1 /* 2 * Copyright (c) 2012-2013, Texas Instruments Incorporated 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * * Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * * Neither the name of Texas Instruments Incorporated nor the names of 17 * its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 /* 33 * ======== NotifyCircSetup.xdc ======== 34 * 35 */ 36 37 import ti.sdo.utils.MultiProc; 38 import xdc.runtime.Error; 39 40 /*! 41 * ======== NotifyCircSetup ======== 42 * Notify setup proxy for OMAP4430 43 * 44 * This module creates and registers all drivers necessary for inter-processor 45 * notification on OMAP4430. 46 */ 47 48 module NotifyCircSetup inherits ti.sdo.ipc.interfaces.INotifySetup 49 { 50 /*! 51 * Assert raised when trying to attach between OMAP4430/CORE1 and 52 * either the DSP or the HOST 53 */ 54 config Error.Id E_noInterruptLine = { 55 msg: "E_noInterruptLine: Trying to attach between CORE1 and %s" 56 }; 57 58 /*! 59 * Interrupt vector id for OMAP4430/DSP. 60 */ 61 config UInt dspIntVectId = 5; 62 63 internal: 64 65 config UInt dspProcId = MultiProc.INVALIDID; 66 config UInt core0ProcId = MultiProc.INVALIDID; 67 config UInt core1ProcId = MultiProc.INVALIDID; 68 config UInt hostProcId = MultiProc.INVALIDID; 69 }