1 /* 2 * Copyright (c) 2014 Texas Instruments Incorporated - https://www.ti.com 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * * Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * * Neither the name of Texas Instruments Incorporated nor the names of 17 * its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * ======== InterruptDsp.xdc ======== 35 */ 36 package ti.sdo.ipc.family.tda3xx; 37 38 import ti.sdo.utils.MultiProc; 39 import xdc.rov.ViewInfo; 40 41 /*! 42 * ======== InterruptDsp ======== 43 * DSP interrupt manager 44 */ 45 module InterruptDsp inherits ti.sdo.ipc.notifyDrivers.IInterrupt 46 { 47 /*! @_nodoc */ 48 metaonly struct InterruptDataView { 49 String remoteProcName; 50 Bool registered; 51 Bool enabled; 52 Bool intPending; 53 Ptr payload; 54 }; 55 56 /*! @_nodoc */ 57 // @Facet 58 // metaonly config xdc.rov.ViewInfo.Instance rovViewInfo = 59 // xdc.rov.ViewInfo.create({ 60 // viewMap: [ 61 // ['IncomingInterrupts', 62 // { 63 // type: xdc.rov.ViewInfo.MODULE_DATA, 64 // viewInitFxn: 'viewInitInterrupt', 65 // structName: 'InterruptDataView' 66 // } 67 // ], 68 // ] 69 // }); 70 71 /* Total number of cores on SoC */ 72 const UInt8 NUM_CORES = 5; 73 74 /* Number of Cores in EVE Sub-system */ 75 const UInt8 NUM_EVES = 1; 76 77 /* Number of Cores in DSP Sub-system */ 78 // const UInt8 NUM_DSP_CORES = 2; 79 80 /* Number of Internal EVE mailboxes */ 81 const UInt8 NUM_EVE_MBX = 2; 82 83 /* Number of System Mailboxes */ 84 const UInt8 NUM_SYS_MBX = 1; 85 86 /* Base address for the Mailbox subsystem */ 87 config UInt32 mailboxBaseAddr[NUM_EVE_MBX + NUM_SYS_MBX]; 88 89 internal: 90 91 /* 92 * Mailbox table for storing encoded Base Address, mailbox user Id, 93 * and sub-mailbox index. 94 */ 95 config UInt32 mailboxTable[NUM_CORES * NUM_CORES]; 96 97 config UInt32 procIdTable[NUM_CORES]; 98 99 /*! Statically retrieve procIds to avoid doing this at runtime */ 100 config UInt eve1ProcId = MultiProc.INVALIDID; 101 config UInt dsp1ProcId = MultiProc.INVALIDID; 102 config UInt dsp2ProcId = MultiProc.INVALIDID; 103 config UInt ipu1_0ProcId = MultiProc.INVALIDID; 104 config UInt ipu1_1ProcId = MultiProc.INVALIDID; 105 106 /*! Function table */ 107 struct FxnTable { 108 Fxn func; 109 UArg arg; 110 } 111 112 /*! 113 * ======== intShmStub ======== 114 * Stub to be plugged 115 */ 116 Void intShmStub(UInt16 idx); 117 118 struct Module_State { 119 /* 120 * Create a function table of length (Total number of cores in the 121 * System) for each DSP core. 122 */ 123 FxnTable fxnTable[NUM_CORES]; 124 }; 125 }