1    /* --COPYRIGHT--,BSD
     2     * Copyright (c) $(CPYYEAR), Texas Instruments Incorporated
     3     * All rights reserved.
     4     *
     5     * Redistribution and use in source and binary forms, with or without
     6     * modification, are permitted provided that the following conditions
     7     * are met:
     8     *
     9     * *  Redistributions of source code must retain the above copyright
    10     *    notice, this list of conditions and the following disclaimer.
    11     *
    12     * *  Redistributions in binary form must reproduce the above copyright
    13     *    notice, this list of conditions and the following disclaimer in the
    14     *    documentation and/or other materials provided with the distribution.
    15     *
    16     * *  Neither the name of Texas Instruments Incorporated nor the names of
    17     *    its contributors may be used to endorse or promote products derived
    18     *    from this software without specific prior written permission.
    19     *
    20     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
    21     * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
    22     * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    23     * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
    24     * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
    25     * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
    26     * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
    27     * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
    28     * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
    29     * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
    30     * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    31     * --/COPYRIGHT--*/
    32    /*
    33     *  ======== NotifySetup.xdc ========
    34     *
    35     *! Revision History
    36     *! ================
    37     */
    38     
    39    /*!
    40     *  ======== NotifySetup ======== 
    41     *  Manages setup of the default Notify driver handles
    42     *
    43     *  Creates the default notify drivers for each pair of processors. 
    44     */
    45    module NotifySetup inherits ti.sdo.ipc.interfaces.INotifySetup
    46    {
    47        /*! Possible incoming interrupt IDs for DaVinci/DSP */
    48        enum DSP_INT {
    49            DSP_INT0 = 16,
    50            DSP_INT1 = 17,
    51            DSP_INT2 = 18,
    52            DSP_INT3 = 19
    53        }
    54        
    55        /*! Possible incoming interrupt IDs for DaVinci/ARM */
    56        enum ARM_INT {
    57            ARM_INT0 = 46,
    58            ARM_INT1 = 47
    59        }
    60    
    61        /*! 
    62         *  Incoming interrupt ID for line #0 line on DSP 
    63         *
    64         *  See {@link #DSP_INT} for possible values.
    65         */
    66        config UInt dspRecvIntId0 = DSP_INT0;
    67        
    68        /*! Vector ID to use on DSP for line #0 */    
    69        config UInt dspIntVectId0 = 5;
    70        
    71        /*! 
    72         *  Incoming interrupt ID for line #0 line on ARM 
    73         *
    74         *  See {@link #ARM_INT} for possible values.
    75         */
    76        config UInt armRecvIntId0 = ARM_INT0;
    77        
    78        /*! Enable the second interrupt line on DaVinci */
    79        config Bool useSecondLine = false;
    80        
    81        /*! 
    82         *  Incoming interrupt ID for line #1 line on DSP 
    83         *
    84         *  See {@link #DSP_INT} for possible values.
    85         */
    86        config UInt dspRecvIntId1 = DSP_INT1;
    87        
    88        /*! Vector ID to use on DSP for line #1 */
    89        config UInt dspIntVectId1 = 6;
    90        
    91        /*! 
    92         *  Incoming interrupt ID for line #1 line on ARM 
    93         *
    94         *  See {@link #ARM_INT} for possible values.
    95         */
    96        config UInt armRecvIntId1 = ARM_INT1;
    97        
    98    internal:
    99    
   100    }