1 /* 2 * Copyright (c) 2012-2013, Texas Instruments Incorporated 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * * Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * * Neither the name of Texas Instruments Incorporated nor the names of 17 * its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 /* 33 * ======== NotifySetup.xdc ======== 34 * 35 */ 36 37 import ti.sdo.utils.MultiProc; 38 39 /*! 40 * ======== NotifySetup ======== 41 * Manages setup of the default Notify driver handles 42 * 43 * Creates the default notify drivers for each pair of processors. 44 */ 45 module NotifySetup inherits ti.sdo.ipc.interfaces.INotifySetup 46 { 47 /*! Possible incoming interrupt IDs for DSP */ 48 enum DSP_INT { 49 DSP_INT0 = 5, 50 DSP_INT1 = 67 51 } 52 53 /*! Possible incoming interrupt IDs for ARM */ 54 enum ARM_INT { 55 ARM_INT0 = 28, 56 ARM_INT1 = 29 57 } 58 59 /*! 60 * Incoming interrupt ID for line #0 line on DSP 61 * 62 * See {@link #DSP_INT} for possible values. 63 */ 64 config UInt dspRecvIntId0 = DSP_INT0; 65 66 /*! Vector ID to use on DSP for line #0 */ 67 config UInt dspIntVectId0 = 5; 68 69 /*! 70 * Incoming interrupt ID for line #0 line on ARM 71 * 72 * See {@link #ARM_INT} for possible values. 73 */ 74 config UInt armRecvIntId0 = ARM_INT0; 75 76 /*! Enable the second interrupt line */ 77 config Bool useSecondLine = false; 78 79 /*! 80 * Incoming interrupt ID for line #1 line on DSP 81 * 82 * See {@link #DSP_INT} for possible values. 83 */ 84 config UInt dspRecvIntId1 = DSP_INT1; 85 86 /*! Vector ID to use on DSP for line #1 */ 87 config UInt dspIntVectId1 = 6; 88 89 /*! 90 * Incoming interrupt ID for line #1 line on ARM 91 * 92 * See {@link #ARM_INT} for possible values. 93 */ 94 config UInt armRecvIntId1 = ARM_INT1; 95 96 internal: 97 98 }