Platform Development Kit (PDK)

Welcome

This package consists of the Texas Instruments Platform Development Kit for J784S4 family of SoC’s .

The Texas Instruments Platform Development Kit (PDK) is a single scalable software driver package that offers streamlined development on TI’s Processors. The PDK package contains device abstraction layer libraries and peripheral/board level sample/demo examples that demonstrate the capabilities of the peripherals for development, deployment and execution of applications.

Table of Contents

• 1. Overview
  • 1.1. Introduction
  • 1.2. Scope
  • 1.3. Technical Support
  • 1.4. TI Disclaimer
• 2. Release Notes
  • 2.1. Release Notes - 11_01_00
  • 2.2. Release Notes - 11_00_00
  • 2.3. Release Notes - 10_01_00
  • 2.4. Release Notes - 10_00_00
  • 2.5. Release Notes - 09_02_01
  • 2.6. Release Notes - 09_02_00
  • 2.7. Release Notes - 09_01_00
  • 2.8. Release Notes - 09_00_00
  • 2.9. Release Notes - 08_06_00
  • 2.10. Release Notes - 08_05_00
  • 2.11. Release Notes - 08_02_02
  • 2.12. Release Notes - 08_02_01
• 3. DM Release Notes
  • 3.1. DM Release Notes - 11_01_00
  • 3.2. Release Notes - 11_00_00
• 4. Getting Started
  • 4.1. Building the PDK
  • 4.2. Supported Boards/SOCs
  • 4.3. Build Steps
  • 4.4. Library Path and Naming Convention
• 5. Modules
  • 5.1. CSL
  • 5.2. FreeRTOS
  • 5.3. SafeRTOS
  • 5.4. OSAL
  • 5.5. ENET
  • 5.6. GPIO
  • 5.7. I2C
  • 5.8. IPC
  • 5.9. MCAN
  • 5.10. McASP
  • 5.11. PM
  • 5.12. SCICLIENT
  • 5.13. SPI
  • 5.14. OSPI
  • 5.15. UART
  • 5.16. UDMA
  • 5.17. PMIC
  • 5.18. MMCSD
  • 5.19. DSS
  • 5.20. CSIRX
  • 5.21. FVID2 User Guide
  • 5.22. Safety Checkers
  • 5.23. Power Tooling
• 6. Bootloader (SBL)
  • 6.1. SBL Overview
  • 6.2. J784S4 SBL
  • 6.3. Boot App
  • 6.4. Boot HLOS
• 7. Board/EVM Abstraction
  • 7.1. Board Support
  • 7.2. UNIFLASH
• 8. How to Guides
  • 8.1. Run a Application from DDR on R5 Cores
  • 8.2. Relocation of sections at runtime
  • 8.3. Building and Running Memory Benchmarking Configurations
  • 8.4. Enable a DM Debug Application
• 9. Frequently Asked Questions
  • 9.1. FAQ - Common
  • 9.2. FAQ - CAN
  • 9.3. FAQ - FVID2
  • 9.4. FAQ - Supported Cores by example applications
  • 9.5. FAQ - Used Resources - Interrupt
  • 9.6. J784S4 UDMA Resources
  • 9.7. FAQ - How to set the clock for a given module and clock
  • 9.8. FAQ - CSI2RX
• 10. Developer Notes
  • 10.1. FreeRTOS Usage and Migration Guidelines
  • 10.2. FreeRTOS Real-time Object View (ROV)
  • 10.3. IPC LLD Migration Guide
  • 10.4. XIP Using Dummy App
  • 10.5. XIP Using Two Appimages
  • 10.6. TI ARM CLANG Usage and Migration Guidelines
  • 10.7. SafeRTOS Usage and Migration Guidelines

Support

For technical support please post your questions at http://e2e.ti.com.