System Firmware Release Notes - 11.02.05
Table of Contents
Introduction
This is the release notes for SYSFW version 11.02.05.
Documentation
Refer to TISCI documentation for further details
What’s New
New features in this release:
- AM62/AM62A/AM62P: PLL SSC support for DSS PLLs
- AM62L: Support added for DeepSleep wakeup from WKUP UART
- AM62L: Add additional mailbox channel for communicating with A53_1 host
- AM275: Support for ‘IO Retention’ Low Power Mode
- AM62/AM62A/AM62P: All logs from DM R5 controlled via SYSFW boardcfg
Critical Bug Fixes:
- AM64/AM62/AM62A/AM275: Update efuse driver timing parameters and sequence
- AM62L: Configure UART only if UART tracing is enabled in boardcfg
- AM62L: Updated programming sequence of fuses in keywriter-lite mode
- AM62/AM62A/AM62P: Additional protection to internal LPM metadata
| AM65x |
2.0 |
✔️ |
|
✔️ |
| AM64x |
2.0 |
✔️ |
✔️ |
✔️ |
| AM62x |
1.0 |
✔️ |
✔️ |
✔️ |
| AM62Ax |
1.0 |
✔️ |
✔️ |
✔️ |
| AM62Px |
1.0 |
✔️ |
✔️ |
✔️ |
| AM275x |
1.0 |
✔️ |
✔️ |
✔️ |
| AM62Lx |
1.1 |
|
✔️ |
✔️ |
Fixed Issues
AM64x
AM62x
| SYSFW-7884 |
Additional divide by 4 reported on clock values of WKUP/MCU GPIO clock mux |
AM62Ax
| SYSFW-7884 |
Additional divide by 4 reported on clock values of WKUP/MCU GPIO clock mux |
AM62Px
| SYSFW-7884 |
Additional divide by 4 reported on clock values of WKUP/MCU GPIO clock mux |
AM275x
| SYSFW-8927 |
LPSC dependency data for LPSC_MCU_COMMON is wrong in SoC data |
| SYSFW-8873 |
Wrong register is used for TISCI_MSG_SYS_RESET operation |
| SYSFW-8714 |
Firewall permission for MSRAM region is set incorrectly |
| SYSFW-7884 |
Additional divide by 4 reported on clock values of WKUP/MCU GPIO clock mux |
AM62Lx
| SYSFW-8816 |
WKUP_UART usage from Linux results in LPM failure |
| SYSFW-7884 |
Additional divide by 4 reported on clock values of WKUP/MCU GPIO clock mux |
Known Issues
AM64x
| SYSFW-7457 |
Firewall exception triggered when DMA accesses the UART peripherals |
| SYSFW-6621 |
No available region to configure for Firewall ID 24 |
| SYSFW-4518 |
Security handover does not enable use of all SA2UL threads |
AM62x
| SYSFW-8950 |
LPM: DM implementation of partial I/O does not wait for ATF to hit WFI |
| SYSFW-7898 |
Switching between MCU-Only and DeepSleep mode fails after some iterations |
| SYSFW-7622 |
DeepSleep resume fails when RTC wake is set for 1 second |
AM62Ax
| SYSFW-8950 |
LPM: DM implementation of partial I/O does not wait for ATF to hit WFI |
| SYSFW-7897 |
Partial I/O mode fails after few hundred iterations |
| SYSFW-7622 |
DeepSleep resume fails when RTC wake is set for 1 second |
AM62Px
| SYSFW-8950 |
LPM: DM implementation of partial I/O does not wait for ATF to hit WFI |
| SYSFW-7897 |
Partial I/O mode fails after few hundred iterations |
| SYSFW-7622 |
DeepSleep resume fails when RTC wake is set for 1 second |
AM275x
AM62Lx
