1    /* --COPYRIGHT--,BSD
     2     * Copyright (c) $(CPYYEAR), Texas Instruments Incorporated
     3     * All rights reserved.
     4     *
     5     * Redistribution and use in source and binary forms, with or without
     6     * modification, are permitted provided that the following conditions
     7     * are met:
     8     *
     9     * *  Redistributions of source code must retain the above copyright
    10     *    notice, this list of conditions and the following disclaimer.
    11     *
    12     * *  Redistributions in binary form must reproduce the above copyright
    13     *    notice, this list of conditions and the following disclaimer in the
    14     *    documentation and/or other materials provided with the distribution.
    15     *
    16     * *  Neither the name of Texas Instruments Incorporated nor the names of
    17     *    its contributors may be used to endorse or promote products derived
    18     *    from this software without specific prior written permission.
    19     *
    20     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
    21     * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
    22     * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    23     * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
    24     * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
    25     * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
    26     * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
    27     * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
    28     * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
    29     * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
    30     * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    31     * --/COPYRIGHT--*/
    32    /*
    33     *  ======== NotifySetup.xdc ========
    34     *
    35     *! Revision History
    36     *! ================
    37     *! 23-Nov-2009 skp Fixed ARM_INT values
    38     */
    39     
    40    import ti.sdo.utils.MultiProc;
    41    
    42    /*!
    43     *  ======== NotifySetup ======== 
    44     *  Manages setup of the default Notify driver handles
    45     *
    46     *  Creates the default notify drivers for each pair of processors. 
    47     */
    48    module NotifySetup inherits ti.sdo.ipc.interfaces.INotifySetup
    49    {
    50        /*! Possible incoming interrupt IDs for DSP */
    51        enum DSP_INT {
    52            DSP_INT0 = 5,
    53            DSP_INT1 = 67
    54        }
    55        
    56        /*! Possible incoming interrupt IDs for ARM */
    57        enum ARM_INT {
    58            ARM_INT0 = 28,
    59            ARM_INT1 = 29
    60        }
    61    
    62        /*! 
    63         *  Incoming interrupt ID for line #0 line on DSP 
    64         *
    65         *  See {@link #DSP_INT} for possible values.
    66         */
    67        config UInt dspRecvIntId0 = DSP_INT0;
    68        
    69        /*! Vector ID to use on DSP for line #0 */    
    70        config UInt dspIntVectId0 = 5;
    71        
    72        /*! 
    73         *  Incoming interrupt ID for line #0 line on ARM 
    74         *
    75         *  See {@link #ARM_INT} for possible values.
    76         */
    77        config UInt armRecvIntId0 = ARM_INT0;
    78        
    79        /*! Enable the second interrupt line */
    80        config Bool useSecondLine = false;
    81        
    82        /*! 
    83         *  Incoming interrupt ID for line #1 line on DSP 
    84         *
    85         *  See {@link #DSP_INT} for possible values.
    86         */
    87        config UInt dspRecvIntId1 = DSP_INT1;
    88        
    89        /*! Vector ID to use on DSP for line #1 */
    90        config UInt dspIntVectId1 = 6;
    91        
    92        /*! 
    93         *  Incoming interrupt ID for line #1 line on ARM 
    94         *
    95         *  See {@link #ARM_INT} for possible values.
    96         */
    97        config UInt armRecvIntId1 = ARM_INT1;
    98        
    99    internal:
   100    
   101    }