1 /* 2 * Copyright (c) 2012-2013, Texas Instruments Incorporated 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * * Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * * Neither the name of Texas Instruments Incorporated nor the names of 17 * its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 /* 33 * ======== NotifyCircSetup.xdc ======== 34 */ 35 36 import ti.sdo.utils.MultiProc; 37 38 /*! 39 * ======== NotifyCircSetup ======== 40 * Manages setup of the default Notify driver handles 41 * 42 * Creates the default notify drivers for each pair of processors. 43 */ 44 module NotifyCircSetup inherits ti.sdo.ipc.interfaces.INotifySetup 45 { 46 /*! Possible incoming interrupt IDs for DSP */ 47 enum DSP_INT { 48 DSP_INT0 = 5, 49 DSP_INT1 = 67 50 } 51 52 /*! Possible incoming interrupt IDs for ARM */ 53 enum ARM_INT { 54 ARM_INT0 = 28, 55 ARM_INT1 = 29 56 } 57 58 /*! 59 * Incoming interrupt ID for line #0 line on DSP 60 * 61 * See {@link #DSP_INT} for possible values. 62 */ 63 config UInt dspRecvIntId0 = DSP_INT0; 64 65 /*! Vector ID to use on DSP for line #1 */ 66 config UInt dspIntVectId0 = 5; 67 68 /*! 69 * Incoming interrupt ID for line #0 line on ARM 70 * 71 * See {@link #ARM_INT} for possible values. 72 */ 73 config UInt armRecvIntId0 = ARM_INT0; 74 75 /*! Enable the second interrupt line */ 76 config Bool useSecondLine = false; 77 78 /*! 79 * Incoming interrupt ID for line #1 line on DSP 80 * 81 * See {@link #DSP_INT} for possible values. 82 */ 83 config UInt dspRecvIntId1 = DSP_INT1; 84 85 /*! Vector ID to use on DSP for line #1 */ 86 config UInt dspIntVectId1 = 6; 87 88 /*! 89 * Incoming interrupt ID for line #1 line on ARM 90 * 91 * See {@link #ARM_INT} for possible values. 92 */ 93 config UInt armRecvIntId1 = ARM_INT1; 94 95 internal: 96 97 }