Release date: August 2, 2017
New features
- Changes that apply to all devices
- [DRV_SRC] sys_ctrl: Added configurable initial VDDR recharge period margin to permit setting a more conservative initial recharge period.
- [DRV_API] sys_ctrl: Added a new parameter to function SysCtrlAdjustRechargeAfterPowerDown().
- CC13x0
- [RF_PATCH]: GHS Added new CPE/MCE patch set for general high-speed GenFSK ("ghs" patch). CPE patch is identical to GenFSK.
- [RF_PATCH]: BREPEAT Added new CPE/MCE patch set for using bit-repeat mode ("brepeat" patch), for symbol rate. CPE patch is identical to GenFSK.
- [RF_API] Headers: In CPE commands CMD_PROP_RADIO_SETUP and CMD_PROP_RADIO_DIV_SETUP, the struct bit fields symbolRate.bPdifDecim and symbolRate.pdifDecim have been joined into one field, symbolRate.decimMode, with unchanged functionality. This change is to have same API for CC13x0 as exists for CC13x2 and CC26x2 devices. This field is needed used when using "brepeat" radio patch.
- CC13x2_CC26x2
- Initial revision of driverlib for new devices CC13x2 and CC26x2.
Improvements
- Changes that apply to all devices
- [DRV_API] sys_ctrl: Removed definition "RSTSRC_VDD_LOSS" since this value will never be returned when calling SysCtrlResetSourceGet().
- [DRV_SRC] CCFG: Removed gcc compiler warning (change of sign) when compiling ccfg.c.
- [DRV_SRC] CPU: Removed gcc compiler warning for function CPUbasepriSet().
- CC26x0R2
- [RF_PATCH] CPE BLE: Updated CPE patch for Bluetooth 4.2 to fix known issue related to CMD_SCH_IMM. This also includes a fix for a rare problem where CPE may hang when running BLE master command.
- [RF_PATCH] CPE BT5: Updated CPE patch for Bluetooth 5 to fix known issue related to CMD_SCH_IMM. This also includes a fix for a rare problem where CPE may hang when running BLE master command.
Bug fixes
- CC26x0R2
- [RF_PATCH] CPE BT5: CPE BT5 patch for Bluetooth 5: Corrected an error when ignoring identity address for resolvable private addresses in legacy advertiser.
Known issues
- CC26x0
- [RF_PATCH] General: CMD_SCH_IMM could cause loss of commands.
- CC26x0R2
- [RF_API] General: GPO control not functional. (The PA_EN status signal does not go low).
- For an updated list of known issues (including issues found after the release), see CC13xx_CC26xx_driverlib on the Texas Instruments wiki.