Platform Development Kit (PDK) - J7200 User Guide
08_05_00
Table of Contents
1. Overview
2. Release Notes
3. Getting Started
4. Modules
5. Bootloader (SBL)
6. Board/EVM Abstraction
7. How to Guides
8. Frequently Asked Questions
8.1. FAQ - Common
8.2. FAQ - CAN
8.3. FAQ - Supported Cores by example applications
8.4. FAQ - How to set the clock for a given module and clock
9. Developer Notes
Platform Development Kit (PDK) - J7200 User Guide
Docs
»
8. Frequently Asked Questions
8. Frequently Asked Questions
ΒΆ
8.1. FAQ - Common
8.1.1. Generic
8.1.1.1. What does PDK stand for?
8.1.1.2. What do I get with PDK, and how do I get started?
8.1.2. Build
8.1.2.1. What are the common issues faced during the build?
8.1.3. Code Composer Studio
8.1.3.1. Unable to connect to MCU 11 or MCU21
8.1.3.2. CCS cannot resolve source or variables
8.1.4. BoardCfg RM
8.1.4.1. How to integrate updated RM BoardCfg in PDK?
8.2. FAQ - CAN
8.2.1. What is CAN?
8.2.2. How is bit-rate calculated?
8.2.3. What is CAN bus termination?
8.2.4. What is Transceiver Delay Compensation Value(TDCV) and how is it calculated?
8.2.5. Things to consider/check before sending a message over CAN bus
8.2.6. CAN communication failed, where to start debug?
8.3. FAQ - Supported Cores by example applications
8.3.1. Introduction
8.4. FAQ - How to set the clock for a given module and clock
8.4.1. Introduction
8.4.2. Default clock state of the system
8.4.3. Setting the clock for a device