1    /* --COPYRIGHT--,BSD
     2     * Copyright (c) $(CPYYEAR), Texas Instruments Incorporated
     3     * All rights reserved.
     4     *
     5     * Redistribution and use in source and binary forms, with or without
     6     * modification, are permitted provided that the following conditions
     7     * are met:
     8     *
     9     * *  Redistributions of source code must retain the above copyright
    10     *    notice, this list of conditions and the following disclaimer.
    11     *
    12     * *  Redistributions in binary form must reproduce the above copyright
    13     *    notice, this list of conditions and the following disclaimer in the
    14     *    documentation and/or other materials provided with the distribution.
    15     *
    16     * *  Neither the name of Texas Instruments Incorporated nor the names of
    17     *    its contributors may be used to endorse or promote products derived
    18     *    from this software without specific prior written permission.
    19     *
    20     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
    21     * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
    22     * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    23     * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
    24     * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
    25     * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
    26     * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
    27     * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
    28     * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
    29     * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
    30     * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    31     * --/COPYRIGHT--*/
    32    /*
    33     *  ======== NotifyCircSetup.xdc ========
    34     */
    35     
    36    import ti.sdo.utils.MultiProc;
    37    
    38    /*!
    39     *  ======== NotifyCircSetup ======== 
    40     *  Manages setup of the default Notify driver handles
    41     *
    42     *  Creates the default notify drivers for each pair of processors. 
    43     */
    44    module NotifyCircSetup inherits ti.sdo.ipc.interfaces.INotifySetup
    45    {
    46        /*! Possible incoming interrupt IDs for DSP */
    47        enum DSP_INT {
    48            DSP_INT0 = 5,
    49            DSP_INT1 = 67
    50        }
    51        
    52        /*! Possible incoming interrupt IDs for ARM */
    53        enum ARM_INT {
    54            ARM_INT0 = 28,
    55            ARM_INT1 = 29
    56        }
    57    
    58        /*! 
    59         *  Incoming interrupt ID for line #0 line on DSP 
    60         *
    61         *  See {@link #DSP_INT} for possible values.
    62         */
    63        config UInt dspRecvIntId0 = DSP_INT0;
    64        
    65        /*! Vector ID to use on DSP for line #1 */    
    66        config UInt dspIntVectId0 = 5;
    67        
    68        /*! 
    69         *  Incoming interrupt ID for line #0 line on ARM 
    70         *
    71         *  See {@link #ARM_INT} for possible values.
    72         */
    73        config UInt armRecvIntId0 = ARM_INT0;
    74        
    75        /*! Enable the second interrupt line */
    76        config Bool useSecondLine = false;
    77        
    78        /*! 
    79         *  Incoming interrupt ID for line #1 line on DSP 
    80         *
    81         *  See {@link #DSP_INT} for possible values.
    82         */
    83        config UInt dspRecvIntId1 = DSP_INT1;
    84        
    85        /*! Vector ID to use on DSP for line #1 */
    86        config UInt dspIntVectId1 = 6;
    87        
    88        /*! 
    89         *  Incoming interrupt ID for line #1 line on ARM 
    90         *
    91         *  See {@link #ARM_INT} for possible values.
    92         */
    93        config UInt armRecvIntId1 = ARM_INT1;
    94        
    95    internal:
    96    
    97    }