Instance: AON_EVENT
Component: AON_EVENT
Base address: 0x40093000
This module configures the event fabric located in the AON domain.
Note: This module is only supporting 32 bit ReadWrite access from MCU
TOP:AON_EVENT Register Summary
|
Register Name
|
Type
|
Register Width (Bits)
|
Register Reset
|
Address Offset
|
Physical Address
|
|
MCUWUSEL
|
RW
|
32
|
0x3F3F 3F3F
|
0x0000 0000
|
0x4009 3000
|
|
AUXWUSEL
|
RW
|
32
|
0x003F 3F3F
|
0x0000 0004
|
0x4009 3004
|
|
EVTOMCUSEL
|
RW
|
32
|
0x002B 2B2B
|
0x0000 0008
|
0x4009 3008
|
|
RTCSEL
|
RW
|
32
|
0x0000 003F
|
0x0000 000C
|
0x4009 300C
|
TOP:AON_EVENT Register Descriptions
| Address Offset |
0x0000 0000 |
| Physical Address |
0x4009 3000 |
Instance |
0x4009 3000 |
| Description |
Wake-up Selector For MCU
This register contains pointers to 4 events which are routed to AON_WUC as wakeup sources for MCU. AON_WUC will start a wakeup sequence for the MCU domain when either of the 4 selected events are asserted. A wakeup sequence will guarantee that the MCU power switches are turned on, LDO resources are available and SCLK_HF is available and selected as clock source for MCU.
Note: It is recommended ( or required when AON_WUC:MCUCLK.PWR_DWN_SRC=NONE) to also setup a wakeup event here before MCU is requesting powerdown. ( PRCM requests uLDO, see conditions in PRCM:VDCTL.ULDO ) as it will speed up the wakeup procedure. |
| Type |
RW |
| Bits |
Field Name |
Description |
Type |
Reset |
| 31:30
|
RESERVED30 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 29:24
|
WU3_EV |
MCU Wakeup Source #3
AON Event Source selecting 1 of 4 events routed to AON_WUC for waking up the MCU domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| 23:22
|
RESERVED22 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 21:16
|
WU2_EV |
MCU Wakeup Source #2
AON Event Source selecting 1 of 4 events routed to AON_WUC for waking up the MCU domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| 15:14
|
RESERVED14 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 13:8
|
WU1_EV |
MCU Wakeup Source #1
AON Event Source selecting 1 of 4 events routed to AON_WUC for waking up the MCU domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| 7:6
|
RESERVED6 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 5:0
|
WU0_EV |
MCU Wakeup Source #0
AON Event Source selecting 1 of 4 events routed to AON_WUC for waking up the MCU domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| Address Offset |
0x0000 0004 |
| Physical Address |
0x4009 3004 |
Instance |
0x4009 3004 |
| Description |
Wake-up Selector For AUX
This register contains pointers to 3 events which are routed to AON_WUC as wakeup sources for AUX. AON_WUC will start a wakeup sequence for the AUX domain when either of the 3 selected events are asserted. A wakeup sequence will guarantee that the AUX power switches are turned on, LDO resources are available and SCLK_HF is available and selected as clock source for AUX.
Note: It is recommended ( or required when AON_WUC:AUXCLK.PWR_DWN_SRC=NONE) to also setup a wakeup event here before AUX is requesting powerdown. ( AUX_WUC:PWRDWNREQ.REQ is asserted] ) as it will speed up the wakeup procedure. |
| Type |
RW |
| Bits |
Field Name |
Description |
Type |
Reset |
| 31:22
|
RESERVED22 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 0000 0000 |
| 21:16
|
WU2_EV |
AUX Wakeup Source #2
AON Event Source selecting 1 of 3 events routed to AON_WUC for waking up the AUX domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| 15:14
|
RESERVED14 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 13:8
|
WU1_EV |
AUX Wakeup Source #1
AON Event Source selecting 1 of 3 events routed to AON_WUC for waking up the AUX domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| 7:6
|
RESERVED6 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 5:0
|
WU0_EV |
AUX Wakeup Source #0
AON Event Source selecting 1 of 3 events routed to AON_WUC for waking up the AUX domain from Power Off or Power Down.
Note:
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |
| Address Offset |
0x0000 0008 |
| Physical Address |
0x4009 3008 |
Instance |
0x4009 3008 |
| Description |
Event Selector For MCU Event Fabric
This register contains pointers for 3 AON events that are routed to the MCU Event Fabric EVENT |
| Type |
RW |
| Bits |
Field Name |
Description |
Type |
Reset |
| 31:22
|
RESERVED22 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 0000 0000 |
| 21:16
|
AON_PROG2_EV |
Event selector for AON_PROG2 event.
AON Event Source id# selecting event routed to EVENT as AON_PROG2 event.
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b10 1011 |
| 15:14
|
RESERVED14 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 13:8
|
AON_PROG1_EV |
Event selector for AON_PROG1 event.
AON Event Source id# selecting event routed to EVENT as AON_PROG1 event.
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b10 1011 |
| 7:6
|
RESERVED6 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 |
| 5:0
|
AON_PROG0_EV |
Event selector for AON_PROG0 event.
AON Event Source id# selecting event routed to EVENT as AON_PROG0 event.
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b10 1011 |
| Address Offset |
0x0000 000C |
| Physical Address |
0x4009 300C |
Instance |
0x4009 300C |
| Description |
RTC Capture Event Selector For AON_RTC
This register contains a pointer to select an AON event for RTC capture. Please refer to AON_RTC:CH1CAPT |
| Type |
RW |
| Bits |
Field Name |
Description |
Type |
Reset |
| 31:6
|
RESERVED6 |
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RO |
0b00 0000 0000 0000 0000 0000 0000 |
| 5:0
|
RTC_CH1_CAPT_EV |
AON Event Source id# for RTCSEL event which is fed to AON_RTC. Please refer to AON_RTC:CH1CAPT
| Value |
ENUM Name |
Description |
| 0x0 |
PAD0 |
Edge detect on PAD0 |
| 0x1 |
PAD1 |
Edge detect on PAD1 |
| 0x2 |
PAD2 |
Edge detect on PAD2 |
| 0x3 |
PAD3 |
Edge detect on PAD3 |
| 0x4 |
PAD4 |
Edge detect on PAD4 |
| 0x5 |
PAD5 |
Edge detect on PAD5 |
| 0x6 |
PAD6 |
Edge detect on PAD6 |
| 0x7 |
PAD7 |
Edge detect on PAD7 |
| 0x8 |
PAD8 |
Edge detect on PAD8 |
| 0x9 |
PAD9 |
Edge detect on PAD9 |
| 0xA |
PAD10 |
Edge detect on PAD10 |
| 0xB |
PAD11 |
Edge detect on PAD11 |
| 0xC |
PAD12 |
Edge detect on PAD12 |
| 0xD |
PAD13 |
Edge detect on PAD13 |
| 0xE |
PAD14 |
Edge detect on PAD14 |
| 0xF |
PAD15 |
Edge detect on PAD15 |
| 0x10 |
PAD16 |
Edge detect on PAD16 |
| 0x11 |
PAD17 |
Edge detect on PAD17 |
| 0x12 |
PAD18 |
Edge detect on PAD18 |
| 0x13 |
PAD19 |
Edge detect on PAD19 |
| 0x14 |
PAD20 |
Edge detect on PAD20 |
| 0x15 |
PAD21 |
Edge detect on PAD21 |
| 0x16 |
PAD22 |
Edge detect on PAD22 |
| 0x17 |
PAD23 |
Edge detect on PAD23 |
| 0x18 |
PAD24 |
Edge detect on PAD24 |
| 0x19 |
PAD25 |
Edge detect on PAD25 |
| 0x1A |
PAD26 |
Edge detect on PAD26 |
| 0x1B |
PAD27 |
Edge detect on PAD27 |
| 0x1C |
PAD28 |
Edge detect on PAD28 |
| 0x1D |
PAD29 |
Edge detect on PAD29 |
| 0x1E |
PAD30 |
Edge detect on PAD30 |
| 0x1F |
PAD31 |
Edge detect on PAD31 |
| 0x20 |
PAD |
Edge detect on any PAD |
| 0x23 |
RTC_CH0 |
RTC channel 0 event |
| 0x24 |
RTC_CH1 |
RTC channel 1 event |
| 0x25 |
RTC_CH2 |
RTC channel 2 event |
| 0x26 |
RTC_CH0_DLY |
RTC channel 0 - delayed event |
| 0x27 |
RTC_CH1_DLY |
RTC channel 1 - delayed event |
| 0x28 |
RTC_CH2_DLY |
RTC channel 2 - delayed event |
| 0x29 |
RTC_COMB_DLY |
RTC combined delayed event |
| 0x2A |
RTC_UPD |
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period) |
| 0x2B |
JTAG |
JTAG generated event |
| 0x2C |
AUX_SWEV0 |
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0 |
| 0x2D |
AUX_SWEV1 |
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1 |
| 0x2E |
AUX_SWEV2 |
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2 |
| 0x2F |
AUX_COMPA |
Comparator A triggered |
| 0x30 |
AUX_COMPB |
Comparator B triggered |
| 0x31 |
AUX_ADC_DONE |
ADC conversion completed |
| 0x32 |
AUX_TDC_DONE |
TDC completed or timed out |
| 0x33 |
AUX_TIMER0_EV |
AUX Timer 0 Event |
| 0x34 |
AUX_TIMER1_EV |
AUX Timer 1 Event |
| 0x35 |
BATMON_TEMP |
BATMON temperature update event |
| 0x36 |
BATMON_VOLT |
BATMON voltage update event |
| 0x37 |
AUX_COMPB_ASYNC |
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX |
| 0x38 |
AUX_COMPB_ASYNC_N |
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX |
| 0x3F |
NONE |
No event, always low |
|
RW |
0b11 1111 |