValues);
#endif

#if _SL_INCLUDE_FUNC(sl_WlanRxFilterAdd)
_i16 sl_WlanRxFilterAdd(    SlWlanRxFilterRuleType_t                RuleType,
                            SlWlanRxFilterFlags_u                   Flags,
                            const SlWlanRxFilterRule_u* const       pRule,
                            const SlWlanRxFilterTrigger_t* const    pTrigger,
                            const SlWlanRxFilterAction_t* const     pAction,
                            SlWlanRxFilterID_t*                     pFilterId);

#endif

#ifdef  __cplusplus
}
#endif /*  __cplusplus */

#endif    /*  __WLAN_H__ */