Platform Development Kit (PDK)

Welcome

This package consists of the Texas Instruments Platform Development Kit for J7200 family of SoC’s .

The Texas Instruments Platform Development Kit (PDK) is a single scalable software driver package that offers streamlined development on TI’s Processors. The PDK package contains device abstraction layer libraries and peripheral/board level sample/demo examples that demonstrate the capabilities of the peripherals for development, deployment and execution of applications.

Table of Contents

• 1. Overview
  • 1.1. Introduction
  • 1.2. Scope
  • 1.3. Technical Support
  • 1.4. TI Disclaimer
• 2. Release Notes
  • 2.1. Release Notes - 07_03_00
  • 2.2. Release Notes - 07_01_00
• 3. Getting Started
  • 3.1. Building the PDK
  • 3.2. Supported Boards/SOCs
  • 3.3. Build Steps
  • 3.4. Library Path and Naming Convention
• 4. Modules
  • 4.1. CSL
  • 4.2. FreeRTOS
  • 4.3. OSAL
  • 4.4. GPIO
  • 4.5. I2C
  • 4.6. IPC
  • 4.7. McASP
  • 4.8. PM
  • 4.9. SCICLIENT
  • 4.10. SPI
  • 4.11. UART
  • 4.12. UDMA
  • 4.13. PMIC
  • 4.14. MMCSD
• 5. Bootloader (SBL)
  • 5.1. SBL Overview
  • 5.2. J7200 SBL
• 6. Board/EVM Abstraction
  • 6.1. Board Support
  • 6.2. Board Diagnostic Overview
  • 6.3. Board Diagnostic Execution
  • 6.4. UNIFLASH
• 7. How to Guides
  • 7.1. Run a Application from DDR on R5 Cores
  • 7.2. Relocation of sections at runtime
• 8. Frequently Asked Questions
  • 8.1. FAQ - Common
  • 8.2. FAQ - CAN
  • 8.3. FAQ - Supported Cores by example applications
  • 8.4. FAQ - How to set the clock for a given module and clock
• 9. Developer Notes
  • 9.1. IPC LLD Migration Guide
  • 9.2. XIP Programming Guide

Support

For technical support please post your questions at http://e2e.ti.com.