Platform Development Kit (PDK) - J7200 User Guide
08_02_00
Table of Contents
1. Overview
2. Release Notes
3. Getting Started
4. Modules
5. Bootloader (SBL)
6. Board/EVM Abstraction
7. How to Guides
8. Frequently Asked Questions
8.1. FAQ - Common
8.2. FAQ - CAN
8.3. FAQ - Supported Cores by example applications
8.4. FAQ - How to set the clock for a given module and clock
9. Developer Notes
Platform Development Kit (PDK) - J7200 User Guide
Docs
»
8. Frequently Asked Questions
8. Frequently Asked Questions
ΒΆ
8.1. FAQ - Common
8.1.1. Generic
8.1.1.1. What does PDK stand for?
8.1.1.2. What do I get with PDK, and how do I get started?
8.1.2. Build
8.1.2.1. What are the common issues faced during the build?
8.1.3. Code Composer Studio
8.1.3.1. Unable to connect to MCU 11 or MCU21
8.2. FAQ - CAN
8.2.1. What is CAN?
8.2.2. How is bit-rate calculated?
8.2.3. What is CAN bus termination?
8.2.4. What is Transceiver Delay Compensation Value(TDCV) and how is it calculated?
8.2.5. Things to consider/check before sending a message over CAN bus
8.2.6. CAN communication failed, where to start debug?
8.3. FAQ - Supported Cores by example applications
8.3.1. Introduction
8.4. FAQ - How to set the clock for a given module and clock
8.4.1. Introduction
8.4.2. Default clock state of the system
8.4.3. Setting the clock for a device