These release notes contain valuable information which may not be included in other product documentation. This information will assist you in the use of Code Composer Studio™.
The release notes are divided into four sections:
CCSv7.1.0
uses an unmodified Eclipse Version 4.6 and CDT 9.0.
They are packaged together under “Eclipse IDE for C/C++ Developers” package
available from www.eclipse.org.
Additional plug-ins or 3rd party tools may be installed that are compatible
with Indigo release.
For additional information and support, please go to: https://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v7
Installation:
Please note that use of anti-virus software or a firewall may cause issues during installation.
McAfee software in particular has been especially troublesome.
If possible, disable anti-virus and firewall software during installation.
If not, use of the Offline Installer is strongly recommended.On Windows:
If you are using an Offline CCS Installer, the zip file in which it is
distributed must first be extracted:1. Right-click on CCS_7.x.x.xxxxx_win32.zip and select "Extract All...".
2. Enter the directory where you wish to extract the files.
3. Click on Extract.Once extraction has successfully completed, proceed with the installation steps below.
To install Code Composer Studio:1. Run ccs_setup_7.x.x.xxxxx.exe.
2. Choose where you want to install.
3. Select the components you wish to install.On OS X:
If you are using an Offline CCS Installer, the zip file in which it is
distributed must first be extracted:1. Right-click on CCS_7.x.x.xxxxx_osx.zip and select "Open”. This will extract the directory from the zip file..
Once extraction has successfully completed, proceed with the installation steps below.
To install Code Composer Studio:1. Run ccs_setup_7.x.x.xxxxx by clicking on the application in the Finder
2. Choose where you want to install.
3. Select the components you wish to install.On Linux:
Please visit https://processors.wiki.ti.com/index.php/Linux_Host_Support_CCSv7
before installing CCS on Linux. It contains important information on
installing CCS on different Linux distributions, including CCS dependencies that may need to be installed first.
Before installing CCS, the tarball file in which the CCS Installer is distributed must first be extracted:untar CCS_7.x.x.xxxxx_linux-x64.tar.gz or CCS_7.x.x.xxxxx_web_linux-x64.tar.gz and extract all files.
If installing from DVD, you also need to either mount the DVD with execute permissions first, or copy the files off the DVD to a local drive and change permissions there to run the installer.
Once extraction has successfully completed, proceed with the installation steps below.
Note: To facilitate the installation of emulation drivers, it is necessary to run part of the installation process as root.
You may if you wish install all of CCS as root. However, it is preferred that you first install CCS as a normal user and then install the drivers as root.
To install Code Composer Studio as a normal user and emulation drivers as root:1. Run ccs_setup_7.x.x.xxxxx.bin as a normal user.
2. Choose where you want to install.
3. Select the components you wish to install.
4. Navigate to directory <Install-Folder>/ccsv6/install_scripts.
5. As root, execute script "install_drivers.sh".To install all of Code Composer Studio as root:
1. Run ccs_setup_7.x.x.xxxxx.bin as root.
2. Choose where you want to install.
3. Select the components you wish to install.
· General Enhancements
· Bug fixes
· CCS 7.1.0 is 64bit native on Linux
· Resource Explorer 3.1.1
· Bug Fixes
ID |
Headline |
State |
Severity |
Found In |
Release |
Fixed In |
ReleaseNotes |
Workaround |
CCBT-2023 |
Loading example program results in data verification error(related to flash performance change) |
Fixed |
Major |
CCBT |
CCS 7.0.0 |
CCS 7.1.0 |
Loading the .out file generated by some example projects results
in data verification error. The same .out files load fine on CCS 6.2. |
|
CCDSK-2309 |
For new projects have the project location specified in the include search path |
Fixed |
Minor |
CCDSK |
CCS 6.2.0 |
CCS 7.1.0 |
Setup the project location as part of the compiler search path when creating a new project. |
|
CCDSK-2465 |
MSP430 differential download is causing a crash on debug launch |
Fixed |
Major |
CCDSK |
CCS 7.0.0 |
CCS 7.1.0 |
|
Disable differential download in the debug configuration. |
CCDSK-2471 |
The CCS installer is not displayed properly on 4K screens |
Fixed |
Major |
CCDSK |
CCS 7.0.0 |
CCS 7.1.0 |
|
See: https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/562132/2060731#2060731 |
CCSIDE-2934 |
Adding additional compiler flags using the "Edit flags" box does not work with MSP430 GNU Compiler |
Fixed |
Major |
CCSIDE |
CCS 6.1.3 |
CCS 7.1.0 |
Adding additional compiler flags using the GNU Compiler->Edit flags dialog box generates an error when working with MSP430 GNU Compiler. |
Add the options individually under GNU Compiler->Miscellaneous->Other flags. |
CCSIDE-2993 |
"No rule to make target" build errors on unresolved linked resource appear out of order in the build console |
Fixed |
Minor |
CCSIDE |
CCS 6.2.0 |
CCS 7.1.0 |
When a project contains an unresolved linked resource, the build generates "No rule to make target" errors. This error appears out of order in that it is displayed in the middle of the build output of another source file. |
|
CCSIDE-3026 |
Importing a RTSC library project into CCSv7 fails with "assertion failed" messages |
Fixed |
Major |
CCSIDE |
CCS 7.0.0 |
CCS 7.1.0 |
Importing a RTSC library project into CCSv7 fails with "assertion failed" messages. |
|
CCSIDE-3032 |
Existing executable (*.out) file gets deleted duing project import |
Fixed |
Major |
CCSIDE |
CCS 7.0.0 |
CCS 7.1.0 |
The existing executable (*.out)
file in the active configuration subfolder gets deleted during project import
when the project is not copied into the workspace. |
|
DBGTRC-3235 |
STM Trace is not working for 66AK2G02 (Galileo) devices |
Fixed |
Major |
DBGTRC |
CCS 6.2.0 |
EMU17_M02 |
When trying to enable any STM pin trace job, the execution fails
with a missing GEL routine. |
Use ETB instead. |
DBGTRC-3257 |
Interrupt Profiling view shows TM4C123 interrupts for a TM4C129 device |
Fixed |
Minor |
DBGTRC |
CCS 6.2.0 |
EMU17_M02 |
When tracing a TM4C129 using the Interrupt profiler trace job,
the displayed results show interrupts with names applicable only to TM4C123
device. |
N/A. |
DBGTRC-3305 |
ti_xds100_linux_install.sh (XDS100) install script for Linux has errors |
Fixed |
Major |
DBGTRC |
EMU16_M11 |
EMU17_M02 |
When installing CCS as user in Linux, the installer requests a
user to run the install_drivers.sh script as sudo at the end of the install. |
Run the udev restart command manually after running the install_scripts.sh |
DVT-1826 |
accessing the "Hardware Trace Analyzer" menu often locks up CCS for a few seconds |
Fixed |
Major |
DVT |
CCS 7.0.0 |
CCS 7.1.0 |
Accessing the "View -> Hardware Trace Analyzer" menu often locks up CCS for a few seconds. During this time, CCS is unresponsive and hangs. Usually this happens when a debug session is first launched and the menu item is accessed for the first time. Subsequent attempts are (usually) more responsive. |
|
REX-1124 |
Resource Explorer is displayed on 1/4 of the view in a 4K/high resolution display |
Fixed |
Major |
REX |
CCS 7.0.0 |
CCS 7.1.0 |
Resource Explorer is displayed on 1/4 of the view in a 4K/high resolution display. |
|
REX-932 |
In Linux, chromium browser should open PDF internally |
Fixed |
Major |
REX |
2.0.0, CCS 7.0.0 |
CCS 7.1.0 |
|
6.2 will use xulrunner as the browser engine by default on linux.
In order to get inplace viewing of pdf files to work, the following steps are
required : |
CCDSK-2188 |
Emulation driver install scripts failing to restart udev on CentOS 7 |
Open |
Major |
CCDSK |
CCS 6.2.0, CCS 7.0.0 |
CCS 7.1.0 |
The XDS100, MSP430, Blackhawk,
and Spectrum Digital Emulation driver install scripts all fail to restart
udev on CentOS 7 with the following error: |
Execute |
· General Enhancements
· Bug fixes
· CCS 7.0.0 is 64bit native on Linux as of CCS 6.2.0 and the 32bit native Linux version is no longer supported.
· Resource Explorer 2.1
· License Changes
· Bug Fixes
ID |
Headline |
State |
Severity |
Found In |
Release |
Fixed In |
ReleaseNotes |
CCDSK-2103 |
[Eclipse] Project import errors should be formatted to the size of the message box |
Declined |
Minor |
CCDSK |
CCS 6.2.0, CCS 6.1.3 |
CCS 7.0.0 |
Frequently when errors occur
during the process of importing projects into CCS, the error message is too
wide to fit in the error message box |
SDSCM00039329 |
Profiling help topic is missing screen captures |
Declined |
Minor |
DVT |
CCS 4.2.1 |
7.0.0 |
When you open the help for profiling it has some red X's where
the help references a screen capture but the screen capture is missing. |
CCBT-1969 |
SW breakpoints set in assembly source are set in two memory locations |
Fixed |
Major |
CCBT |
6.2.0 |
CCS 7.0.0 |
When setting SW breakpoints
from the Editor view in an assembly source file built with GCC, the debugger
inadvertently sets breakpoints at two non-contiguous locations. |
CCBT-1971 |
Debugger loses line debugging and stack frame with GCC assembly code |
Fixed |
Major |
CCBT |
6.2.0 |
CCS 7.0.0 |
When debugging an assembly file
built with GCC, the debugger is unable to perform line-by-line source code
correlation with assembly source files. It also loses the initial entry point
information. |
CCBT-1994 |
CCS gives "no source" error when stepping to an assembly source line after a label in the source file |
Fixed |
Minor |
CCBT |
CCS 6.2.0 |
CCS 7.0.0 |
CCS gives "no source" error when stepping to an assembly source line after a label in the assembly source file. When stepping again, then assembly source code is seen again. But the problem repeats with every label coming up with single stepping (or putting a breakpoint) in the same file. |
CCBT-1996 |
Incorrect links in DSS GettingStarted.htm file |
Fixed |
Minor |
CCBT |
CCS 6.2.0 |
CCS 7.0.0 |
The GettingStarted.htm file for
DSS has some invalid links. |
CCDSK-2051 |
In Linux, chromium browser should open PDF internally |
Fixed |
Major |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
|
CCDSK-2104 |
Project import wizard should not leave failed attempts in the workspace |
Fixed |
Major |
CCDSK |
CCS 6.2.0, CCS 6.1.3 |
CCS 7.0.0 |
Whenever the Project Import
wizard is used but a failure occurs, the project fragments are left in the
workspace. "Copy to workspace" must be enabled. |
CCDSK-2194 |
Help content for "Saving and Loading Memory Data Files" is out of date |
Fixed |
Minor |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
The dialogs for saving and loading have changed over the years and the screen captures in the help no longer match the actual product. |
CCDSK-2195 |
Help should mention that address values are not copied |
Fixed |
Minor |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
When you copy content from the
memory browser to the clipboard it only copies the values and not the
addresses or symbols, even if you have them selected and choose selected
cells. |
CCDSK-2202 |
kernel usb rules for msp430 are not installed |
Fixed |
Major |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
|
CCDSK-2246 |
GCC projects are passing invalid options to linker |
Fixed |
Major |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
The project builder of a
GCC-based project is passing the -mfpu, -mcpu and -march compiler options to
the linker phase, but this is confusing the automatic library selection
mechanism to properly index the GCC runtime libraries and causes the build to
fail. |
CCDSK-2349 |
Add option to include addresses when saving memory to clipboard |
Fixed |
Minor |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
The basic idea behind the request is to be able to save off memory but include the address info as well. Today when we save memory either via the save memory dialog or copying to clipboard we do not include the address |
CCSIDE-2878 |
Enabling parallel build on MacOS results in "fcntl(): Bad file descriptor" message |
Fixed |
Major |
CCSIDE |
CCS 6.1.3 |
CCS 7.0.0 |
When parallel build option is enabled, building projects on MacOS results in the message "fcntl(): Bad file descriptor" for each invocation of the compiler or linker. This does not interfere with the build process itself which should complete as expected. |
CCSIDE-2905 |
Head-less project import command should fail if specified workspace folder is in use |
Fixed |
Minor |
CCSIDE |
CCS 6.1.3 |
CCS 7.0.0 |
Head-less project import command should fail if specified workspace folder is in use. Currently it allows the import, causing workspace sync issues if the workspace is being used by a running instance of CCS. |
CCSIDE-2919 |
"null argument" error occurs when trying to link source files to TI_PDK_INSTALL_DIR variable |
Fixed |
Major |
CCSIDE |
CCS 6.1.3 |
CCS 7.0.0 |
TI_PDK_INSTALL_DIR is a build variable that is picked up from the AM335 PDK and used by RTSC projects. It will show up under the list of System Build Variables in the project properties. When linking source files to the project, that variable is in the drop down list of available variables to use for the link. But when it is actually selected for use, a "null argument" error occurs. |
CCSIDE-2922 |
NullPointerException error when switching between build configurations for a project with out file generated outside project |
Fixed |
Major |
CCSIDE |
CCS 6.1.3 |
CCS 7.0.0 |
|
CCSIDE-2931 |
CCS fails to open a workspace after a failed attempt at opening a large file in editor |
Fixed |
Minor |
CCSIDE |
6.1.3 |
CCS 7.0.0 |
|
CCSIDE-2937 |
[CDT] CCS generates "Invalid project path" warning for a new empty MSP430 project created for GNU compiler |
Fixed |
Major |
CCSIDE |
CCS 6.2.0 |
CCS 7.0.0 |
CCS generates "Invalid project path" warning for a new empty MSP430 project created for GNU compiler. |
CCSIDE-2938 |
.ccsproject gets modified with the <origin value> tag even for projects not copied into the workspace |
Fixed |
Major |
CCSIDE |
CCS 6.1.3 |
CCS 6.2.0, CCS 7.0.0 |
In some cases, the .ccsproject can get modified with the <origin value> tag even for projects not copied into the workspace. The <origin value> tag should only be applied for projects copied into the workspace. This can impact project checked into version control. |
CCSIDE-2947 |
Full build always triggered for BIOS5 projects that have a post build step |
Fixed |
Minor |
CCSIDE |
CCS 6.2.0 |
CCS 7.0.0 |
Having a post-build step with a BIOS5 project causes the *.tcf file to always be recompiled, breaking the incremental build. |
CCSIDE-2966 |
MMU page table DSS APIs are broken |
Fixed |
Major |
CCSIDE |
CCS 6.2.0 |
CCS 7.0.0 |
The ptvLookupAddress / ptvReverseLookup / ptvReverseLookupAll
cannot read the translated addresses on Cortex-A devices - they always
return: |
CCSIDE-2988 |
Changing compiler version from one GNU version to another changes the RTSC Target from gnu to ti |
Fixed |
Major |
CCSIDE |
CCS 6.2.0 |
CCS 7.0.0 |
If a SYS/BIOS project is set for a certain version of GNU compiler during import and the compiler version is then changed to another GNU compiler, then the RTSC Target incorrectly changes from gnu.targets.arm.A15F to ti.targets.arm.elf.A8Fnv, causing the build to break. |
CCSIDE-2992 |
The project wizard for C66x (Keystone I) platforms shows an ARM core |
Fixed |
Major |
CCSIDE |
6.2.0 |
CCS 7.0.0 |
When using the Project Wizard to create a new project for the C6678 device family, a Cortex A core tab shows up as an option to create a new project. |
SDSCM00046429 |
Code composer crashes after reset/restart |
Fixed |
Major |
Simulation - Arctic |
0.7.0.0 |
0.7.0.0 |
|
SDSCM00052390 |
Estimated RAM usage printed in the console is not accurate |
Fixed |
Major |
CCBT |
6.1.3, 6.1.1, CCS 6.2.0 |
CCS 7.0.0 |
The RAM usage estimate displaye din the output console is higher than the actual usage. |
CCDSK-2188 |
Emulation driver install scripts failing to restart udev on CentOS 7 |
Open |
Major |
CCDSK |
CCS 6.2.0 |
CCS 7.0.0 |
The XDS100, MSP430, Blackhawk,
and Spectrum Digital Emulation driver install scripts all fail to restart
udev on CentOS 7 with the following error: |
SDSCM00046280 |
Image Analyzer does not process 8bit data read in big endian for RGB correctly |
Open |
Major |
DVT |
CCS 5.3.0 |
7.0.0 |
Ther is a problem with viewing
RGB data with 8bit Data Read. See forum post for details. |
SDSCM00047055 |
Support for debugging RealView Compiler output including Semi-hosting |
Open |
Major |
Code Composer Studio |
5.4.0 |
7.0.0 |
Would like to be able to use CIO functions like printf when debugging code generated by the RealView compiler in CCS. |
SDSCM00050087 |
Ability to show user events in Execution Graph |
Open |
Major |
DVT |
CCS 6.0.0 |
7.0.0 |
|
SDSCM00051495 |
Graph Q_Value parameter should allow values larger than 30 |
Open |
Major |
DVT |
CCS 6.1.0 |
7.0.0 |
|
SDSCM00051840 |
Provide a large icon set on Eclipse for a better experience with High Definition monitors |
Open |
Minor |
Code Composer Studio |
6.1.0 |
7.0.0 |
Historically
Eclipse always have fixed size icons on all its elements. |
SDSCM00051932 |
Remove MMU Page Table view from CCS |
Open |
Major |
Code Composer Studio |
6.1.0 |
7.0.0 |
|
SDSCM00052612 |
Add ability to delete generated assembly listing files as part of "clean" operation |
Open |
Minor |
Code Composer Studio |
6.1.1 |
7.0.0 |
Request to delete assembly listing files as part of a project clean operation |
· General Enhancements
· Bug fixes
· CCS 6.2.0 is 64bit native on Linux. The 32bit native Linux is no longer supported as of this release.
· Resource Explorer 2.0 (Beta)
· Bug Fixes
Dbid |
Id |
Component |
Headline |
DVT-1170 |
SDSCM00050088 |
Code Composer Studio |
Show semaphore names in Execution Graph |
DBGTRC-3071 |
SDSCM00051862 |
Code Composer Studio |
Command-line programming via UniFlash causes java exception on Linux |
DBGTRC-2242 |
SDSCM00051311 |
Code Composer Studio |
Blackhawk XDS200 debuggers do not install firmware update utilities |
DBGTRC-2272 |
SDSCM00051827 |
Code Composer Studio |
GTI error issued when loading code |
DBGTRC-2379 |
SDSCM00052658 |
Code Composer Studio |
Improve the text of the message that comes up when waking device from lower power mode to clarify what each action does |
DBGTRC-2378 |
SDSCM00052657 |
Code Composer Studio |
CCS shuts down when user clicks on "Yes" in pop-up message that tries to wake up device from low power mode |
DBGTRC-2268 |
SDSCM00051819 |
Code Composer Studio |
XDS GDB Agent should have a configurable base port number |
CCSIDE-1605 |
SDSCM00043955 |
Code Composer Studio |
Errors show up in problems view even after rebuilding with no errors |
CCSIDE-1037 |
SDSCM00040045 |
Code Composer Studio |
NullPointerException when renaming project |
CCSIDE-2237 |
SDSCM00049856 |
Code Composer Studio |
CCSv6 experiences high CPU usage when chromium based tool is opened |
CCSIDE-2305 |
SDSCM00050293 |
Code Composer Studio |
Spell-checker in the editor does not work |
CCSIDE-2487 |
SDSCM00051622 |
Code Composer Studio |
Copy & paste of a project in the Project Explorer does not copy the Debug settings |
CCSIDE-2406 |
SDSCM00051082 |
Code Composer Studio |
Remember that clock was visible from previous debug session and show it again |
CCSIDE-2418 |
SDSCM00051157 |
Code Composer Studio |
Debug view toolbar (Resume, suspend, Terminate, etc.) disappears under certain circumstances |
CCSIDE-2579 |
SDSCM00052362 |
Code Composer Studio |
Breakpoints set from the editor and Breakpoints view are not displayed in the Disassembly view |
CCSIDE-2643 |
SDSCM00052763 |
Code Composer Studio |
Project incorrectly fails to build when option -mfpu=vfpv3-d16 is used |
CCSIDE-2555 |
SDSCM00052129 |
Code Composer Studio |
Breakpoints view does not display current current count if a skip count is set |
CCSIDE-2404 |
SDSCM00051072 |
Code Composer Studio |
Launching a debug session when a previous one is still active leaves its header lingering in the Debug view |
CCDSK-1942 |
SDSCM00052435 |
Code Composer Studio |
Request to add a notification in CCS installer to inform users about which Launchpads are not supported |
CCDSK-1938 |
SDSCM00052349 |
Code Composer Studio |
Update to antivirus warning dialog |
CCDSK-1923 |
SDSCM00052007 |
Code Composer Studio |
Default installation directory to be C:\ti\ccs_<version> |
CCDSK-1720 |
SDSCM00049478 |
Code Composer Studio |
CCSv6 should be integrated in Ubuntus Dash menu |
CCDSK-2042 |
SDSCM00051587 |
Code Composer Studio |
Updates that apply only for CCSv6 appear as updates for CCSv5 |
CCDSK-469 |
|
Code Composer Studio |
[Eclipse] Infinite loop when copying or renaming a project |
CCDSK-2027 |
|
Code Composer Studio |
Projects created with older compilers on newer CCS cannot be imported by another user |
CCDSK-1924 |
SDSCM00052008 |
Code Composer Studio |
Integrate CCS Install with App Center |
CCDSK-1900 |
SDSCM00051593 |
Code Composer Studio |
The install_logs subdirectories should be placed in a single subdirectory under ccsv6 |
CCBT-1745 |
SDSCM00051813 |
Code Composer Studio |
CCS Mac: should not parse .DS_Store files |
CCBT-1929 |
SDSCM00052132 |
Code Composer Studio |
Launching a debug server session with two F28069 devices fails with error 1006: Unable to allocate memory |
CCBT-1794 |
SDSCM00052217 |
Code Composer Studio |
When loading a .hex file, CCS and Uniflash incorrectly report loading zero bytes to target |
CCBT-1826 |
SDSCM00052511 |
Code Composer Studio |
CCS crashes when loading a program with "Align program segments to 64-bit memory regions" flash option is enabled |
CCBT-1825 |
SDSCM00052509 |
Code Composer Studio |
Invalid resets can cause a DS crash |
CCBT-1819 |
SDSCM00052457 |
Code Composer Studio |
Register view prevents changes to registers on C2000 devices |
CCBT-1817 |
SDSCM00052425 |
Code Composer Studio |
Linux version of gti_uart_driver.xml contains reference to Windows driver file (JavaToGtiAdapter.dvr) instead of Linux |
CCBT-1815 |
SDSCM00052413 |
Code Composer Studio |
Hercules Flash - Problem with loading programs with non-64bit aligned segments |
CCBT-1823 |
SDSCM00052496 |
Code Composer Studio |
XDS510 JTAG debuggers fail to finish flashing CortexM devices |
CCBT-1764 |
SDSCM00051971 |
Code Composer Studio |
CCS launched with wrong product id when launched via DSS |
CCBT-1785 |
SDSCM00052150 |
Code Composer Studio |
Need DSS memory read APIs that natively return a floating point value |
CCBT-1790 |
SDSCM00052197 |
Code Composer Studio |
Under certain circumstances, GEL does not properly work with the ternary "?" operator |
CCBT-1834 |
SDSCM00052535 |
Code Composer Studio |
Typo in error message |
CCBT-1801 |
SDSCM00052283 |
Code Composer Studio |
The values of packed structure members are not displayed correctly in Expressions view |
CCBT-1781 |
SDSCM00052110 |
Code Composer Studio |
Debug info about GCC C++ namespaces are not processed correctly |
· General Enhancements
· Enhancements to IDE:
o Integration with Eclipse v4.5.1 and CDT 8.7
· Added support for OS X for MCU devices.
· Support for GCC for MSP430
·
Improved Cortex A15 SM debug support
· MSP EnergyTrace
o Improved EnergyTrace tool for profiling application’s energy consumption, battery lifetime, monitoring internal device states and determining execution hotspots (statistical function profile)
· Bug Fixes
dbid |
Id |
Component |
Headline |
33607210 |
SDSCM00052778 |
Code Composer Studio |
Compiler discovery msp gcc use xml file for buildid |
33607191 |
SDSCM00052759 |
Code Composer Studio |
Project wizard for PRU cores does not automatically pull a linker CMD file |
33607181 |
SDSCM00052749 |
Code Composer Studio |
CCS does not recognize Linaro GCC toolchain GNU v5.2.1 |
33607147 |
SDSCM00052715 |
Code Composer Studio |
Energia sketch imported into CCS generates build error "Un-terminated string literal detected during code-generation!" |
33607054 |
SDSCM00052622 |
Code Composer Studio |
CCS hex utility for C55x does not allow user to pass values correctly to reg_config option |
33607052 |
SDSCM00052620 |
Code Composer Studio |
Compiler discovery does not distinguish between gcc_msp430_4.9.14r1_167 and gcc_msp430_4.9.14r1_364 |
33607045 |
SDSCM00052613 |
Code Composer Studio |
CCS throws Java.lang.NULL error when importing a project via projectspec for an unsupported device |
33607042 |
SDSCM00052610 |
Code Composer Studio |
Command line ProjectCreate sometimes fails when the batch file also contains other commands |
33607021 |
SDSCM00052589 |
Code Composer Studio |
When the device variant is changed for a project, any prebuild and postbuild steps that were set for the project disappear |
33606994 |
SDSCM00052562 |
Code Composer Studio |
Cannot enable 'View' menu in custom Perspective |
33606993 |
SDSCM00052561 |
Code Composer Studio |
Editor greys out wrong conditional code on Ubuntu |
33606928 |
SDSCM00052496 |
Code Composer Studio |
XDS510 JTAG debuggers fail to finish flashing CortexM devices |
33606928 |
SDSCM00052496 |
Code Composer Studio |
XDS510 JTAG debuggers fail to finish flashing CortexM devices |
33606911 |
SDSCM00052479 |
Code Composer Studio |
Updated editor file associations to recognize .sv7A as an assembly file |
33606908 |
SDSCM00052476 |
Code Composer Studio |
Setting up breakpoints from the Editor view of a non-CCS project causes several views to be disconnected from the target |
33606907 |
SDSCM00052475 |
Code Composer Studio |
Disassembly view shows a disabled breakpoint if it is set to the source code line instead of an opcode |
33606906 |
SDSCM00052474 |
Code Composer Studio |
Cannot set breakpoints from the Editor view on a Cross GCC project |
33606901 |
SDSCM00052469 |
Code Composer Studio |
GCC Linker option for passing options file should be "@file" instead of the "-@file" that is currently generated |
33606894 |
SDSCM00052462 |
Code Composer Studio |
Explicitly name auto-generated make dependency files to something.d, to avoid user confusion with .pp files |
33606889 |
SDSCM00052457 |
Code Composer Studio |
Register view prevents changes to registers on C2000 devices |
33606873 |
SDSCM00052441 |
Code Composer Studio |
Help for GEL_EvalOnTarget needs to mention what the return value is |
33606872 |
SDSCM00052440 |
Code Composer Studio |
GEL_Connect() is not documented in the CCS Help |
33606871 |
SDSCM00052439 |
Code Composer Studio |
GEL_Disconnect not listed in help |
33606867 |
SDSCM00052435 |
Code Composer Studio |
Request to add a notification in CCS installer to inform users about which Launchpads are not supported |
33606857 |
SDSCM00052425 |
Code Composer Studio |
Linux version of gti_uart_driver.xml contains reference to Windows driver file (JavaToGtiAdapter.dvr) instead of Linux |
33606847 |
SDSCM00052415 |
Code Composer Studio |
Adding Eclipse Static library project as dependency to a CCS project causes the libraries to be moved under -T option |
33606845 |
SDSCM00052413 |
Code Composer Studio |
Hercules Flash - Problem with loading programs with non-64bit aligned segments |
33606839 |
SDSCM00052407 |
Code Composer Studio |
Error parser does not detect compiler error on the last source line |
33606826 |
SDSCM00052394 |
Code Composer Studio |
[CDT] Renaming a file or project results in the message "The participant 'Header File Rename' caused an internal error |
33606795 |
SDSCM00052363 |
Code Composer Studio |
Memory Allocation View does not display bargraphs in Ubuntu |
33606792 |
SDSCM00052360 |
Code Composer Studio |
Build fails with program mode compilation enabled as generated makefile passes incorrect object files to linker |
33606781 |
SDSCM00052349 |
Code Composer Studio |
Update to antivirus warning dialog |
33606772 |
SDSCM00052340 |
Code Composer Studio |
Browse examples button on Getting Started Page hides MSPWare examples |
33606715 |
SDSCM00052283 |
Code Composer Studio |
The values of packed structure members are not displayed correctly in Expressions view |
33606709 |
SDSCM00052277 |
Code Composer Studio |
The DGrid widget disappears when any text is added to the Widget Column Names field |
33606631 |
SDSCM00052199 |
Code Composer Studio |
Importing legacy CCSv3 project fails via command-line import |
33606630 |
SDSCM00052198 |
Code Composer Studio |
Enable Sync Group cores should somehow warn the user this is only applicable to SMP or be overall disabled |
33606629 |
SDSCM00052197 |
Code Composer Studio |
Under certain circumstances, GEL does not properly work with the ternary "?" operator |
33606628 |
SDSCM00052196 |
Code Composer Studio |
When grouped together, problems and Console view tabs flicker during a project build |
33606626 |
SDSCM00052194 |
Code Composer Studio |
Unable to read 40 bit addresses |
33606582 |
SDSCM00052150 |
Code Composer Studio |
Need DSS memory read APIs that natively return a floating point value |
33606553 |
SDSCM00052121 |
Code Composer Studio |
Preserve search paths and predefines when changing from TI to GCC |
33606513 |
SDSCM00052081 |
Code Composer Studio |
[CDT] BIOS CFG file is not passed to xdctools when building project on Windows with Turkish language settings |
33606488 |
SDSCM00052056 |
Code Composer Studio |
Problems warning for compilers should not redirect user to the CCS App Center |
33606449 |
SDSCM00052017 |
Code Composer Studio |
[CDT] Under certain circumstances, dependent projects are built even when they are up-to-date |
33606448 |
SDSCM00052016 |
Code Composer Studio |
Changing GCC compiler version resets any file-specific build options |
33606448 |
SDSCM00052016 |
Code Composer Studio |
Changing GCC compiler version resets any file-specific build options |
33606448 |
SDSCM00052016 |
Code Composer Studio |
Changing GCC compiler version resets any file-specific build options |
33606443 |
SDSCM00052011 |
Code Composer Studio |
Make it possible to exclude built in RTSC discovery paths |
33606442 |
SDSCM00052010 |
Code Composer Studio |
enable parallel builds by default |
33606439 |
SDSCM00052007 |
Code Composer Studio |
Default installation directory to be C:\ti\ccs_<version> |
33606435 |
SDSCM00052003 |
Code Composer Studio |
Changing compiler version resets any modifications made to the Command-line pattern |
33606403 |
SDSCM00051971 |
Code Composer Studio |
CCS launched with wrong product id when launched via DSS |
33606230 |
SDSCM00051798 |
Code Composer Studio |
Making changes to a header file does not trigger rebuild of the source file that includes that header file |
33606219 |
SDSCM00051787 |
Code Composer Studio |
Request to be able to add file specific options using "Set Additional Flags" button |
33606161 |
SDSCM00051729 |
Code Composer Studio |
If Problems view is minimized and focus is on a source file in the editor, then errors/warnings disappear from Restored view |
33606158 |
SDSCM00051726 |
Code Composer Studio |
Switching to CCS Debug perspective and back to CCS Edit makes Editor Navigate buttons disappear |
33606146 |
SDSCM00051714 |
Code Composer Studio |
Memory View does not refresh and show content after relaunching a debug session |
33606072 |
SDSCM00051640 |
Code Composer Studio |
Request to be able to import archive of projectspecs |
33606071 |
SDSCM00051639 |
Code Composer Studio |
After importing a projectspec with path variable defined, the Location of linked resource shows weird characters |
33606027 |
SDSCM00051595 |
Code Composer Studio |
Disassembly style option in the debugger shows Cortex M3 when debugging Cortex M4 devices |
33605977 |
SDSCM00051545 |
Code Composer Studio |
'New CCS Project' dialog content is truncated (with no scroll bar) if the vertical resolution is too small |
33605973 |
SDSCM00051541 |
Code Composer Studio |
Allow support for batch operations on all build configurations of a project |
33605971 |
SDSCM00051539 |
Code Composer Studio |
Setting a CDT breakpoint in a CCS debug session can cause various views to stop updating |
33605962 |
SDSCM00051530 |
Code Composer Studio |
Add build button and Build Project menu to Debug Perspective, Remove Build All menu |
33605594 |
SDSCM00051162 |
Code Composer Studio |
GC: Tab widget not sending selectedTabIndex binding to target variable |
33605534 |
SDSCM00051102 |
Code Composer Studio |
tiobj2bin folder within \ccsv6\utils should be installed irrespective of which processors are selected for custom install |
33605265 |
SDSCM00050833 |
Code Composer Studio |
Callstack line numbers are off by 1 when using imported Energia project |
33604942 |
SDSCM00050510 |
Code Composer Studio |
Hide the 'RemoteSystemsTempFile' project as an option when browsing projects in the workspace |
33604661 |
SDSCM00050229 |
Code Composer Studio |
The ability to set file specific linker options should not be exposed |
33604633 |
SDSCM00050201 |
Code Composer Studio |
[CDT] Removing file should remove all associated settings |
33604378 |
SDSCM00049946 |
Code Composer Studio |
EVE CCS/Load Program/Browse Project not working |
33604378 |
SDSCM00049946 |
Code Composer Studio |
EVE CCS/Load Program/Browse Project not working |
33604378 |
SDSCM00049946 |
Code Composer Studio |
EVE CCS/Load Program/Browse Project not working |
33604218 |
SDSCM00049786 |
Code Composer Studio |
GC: support bi-directional char array binding |
33604021 |
SDSCM00049589 |
Code Composer Studio |
variables decalred in annoymous namspace cannot be accessed (GCC compiler ) |
33603910 |
SDSCM00049478 |
Code Composer Studio |
CCSv6 should be integrated in Ubuntu's Dash menu |
33602012 |
SDSCM00047580 |
Code Composer Studio |
Linking MSP FETS and sessions |
33593104 |
SDSCM00038672 |
DVT |
CCSv4.2 RC1 profiler doesn’t correctly report the type of cycles, cycle.CPU versus cycle.Total |
· General Enhancements
· Bug fixes
· Bug Fixes
dbid |
Id |
Component |
Headline |
SDSCM00052501 |
Code Composer Studio |
OFS inadvertently loads the whole debug info section when printing out a log msg. |
|
33606897 |
SDSCM00052465 |
Code Composer Studio |
java.lang.NullPointerExecptionError when opening the Memory View |
33606735 |
SDSCM00052303 |
Code Composer Studio |
CCS is unable to build ARM projects for 66AK2* devices set to use the GNU compiler |
33606413 |
SDSCM00051981 |
Code Composer Studio |
Energia location is not recognized on CCS for Mac |
33606933 |
SDSCM00052501 |
Code Composer Studio |
OFS inadvertently loads the whole debug info section when printing out a log msg. |
33606897 |
SDSCM00052465 |
Code Composer Studio |
java.lang.NullPointerExecptionError when opening the Memory View |
33606735 |
SDSCM00052303 |
Code Composer Studio |
CCS is unable to build ARM projects for 66AK2* devices set to use the GNU compiler |
· General Enhancements
·
Added support for SimpleLink™ CC26xx and CC13xx MCU platform of
devices.
·
Added support for automatic firmware update for XDS110
· Added OS X platform support for CCS for MCU devices (Beta)
· MSP EnergyTrace
o Improved EnergyTrace tool for profiling application’s energy consumption, battery lifetime, monitoring internal device states and determining execution hotspots (statistical function profile)
· Bug Fixes
dbid |
Id |
Component |
Headline |
33606192 |
SDSCM00051760 |
C2000 Code Generation Tools |
Compiler error for missing brace "}" at end of source is not reported in Problems view |
33594903 |
SDSCM00040471 |
DVT |
Show profile data in call graph |
33606099 |
SDSCM00051667 |
DVT |
Graph export/import should save/restore autoscale and y-axis range settings. |
33606155 |
SDSCM00051723 |
DVT |
symbol names not show for EnergyTrace on MSP430 |
33606293 |
SDSCM00051861 |
DVT |
Improve EnergyTrace UI for power graph to clearly show whether measurements are relative or absolute |
33602008 |
SDSCM00047576 |
IDE |
Unable to generate code coverage data via DSS |
33602046 |
SDSCM00047614 |
IDE |
Scripting Console: Button to open/load a javascript file |
33602176 |
SDSCM00047744 |
IDE |
legacy format header files not handled correctly |
33602266 |
SDSCM00047834 |
IDE |
DS initiated progress dialog should consider the dialog option "Always Run on Background" |
33602278 |
SDSCM00047846 |
IDE |
Once I start a CCS debug session, build all will popup a modal progress box |
33602500 |
SDSCM00048068 |
IDE |
[C28 Flash] Flash programming does not work with "Auto Run on Reset" option on |
33602584 |
SDSCM00048152 |
IDE |
Importing a SYS/BIOS project created with older version of CCS causes migration errors |
33602609 |
SDSCM00048177 |
IDE |
Scan compiler options files to improve conditional formatting |
33602657 |
SDSCM00048225 |
IDE |
Flash programming sometimes results in error "Timed out while writing to Flash memory" |
33602680 |
SDSCM00048248 |
IDE |
Breakpoint on a single source line causes the debugger to break twice before resuming execution |
33602690 |
SDSCM00048258 |
IDE |
Importing a CCS3.3 library project with project dependencies results in java.lang.NullPointerException |
33602697 |
SDSCM00048265 |
IDE |
In the compiler selection drop-down the listing for gcc should include the executable name |
33602741 |
SDSCM00048309 |
IDE |
Missing .ebss and .reset directive highlights for C2000 cmd file |
33602776 |
SDSCM00048344 |
IDE |
Class members are not shown in Variables view for code built with GCC |
33602789 |
SDSCM00048357 |
IDE |
MSP430 Trace View does not refresh properly when decoding instructions |
33602816 |
SDSCM00048384 |
IDE |
Project import tool sometimes does not resolve paths correctly |
33602820 |
SDSCM00048388 |
IDE |
Provide more precise error messages in Import CCS Project wizard |
33602840 |
SDSCM00048408 |
IDE |
Switching between two projects can sometime get GUI Composer out of sync |
33602849 |
SDSCM00048417 |
IDE |
The compiler option -v that specifies the silicon version is retained when switching device variants |
33602878 |
SDSCM00048446 |
IDE |
Flashing fails on Stellaris TM4C129X devices |
33602894 |
SDSCM00048462 |
IDE |
Makefile validation errors prevent makefile re-generation |
33602900 |
SDSCM00048468 |
IDE |
The Location of local variables is sometimes displayed incorrectly for GCC ELF files |
33602985 |
SDSCM00048553 |
IDE |
Include paths using "workspace_loc: variable are not passed to the compiler if the path does not exist |
33603000 |
SDSCM00048568 |
IDE |
Request to have LCD option for meter widget |
33603001 |
SDSCM00048569 |
IDE |
Request to have an out of range indicator option for gauges and meters |
33603044 |
SDSCM00048612 |
IDE |
CCS fails to program certain .out files when "Auto ECC generation" is enabled in Flash Settings |
33603191 |
SDSCM00048759 |
IDE |
Deadlock due to "buddy" classloading |
33603338 |
SDSCM00048906 |
IDE |
Invoking gmake with -s option causes the Problems view to not update after errors have been corrected |
33603350 |
SDSCM00048918 |
IDE |
Would like a method to disable Optimization Advice |
33603434 |
SDSCM00049002 |
IDE |
App center in installer shows MSP430 content even when MSP not selected |
33603485 |
SDSCM00049053 |
IDE |
Request fpr Memory Allocation view to show UNION sections |
33605396 |
SDSCM00050964 |
IDE |
Hex Utility (and GNU Objcopy in the case of GNU tools) should run before post build steps in CCS |
33605484 |
SDSCM00051052 |
IDE |
When using SW breakpoints in source file, the LDR instruction does not work correctly on a Cortex-A8 (AM335x) |
33605678 |
SDSCM00051246 |
IDE |
User is prompted to terminate existing debug session when running a multi-session DSS script from the Console |
33605704 |
SDSCM00051272 |
IDE |
The CCS Online Help content for "Data File Formats" is outdated |
33605866 |
SDSCM00051434 |
IDE |
Multiple copies of the same header file are opened when clicking on a error/warning in the Problems view |
33605961 |
SDSCM00051529 |
IDE |
Debugserver should release files that are opened in the target application when a debug session is terminated |
33606052 |
SDSCM00051620 |
IDE |
TI-RTOS template project fails to build with GNU build tools |
33606056 |
SDSCM00051624 |
IDE |
DefaultToolChain property on Device XML files is not being properly acknowledged by the Project wizard |
33606059 |
SDSCM00051627 |
IDE |
Passing XDCROOT as a parameter to batch file in post build step does not work as expected |
33606063 |
SDSCM00051631 |
IDE |
CCS crash in a gcc compiled C++ program when expanding a class pointer |
33606075 |
SDSCM00051643 |
IDE |
Tiva E device support does not get installed |
33606136 |
SDSCM00051704 |
IDE |
90 day eval license activation is broken |
33606202 |
SDSCM00051770 |
IDE |
Closing and restarting CCS when in CCS Simple mode causes debugger to no longer work (all debug functions are grayed out) |
33606220 |
SDSCM00051788 |
IDE |
Update Linux dependency checker to include Chrome libraries |
33606238 |
SDSCM00051806 |
IDE |
Some variables do not display correct values when debugging DWARF3+ output |
33606285 |
SDSCM00051853 |
IDE |
When exporting GUI Composer project there is no UART Connection option for F28069 device |
33606288 |
SDSCM00051856 |
IDE |
Memory Fill silently fails if Length is preceded with '0x' |
33606303 |
SDSCM00051871 |
IDE |
AppCenter failed to install app due to isWare exception |
33606304 |
SDSCM00051872 |
IDE |
AppCenter failed to install app due to feature not found |
33606311 |
SDSCM00051879 |
IDE |
The function Import from the Target Configurations view has a typo |
33606331 |
SDSCM00051899 |
IDE |
Variables allocated to address 0x0 do not appear correctly in Expressions view |
33606357 |
SDSCM00051925 |
IDE |
Unable to create Energia sketches for MSP432 |
33606367 |
SDSCM00051935 |
IDE |
disassembly view does not always refresh correctly. |
33606367 |
SDSCM00051935 |
IDE |
disassembly view does not always refresh correctly. |
33606372 |
SDSCM00051940 |
IDE |
Unable to use $(GEL_file_dir) with GEL_AddInputFile |
33606377 |
SDSCM00051945 |
IDE |
Variables view is pointing to incorrect values in stack in Cortex A9 |
33606496 |
SDSCM00052064 |
IDE |
Executable built by custom GCC version with crash CCS when symbols are loaded |
33601294 |
SDSCM00046862 |
Simulation |
66AK2H12 simulator : Source line Step over on function calls is not working for CortexA15 cores |
33599709 |
SDSCM00045277 |
Trace |
ETB is not working on DM365 and DM368 |
33600578 |
SDSCM00046146 |
Trace |
Setting a trace end job completely disables the Trace generation |
33603026 |
SDSCM00048594 |
Trace |
DM814x Trace shows a Device ID mismatch in Linux |
33603028 |
SDSCM00048596 |
Trace |
DM816x core Trace shows nothing at the Trace Analyzer view in Linux |
33603029 |
SDSCM00048597 |
Trace |
OMAP4 and OMAPL138 Trace fails to properly initialize in CCS for Linux |
33603029 |
SDSCM00048597 |
Trace |
OMAP4 and OMAPL138 Trace fails to properly initialize in CCS for Linux |
33606067 |
SDSCM00051635 |
Trace |
STM pin trace fails to initialize on Centaurus (DM8148) boards |
33606106 |
SDSCM00051674 |
Trace |
Trace viewer locks up CCSv6.1 when displaying data from Cortex A core |
· General Enhancements
· Enhancements to IDE:
·
Integration with Eclipse v4.4.1
·
Added support for SimpleLink™ CC26xx and CC13xx MCU platform of
devices.
·
Added support for on-board USB XDS110 debug (Hercules RM46x LaunchPad).
·
Support for GCC for MSP430.
· MSP EnergyTrace
o Improved EnergyTrace tool for profiling application’s energy consumption, battery lifetime, monitoring internal device states and determining execution hotspots (statistical function profile)
· Bug Fixes
Id
Component
Headline
SDSCM00051190
CCS App Center
Update "CDT GNU Support" package to include GDB h/w debug feature
SDSCM00050028
DVT
Code coverage trace job freezes CCS
SDSCM00050080
DVT
Support dynamic TSK/HWI/SWI name in System Analyzer
SDSCM00050599
DVT
ProTrace/FunctionExecutionGraph fails to visualize >512 functions
SDSCM00051019
DVT
Add CSV format to the exported EnergyTrace data
SDSCM00051019
DVT
Add CSV format to the exported EnergyTrace data
SDSCM00051073
DVT
EnergyTrace configurations view fails to show if the workspace is brand new or "cleaned"
SDSCM00051169
DVT
Code Coverage source code coloring is not working well
SDSCM00049303
Emulation
C6671 device file specifies 2 C66x cores when it should be one
SDSCM00050110
Emulation
Imported TivaWare project missing links files on CCS Linux
SDSCM00050124
Emulation
Unable to step over an ARM embedded BKPT instruction if it is BKPT 123, works if it is BKPT #123
SDSCM00050343
Emulation
Change Project wizard's default binary format for C674x families from COFF to ELF
SDSCM00050412
Emulation
Some PRU0 registers are mapped to PRU1 registers on AM437x devices
SDSCM00050413
Emulation
The debug register for PRU0 core of the ICSS1 has a typo
SDSCM00050421
Emulation
Support CC3200 with XDS100/200/560v2
SDSCM00050444
Emulation
When two XDS100 emulators are connected to a USB3.0 Hub, only one emulator is able to be connected to CCS
SDSCM00050586
Emulation
CCS for Linux collapses when trying to connect to more than seven cores on a Keystone 2 EVM
SDSCM00051029
Emulation
dbgjtag can communicate with xds200 but debug launch fails with unable to communicate message
SDSCM00051033
Emulation
The word "Emulator" is still present in several emupack messages
SDSCM00051077
Emulation
C6455 and TCI6482 PLLC2 register bank is broken
SDSCM00051077
Emulation
C6455 and TCI6482 PLLC2 register bank is broken
SDSCM00051182
Emulation
Cycle counts are not available for profile clock on C64x targets
SDSCM00042270
IDE
Linker - Cmd mapping should be introduced when a user changes defaults for RTSC projects.
SDSCM00042650
IDE
[TISB] Project Manager should add the RTSC Platform file to the Project Explorer view
SDSCM00044613
IDE
XDC Content Assist is triggering a lot exceptions in customer workspace logs
SDSCM00046255
IDE
JLink: loading and running program in a debug session on LM3S9D92 behaves oddly
SDSCM00047366
IDE
Improve usability for setting linked resource path variables and build variables
SDSCM00047368
IDE
Ability to import/export project and workspace level variables (to/from a file)
SDSCM00047370
IDE
Add support for easily leveraging build variables when setting build properties
SDSCM00047827
IDE
Would like ability to rename memory view "tabs" to user specified name
SDSCM00047828
IDE
Enhancement to use last specified data format for new views.
SDSCM00048029
IDE
CCS flash programmer fails with message "Timed out while writing to Flash memory"
SDSCM00048546
IDE
variables decalred in annoymous namspace cannot be accessed
SDSCM00049004
IDE
MSP430 GTI driver is getting installed even when MSP is not installed
SDSCM00049095
IDE
The wrench/push-pin icon that denotes a file with file specific options does not appear when expected
SDSCM00049211
IDE
Need erase flash option for MSP430
SDSCM00049404
IDE
msp430 emulation logic not restored on a hard reset
SDSCM00049534
IDE
Windows ERRORLEVEL code is not set for headless project import error
SDSCM00049537
IDE
Installation dialog shows "Not Responding"
SDSCM00049538
IDE
Digital Gauge rapaint issue when threshold value is small
SDSCM00049540
IDE
CCS GUI does not allow for compiler option --interrupt_threshold with threshold value omitted
SDSCM00049562
IDE
Renaming widget ID causes existing binding to disappear.
SDSCM00049613
IDE
case sensitive mismatch when importing v3 projects to v5
SDSCM00049687
IDE
CCS not creating proper INTEL-HEX for msp430
SDSCM00049742
IDE
Pop up a warning dialog when 1 day is left on eval license
SDSCM00049763
IDE
headless project import: Add option to auto-import dependant projects
SDSCM00049804
IDE
CCS fails in the presence of VMWare shared folders
SDSCM00049845
IDE
App Center search should search the title as well
SDSCM00049910
IDE
Adding a source look up from Debug View context menu does not works
SDSCM00049947
IDE
New CCS EVE project does not run out of the box
SDSCM00049947
IDE
New CCS EVE project does not run out of the box
SDSCM00049988
IDE
Switching compiler tools from Red Hat GNU to TI does not set linker command file properly
SDSCM00050100
IDE
The Pending Installation Dialog for the App Center has the wrong menu item listed
SDSCM00050101
IDE
Indexer settings not maintained
SDSCM00050102
IDE
Changing part should trigger reindexing
SDSCM00050108
IDE
If a GUI Composer app already contains appInitDS.js file, then it should be used during export
SDSCM00050132
IDE
Dependency Checker having issues with libusb on CentOS 6.5
SDSCM00050137
IDE
A basic new project for Tiva does not run to main when built with Linaro GCC
SDSCM00050189
IDE
Scroll bars missing on Getting Started View
SDSCM00050230
IDE
Browse box of Debug Server log is missing the filename designator
SDSCM00050275
IDE
License location is lost after an update
SDSCM00050324
IDE
Switching between Linaro GNU and TI compiler does not include/exclude linker command file and startup file properly
SDSCM00050342
IDE
When trying to manually load an executable to a PRU core, Browse project returns no hits
SDSCM00050353
IDE
Scanner config builder is very slow for projects where many files override build-settings
SDSCM00050356
IDE
DSS documentation for the description for memory.loadData2() API has typos.
SDSCM00050491
IDE
Manual-mode MPU Project-Property Settings don't persist
SDSCM00050552
IDE
assembly source debug for PRU does not work
SDSCM00050555
IDE
Memory Usage View should state that a non-TI compiler is not supported
SDSCM00050559
IDE
Register view cannot export registers if group has more than 100 registers in it
SDSCM00050580
IDE
CCS for Linux shows GTK and DVT errors errors when launched from the command line
SDSCM00050639
IDE
Profile clock produces different results through each run of the program when benchmarking floating point math
SDSCM00050647
IDE
CCS for Linux shows GTK and DVT errors errors when launched from the command line (Operation Completed in # ms.)
SDSCM00050659
IDE
Enabling parallel build with specific number of jobs along with a pre-build step causes the parallelism to not take effect
SDSCM00050660
IDE
Build option --exceptions correctly used on the compile, incorrectly missing on the link
SDSCM00050702
IDE
CIOServer documentation is missing descriptions
SDSCM00050708
IDE
GC: Not able to select UART for Tiva device
SDSCM00050730
IDE
Update "CDT GNU Support" package to include GDB h/w debug feature
SDSCM00050735
IDE
Continuous Refresh button disappears for Expressions View
SDSCM00050787
IDE
Data corruption occurs when loading memory in 8-bit TI Raw Data mode
SDSCM00050789
IDE
CCS stack trace does not work if stack is in far RAM
SDSCM00050791
IDE
Remove PRU from list of Targets in the target filter field
SDSCM00050797
IDE
Would like a method to disable Optimization Advice or not have it come to the foreground if in the background
SDSCM00050816
IDE
Backslashes in overridden tool-commands cause error-parser problems
SDSCM00050822
IDE
Unexpected behavior after pressing the ctrl key in GUI Composer editor
SDSCM00050844
IDE
Setting TCL_LIBRARY environment variable can cause the CCS installer to not start
SDSCM00050857
IDE
Wrong console output when programming a MSP430 FRAM device
SDSCM00050869
IDE
OMAPL137 and OMAP5912 board XML files are not available in CCS
SDSCM00050877
IDE
CCSv6: CCS Support dialog does not have the correct path for the installation logs
SDSCM00050888
IDE
CCS Memory view: "Copy to clipboard > Selection" limited by range in view
SDSCM00050894
IDE
CCS crashes when loading an ARM relocateable object file
SDSCM00050906
IDE
Add the ability to load a prebuilt linker xml file into the Memory Allocation View
SDSCM00050989
IDE
Request to suppress the message "Unrecognized product of type com.ti.rtsc.XDAIS" that appears during project import
SDSCM00051007
IDE
Memory browser does not display Q values
SDSCM00051063
IDE
Bundle a readme.txt file (with url to CCS Linux Host support page) with all CCS Linux installers
SDSCM00051084
IDE
Code Composer Help content has not been updated for v6. It is still for v5.
SDSCM00051118
IDE
CCSv6: CCS Support dialog does not have the correct path for the installation logs
SDSCM00051173
IDE
CCS deadlock during build
SDSCM00051265
IDE
Problems view displays garbled messages
SDSCM00051279
IDE
Scripting Console command 'eval' is overriding JavaScript 'eval' function
SDSCM00051293
IDE
MSPMathlib does not link in CCS by default; libmath.a library placed after libc.a
SDSCM00051414
IDE
FPv4SPD16 is shown as being set for CC3200 (but really is not)
SDSCM00044490
Trace
Need to load installed libbz2.dll and not the first one found on the windows path
SDSCM00047338
Trace
connecting to multiple cores in two separate debug sessions (each using a different emulator/target) will crash one CCS
SDSCM00049598
Trace
ETB Trace fails to collect data in CCSv6 for Linux
SDSCM00049598
Trace
ETB Trace fails to collect data in CCSv6 for Linux
SDSCM00049896
Trace
Trace Server Crashes on Debugger Terminate after using ITM
SDSCM00050239
Trace
Hardware watchpoint halts more often than expected when configured to halt on writes with specified data value
SDSCM00050528
Trace
Unable to set breakpoint while target is running on Tiva LaunchPad
SDSCM00050628
Trace
Trace Fails to Function after Flash Programming on Hercules Products
SDSCM00050762
Trace
Cortex M4 Trace jobs fail to properly initialize
SDSCM00051035
Trace
Trace analyzer does not think SWO is enabled when it in fact is
SDSCM00051040
Trace
Hang when running Statistical Profiling on TM4C129
SDSCM00051187
Trace
CCS Linux crashes when connecting to EVE coprocessor on a DRA74x
· General Enhancements
·
Support for Hercules RM57L and TMS570LC (Cortex-R4)
· Support for SimpleLink CC32xx.
· MSP430 EnergyTrace
o New
EnergyTrace tool for profiling application’s energy consumption, monitoring
internal device states and determining execution hotspots (statistical function
profile)
· Bug Fixes
Id
Component
Headline
SDSCM00050287
IDE
Tools menu activation can take a long time on Ubuntu.
SDSCM00050260
IDE
Example Project Import hangs
SDSCM00050224
IDE
Parameter -D PART_XXXXXXX missing from default build options for Tiva devices
SDSCM00050208
IDE
CCS not creating proper INTEL-HEX for msp430
SDSCM00050195
IDE
Importing a library project ends up as an executable project instead
SDSCM00050150
IDE
Installing an update of MSP GCC via CCS App Center deletes older version
SDSCM00050125
IDE
Rename "Integra Device Support" to "OMAPL/Integra Device Support"
SDSCM00050119
IDE
Project takes very long time to build when error parser is turned on
SDSCM00050109
IDE
msp hex utility improperly naming TI-TXT files
SDSCM00049970
IDE
Changing compiler version causes the compiler include paths to get corrupted
SDSCM00050185
DVT
DSP/BIOS dynamically created objects do not display their names in the ROV
SDSCM00050386
Emulation
Cannot step over on 28 after emu update
SDSCM00050117
MSP Compiler
ULP Advice links do not show up in the Advice view
· General Enhancements
· Enhancements to IDE:
· Integration with Eclipse v4.3.1
- Global Search bar (search all menus/views/toolbars)
- Flexible view layout: you can now stack views and editors together by default; for example, a view that requires a large working area can be stacked in the editor area to provide more space.
- Detached editors (editors can now be detached into their own windows).
- The Delete Resources dialog now shows the location of projects to be deleted on the file system
- Global Debug Toolbar in main toolbar area.
- Detached views.
- Open resource dialog enhancements.
- Search enhancements (whole word, last used page).
- Shared Install changes (i.e., helps manage install as root run as a user scenarios).
· Integration with CDT 8.2.1
- Code Analysis: external tool based checkers.
- Build console line wrapping.
- Makefile editor.
- Enhanced Expressions (ability to auto add multiple expressions using Regular Expressions).
- Breakpoint filtering (only show breakpoints for active debug context).
· Introduction of Code Composer Studio App Center.
o CCS now consists of a core image and a set of recommended & optional add-ons, available thru the App Center.
o These add-ons include, but are not limited to: TI compilers, GCC, Examples (e.g., MSP430Ware), TI-RTOS, GUI Composer, Simulators, etc.
o This
results in vastly improved product installation experience.
·
Support for GCC for MSP430.
·
Support for Energīa projects.
·
Support for new devices: CC26xx, Dual-core Delfino TMS320F2837xD
· Trace Analyzer
o Code Coverage for Optimized code
§ All code coverage results are now based on instruction executed. This enable coverage for optimized code
§ Coverage results are provided for Instruction, Source Line, Function and File
o Context Aware Inclusive Function Profiler
§ Added inclusive function profiling to the profiler (exclusive profiling already supported)
§ Support BIOS context awareness in Function Profiler to provide accurate inclusive function profiling
§ Included per-call function profiling (i.e. result for each instance of execution)
§ Detail view showing profile results based on caller and callee
o New STM usecase for Memory Transaction Logging
o ITM
§ Numerous usability improvements
· RTOS Analyzer and System Analyzer
o RTOS and System Analyzer improvements to support the following
§ Minimal footprint logger (loggerMin)
§ Improve performance of all loggers
§ Improve usability for configuring target application instrumentation
§ Validate target configuration and provide feedback in Analyzer launch dialog
· Bug Fixes
Id
Component
Headline
SDSCM00036459
DVT
Graph shows fractional numbers of samples on x-axis
SDSCM00038605
DVT
STS and CPU Load views should indicate that they are not supported in stop mode RTA
SDSCM00042689
DVT
Graph tool should allow user to set fixed values for the axis
SDSCM00043761
DVT
The "Display Data Size" parameter of the graph tool seems limited to 512
SDSCM00045320
DVT
Show Coverage option in CodeGen Coverage DVT view does not work
SDSCM00046965
DVT
Analysis (DVT) table views are slow to scroll on Linux
SDSCM00046966
DVT
Trace Analyzer delta cycle count is one row off on ARM targets
SDSCM00047977
DVT
CCS will hang if you terminate the debug session while ITM data is still being processed
SDSCM00048382
DVT
CCS install fails in the presence of VMWare shared folders
SDSCM00049506
DVT
Trace is not working on Linux for Sitara devices
SDSCM00044821
Emulation
CCSv5 is loading emulation DLLs from v3.3
SDSCM00044859
Emulation
CCS hangs when coming out of Windows 7 'Sleep' mode when using XDS560 PCI
SDSCM00045482
Emulation
CCSv5.1 f2811.gel typo
SDSCM00046465
Emulation
Hardware watchpoint set on a 32-bit variable halts the CPU for 16-bit access width when it should not
SDSCM00046908
Emulation
CCS hangs for long moments when debugging BIOS programs with RTDX enabled
SDSCM00047340
Emulation
Errors when starting up a debug session for a single target configuration with a multiple emulator and multicore setup
SDSCM00047514
Emulation
When a device is set for Boundary Scan, any attempt to connect yields a vague error message
SDSCM00048095
Emulation
memory mapped register reading performance degradation between CCS v5.2 and 5.4
SDSCM00048719
Emulation
Floating point option for save memory utility is not available on 66x
SDSCM00048815
Emulation
Connecting to ARM9 cores in Linux using emupack 5.1.320.0 causes a JVM failure
SDSCM00049032
Emulation
profile clock does not work on mid-GEM devices with XDS560v2 and XDS100
SDSCM00049535
Emulation
PRU Disassembly and Memory views show inconsistent data in the 0x1000 address boundary
SDSCM00038282
IDE
CCSv4: After launching target configuration, the debug window is not automatically brought to top
SDSCM00039487
IDE
EASY: Hex utility options should be exposed in the project options dialog
SDSCM00039794
IDE
Prompt user with confirmation dialog box when clicking on "Restore Defaults" in Project Build Properties
SDSCM00041406
IDE
US: Project properties is disabled even when there is a project highlighted
SDSCM00041649
IDE
After installing CCS, starting the setup program again causes "Program Compatibility Assistant" dialog
SDSCM00042122
IDE
Request to support loading of raw data format to Flash memory using Tools->Load Memory
SDSCM00043464
IDE
Differentiate between Standard Eclipse / CDT help and CCS IDE help
SDSCM00043913
IDE
In multicore debugging sessions, the debugger should have differentiator/identifiers of its elements for each core
SDSCM00044278
IDE
Install size reported is inflated
SDSCM00044371
IDE
CCS5.2.0.00069_linux crash shortly after startup when welcome screen displayed - Resource explorer/browser collides ds' xul
SDSCM00044374
IDE
CCS Editor: The parallel instruction syntax ('ll') is considered as a syntax for commenting for assembly files
SDSCM00045135
IDE
Headless projectCreate: add ability to set file/folder-level build-options
SDSCM00045301
IDE
CCS refresh compiler options GUI for each new compiler patch release (only currently for major/minor releases)
SDSCM00045352
IDE
Syntax highlighting for GEL files
SDSCM00045780
IDE
Full Verification of Code Download to MSP430 BSL fails
SDSCM00045853
IDE
RTSC Product Discovery should allow you to not be reminded for specific products
SDSCM00045895
IDE
Uninstaller hangs
SDSCM00045932
IDE
Linux: CCS crash when install GUI app or export app from GUI Composer
SDSCM00046042
IDE
CCS should automatically create the CGT built-in macros according to the project settings
SDSCM00046162
IDE
Hide hello world template for C2000 devices that don't have enough memory
SDSCM00046163
IDE
Helloworld template does not work for Stellaris
SDSCM00046166
IDE
Helloworld template doesn't work for common MSP devices
SDSCM00046393
IDE
Unable to connect to Stellaris Launchpad on Linux
SDSCM00046611
IDE
Request for command line projectBuild to be able to specify path/version of compiler tools to use for build
SDSCM00047075
IDE
MSP 430 only install contains ARM, C2000 and C6000 bios examples in TI Resource Explorer
SDSCM00047169
IDE
Improve usability for replacing tabs with spaces in the editor
SDSCM00047262
IDE
CCS Installer should by published by Texas Instruments
SDSCM00047339
IDE
'Test Connection' option in Target Configuration editor only tests first emulator defined
SDSCM00047365
IDE
Support comments in macros.ini and vars.ini files
SDSCM00047371
IDE
Ability to warn user to check their build and path variables on project import
SDSCM00047372
IDE
Ability to manage and modify/fix header specifications in the source
SDSCM00047399
IDE
Problems view does not display full text of error/warning
SDSCM00047457
IDE
Ability to sort 'Discovered projects' list alpha-numerically
SDSCM00047462
IDE
Breakpoint doCelarTriggerBps can run into concurrent modification exception
SDSCM00047524
IDE
Request to be able to modify flags set using "Set Additional Flags" using the same dialog box rather than the GUI options
SDSCM00047561
IDE
MSP430 - manual JTAG or Spy-Bi-Wire selection offered
SDSCM00047562
IDE
Rebuild of main project passes even if build of dependent library project fails
SDSCM00047576
IDE
Unable to generate code coverage data via DSS
SDSCM00047614
IDE
Scripting Console: Button to open/load a javascript file
SDSCM00047744
IDE
legacy format header files not handled correctly
SDSCM00047834
IDE
DS initiated progress dialog should consider the dialog option "Always Run on Background"
SDSCM00047846
IDE
Once I start a CCS debug session, build all will popup a modal progress box
SDSCM00047876
IDE
Floating point format not available in the Memory Browser view for C66x
SDSCM00048068
IDE
[C28 Flash] Flash programming does not work with "Auto Run on Reset" option on
SDSCM00048113
IDE
Adding RTSC support to a non-RTSC project sets it to wrong RTSC target
SDSCM00048152
IDE
Importing a SYS/BIOS project created with older version of CCS causes migration errors
SDSCM00048177
IDE
Scan compiler options files to improve conditional formatting
SDSCM00048225
IDE
Flash programming sometimes results in error "Timed out while writing to Flash memory"
SDSCM00048248
IDE
Breakpoint on a single source line causes the debugger to break twice before resuming execution
SDSCM00048258
IDE
Importing a CCS3.3 library project with project dependencies results in java.lang.NullPointerException
SDSCM00048265
IDE
In the compiler selection drop-down the listing for gcc should include the executable name
SDSCM00048309
IDE
Missing .ebss and .reset directive highlights for C2000 cmd file
SDSCM00048344
IDE
Class members are not shown in Variables view for code built with GCC
SDSCM00048357
IDE
MSP430 Trace View does not refresh properly when decoding instructions
SDSCM00048384
IDE
Project import tool sometimes does not resolve paths correctly
SDSCM00048388
IDE
Provide more precise error messages in Import CCS Project wizard
SDSCM00048408
IDE
Switching between two projects can sometime get GUI Composer out of sync
SDSCM00048410
IDE
Display demangled names instead of root name in disasm view
SDSCM00048417
IDE
The compiler option -v that specifies the silicon version is retained when switching device variants
SDSCM00048446
IDE
Flashing fails on Stellaris TM4C129X devices
SDSCM00048462
IDE
Makefile validation errors prevent makefile re-generation
SDSCM00048468
IDE
The Location of local variables is sometimes displayed incorrectly for GCC ELF files
SDSCM00048553
IDE
Include paths using "workspace_loc: variable are not passed to the compiler if the path does not exist
SDSCM00048568
IDE
Request to have LCD option for meter widget
SDSCM00048569
IDE
Request to have an out of range indicator option for gauges and meters
SDSCM00048612
IDE
CCS fails to program certain .out files when "Auto ECC generation" is enabled in Flash Settings
SDSCM00048700
IDE
Using a custom perspective copied from the 'CCS Debug' perspective is missing some DVT menus
SDSCM00048759
IDE
Deadlock due to "buddy" classloading
SDSCM00048906
IDE
Invoking gmake with -s option causes the Problems view to not update after errors have been corrected
SDSCM00048918
IDE
Would like a method to disable Optimization Advice
SDSCM00049002
IDE
App center in installer shows MSP430 content even when MSP not selected
SDSCM00049053
IDE
Request fpr Memory Allocation view to show UNION sections
SDSCM00049115
IDE
GUI Composer launcher.exe should accepts additional vmargs from the command line
SDSCM00049202
IDE
Directory structure affecting project import
SDSCM00049209
IDE
Post-build steps to generate flash images need to be updated for GCC
SDSCM00049212
IDE
List .hex in the list of valid extensions for a program to load
SDSCM00049265
IDE
Dependency build order is not as expected
SDSCM00049332
IDE
Unable to change options set via "Additional Flags" unless enclosed in quotes
SDSCM00049339
IDE
Profile Clock shows incorrect count on MSP430
SDSCM00049426
IDE
Unable to save memory contents to file on Windows Desktop
SDSCM00049438
IDE
Project Import dialog should not resize off the screen
SDSCM00049449
IDE
CCS Installer reports gnome-vfs2 as a missing dependency even when it is installed
SDSCM00049450
IDE
CCS Installer dependency checker misses libcanberra-gtk-module:i386
SDSCM00049451
IDE
Project Wizard device drop-downs are VERY slow on Linux
SDSCM00049473
IDE
CCSv6.0 installer creates bogus Start Menu entries
SDSCM00049495
IDE
Some projectspec settings are lost when imported in Turkish locale Windows
SDSCM00049563
IDE
CCS does not use the correct bit size for long long variables ( c2x, COFF debug info )
SDSCM00049569
IDE
Fast Verification does not work
SDSCM00049593
IDE
CCS App center throws a java.null.lang error if the PC does not have an active internet connection
SDSCM00049602
IDE
Implementation of SDSCM00039843 (default adaptive clocking setting) broke in CCSv5.4
SDSCM00049604
IDE
Hello world program built with Linaro GCC for Tiva C does not load to target
SDSCM00049606
IDE
A ControlSuite project that builds without errors in CCS 5.5 now generates build error in CCSv6
SDSCM00049656
IDE
Update setpath.bat to apply to CCSv6
SDSCM00049724
IDE
Changing the compiler tools from TI to MSP GCC does not automatically change the linker command file
SDSCM00049768
IDE
Project Wizard device drop-downs are VERY slow on Linux
SDSCM00049798
IDE
It takes too long to display all the tabs for a multi-core device in the project wizard.
SDSCM00049803
IDE
CCS fails in the presence of VMWare shared folders
SDSCM00046862
Simulation
66AK2H12 simulator : Source line Step over on function calls is not working for CortexA15 cores
SDSCM00045277
Trace
ETB is not working on DM365 and DM368
SDSCM00046146
Trace
Setting a trace end job completely disables the Trace generation
SDSCM00048594
Trace
DM814x Trace shows a Device ID mismatch in Linux
SDSCM00048596
Trace
DM816x core Trace shows nothing at the Trace Analyzer view in Linux
SDSCM00048597
Trace
OMAP4 and OMAPL138 Trace fails to properly initialize in CCS for Linux
SDSCM00049318
Trace
Data Mask property missing for Data Watchpoints on 28x
SDSCM00049499
Trace
Crash on Terminate with XDS200 on Ubuntu 12.04 LTS 32bit
Windows/Linux
Software Components
Version
IDE
Eclipse
4.5.1
Code Composer Plugins
6.2.0.N201608311100
CCS Launcher
6.2.0.20160106
CCS Utilities
1.0.0.20160210
JRE
1.7.0.80
TIREX Desktop
v2.0.2.125
Compilers
C2800
15.12.3.LTS
C5500
4.4.1
C6000 v7
7.4.18
C6000 v8
8.1.1
MSP430
15.12.3.LTS
ARM
15.12.3.LTS
GCC ARM (LaunchPad)
4.9.3.2015q3_20150921
On-line Documentation
1.1.4.0
Device Support
C2000
4.1.7.0
C55xx
1.1.6
C6000
1.1.2
C6000 Multicore
1.0.5
CC2538
2.0.0.00
CC26xx
2.0.0.00
CC32xx
1.0.8
DaVinci
1.1.3
Hercules
6.0.7.0
Keystone1
1.0.12.0
Keystone2
1.1.7.0
MSP430
6.3.4.4
MSP432
6.3.0.5
OMAP
1.0.9
OMAPL / Integra
1.0.9
Sitara
1.3.2
Stellaris
2.0.3.12770
Tiva-C Series ARM MCU
2.1.1.15071
Tiva-E Series ARM MCU
2.1.1.15071
UCD31xx
1.1.0
Other / Shared
1.0.9
Debugger / Emulation
Debug Server
6.2.1.1781
Debug Server Flash
6.2.1.1781
TI Debug/Trace
6.0.407.3
C2000 Flash
1.0.0.2
Tiva/Stellaris ICDI Debug Probe
2.1.3.15
BeagleBone FTDI Drivers
2.8.30.20140130
Blackhawk
6.0.83.003
Spectrum Digital
5.2.0.14
Analysis Tools
Data Visualization Tools
4.1.0.201608181627
Other Tools
Graphical Modeling Framework
1.7.0
Target Content Core
3.32.1.22
MSVC 2012
11.0.61030
MSVC 2005
6.0.2900.2180
Add-ons
E.g., MSP430Ware, GCC/MSP430, GUI Composer, ControlSuite, TI-RTOS, etc.
available via
Resource Explorer and CCS App CenterOS X
Software Components
Version
IDE
Eclipse
4.5.1
Code Composer Plugins
6.2.0.N201608311100
CCS Launcher
6.2.0.20160106
CCS Utilities
1.0.0.20160210
JRE
1.7.0.80
TIREX Desktop
v2.0.2.125
Compilers
C2800
15.12.3.LTS
C5500
4.4.1
MSP430
15.12.3.LTS
ARM
15.12.3.LTS
GCC ARM (LaunchPad)
4.9.3.2015q3_20150921
On-line Documentation
1.1.4.0
Device Support
C2000
4.1.7.0
C55xx
1.1.6
CC2538
2.0.0.00
CC26xx
2.0.0.00
CC32xx
1.0.8
Hercules
6.0.7.0
MSP430
6.3.4.4
MSP432
6.3.0.5
Stellaris
2.0.3.12770
Tiva-C Series ARM MCU
2.1.1.15071
Tiva-E Series ARM MCU
2.1.1.15071
Debugger / Emulation
Debug Server
6.2.1.1781
Debug Server Flash
6.2.1.1781
TI Debug/Trace
6.0.407.3
C2000 Flash
1.0.0.2
Tiva/Stellaris ICDI Debug Probe
2.1.3.15
Analysis Tools
Data Visualization Tools
4.1.0.201608181627
Other Tools
Graphical Modeling Framework
1.7.0
Target Content Core
3.32.1.22
Add-ons
E.g., MSP430Ware, GCC/MSP430, GUI Composer, ControlSuite, TI-RTOS, etc.
available via
Resource Explorer and CCS App Center
dbid |
id |
Component |
Headline |
Workaround |
Planned Resolution |
CCBT-1833 |
SDSCM00052534 |
Code Composer Studio |
Disabling "Auto ECC generation" Flash Option does not have any effect |
|
CCS 6.2.0 |
CCBT-1862 |
SDSCM00052782 |
Code Composer Studio |
Debug info about GCC C++ namespaces alias and namespace import are not processed correctly |
|
CCS 6.2.0 |
CCBT-1321 |
SDSCM00047055 |
Code Composer Studio |
Support for debugging RealView Compiler output including Semi-hosting |
|
CCS 7.0.0 |
CCBT-1484 |
SDSCM00048600 |
Code Composer Studio |
CCS needs to interpret .debug_macinfo ( was: Symbol not found when adding expression ) |
Inspect the generated map file for the program. Look for the symbol name and note its fully qualified name. Use the long name in the watch window or in the disassembly window when setting breakpoints. |
CCS 7.0.0 |
CCBT-1607 |
SDSCM00050372 |
Code Composer Studio |
CCS needs to interpret .debug_macinfo (GCC support) |
Inspect the generated map file for the program. Look for the symbol name and note its fully qualified name. Use the long name in the watch window or in the disassembly window when setting breakpoints. |
CCS 7.0.0 |
CCBT-1780 |
SDSCM00052109 |
Code Composer Studio |
static string constants cannot be displayed if gcc stores the string in .debug_str using DW_AT_const_value TAG. |
|
CCS 7.0.0 |
CCBT-1782 |
SDSCM00052111 |
Code Composer Studio |
Debug info about GCC C++ templated functions are not processed correctly |
|
CCS 7.0.0 |
CCBT-1814 |
SDSCM00052390 |
Code Composer Studio |
Estimated RAM usage printed in the console is not accurate |
The Memory Allocation view tends to display more accurate information |
CCS 7.0.0 |
CCBT-1625 |
SDSCM00050620 |
Code Composer Studio |
Request command line utility to dump out the type information for every symbol |
|
Revisit 2015 Q2 |
CCBT-1726 |
SDSCM00051715 |
Code Composer Studio |
Add ability to edit flash contents from the memory view for MCUs other than MSP430 |
|
Revisit 2016 Q2 |
CCBT-1350 |
SDSCM00047285 |
Code Composer Studio |
Support Linux OS Aware Debug |
|
Revisit 2016 Q4 |
CCDSK-2165 |
|
Code Composer Studio |
ARM GCC add-on fails to install from App Center on MacOS X due to an error in the update feature |
Install ARM GCC using the main CCS installer rather than from
App Center. To do this: |
CCS 6.2.0 |
CCDSK-2051 |
|
Code Composer Studio |
In Linux, chromium browser should open PDF internally |
6.2 will use xulrunner as the browser engine by default on
linux. In order to get inplace viewing of pdf files to work, the following
steps are required : |
CCS 7.0.0 |
CCDSK-2103 |
|
Code Composer Studio |
[Eclipse] Project import errors should be formatted to the size of the message box |
|
CCS 7.0.0 |
CCDSK-2104 |
|
Code Composer Studio |
Project import wizard should not leave failed attempts in the workspace |
|
CCS 7.0.0 |
CCDSK-2188 |
|
Code Composer Studio |
Emulation driver install scripts failing to restart udev on CentOS 7 |
Execute |
CCS 7.0.0 |
CCDSK-2202 |
|
Code Composer Studio |
kernel usb rules for msp430 are not installed |
After installation execute the following script with sudo
permissions |
CCS 7.0.0 |
CCSIDE-1944 |
SDSCM00047490 |
Code Composer Studio |
Rebuild of index for updating macro expansions does not permeate through multiple levels of include files |
|
3P |
CCSIDE-2328 |
SDSCM00050521 |
Code Composer Studio |
Autoformat (ctrl + shift + F) can alter formatting of source files which can cause compiler errors. |
|
3P |
CCSIDE-2491 |
SDSCM00051637 |
Code Composer Studio |
Refactor->Rename does not work for structure members inside extern "C |
|
3P |
CCSIDE-2495 |
SDSCM00051647 |
Code Composer Studio |
Scanner discovery functionality for GCC projects is not working |
N/A. Use CCSv6.0.1 |
3P |
CCSIDE-28 |
SDSCM00034880 |
Code Composer Studio |
CCS is not finding source files from an included library |
|
4.1, CCS 4.1.1 GA |
CCSIDE-2809 |
SDSCM00034676 |
Code Composer Studio |
CCS hangs on startup if Source Control integration is enabled and the provider is ClearCase 7.x |
|
4.1 |
CCSIDE-215 |
SDSCM00036170 |
Code Composer Studio |
Real-time mode menu items are displayed with funny characters |
|
4.1.3, CCS 4.1.3 GA |
CCSIDE-80 |
SDSCM00035255 |
Code Composer Studio |
Need scripting console function to set active build configuration |
|
5.0.0 LR, CCS 5.0.0 LR, idecore_setup_5.0.0.N201008311900 |
CCSIDE-2575 |
SDSCM00052319 |
Code Composer Studio |
On OS X, several dialogs that are meant to allow user to save to file do not give the option to specify file name |
|
CCS 6.1.2 OS X GA |
CCSIDE-982 |
SDSCM00039747 |
Code Composer Studio |
Changing a device should not reset the properties of an emulator |
|
CCS 6.2.0 |
CCSIDE-1969 |
SDSCM00047723 |
Code Composer Studio |
In the Target Configuration Editor, changing the "Device" or the "Connection" should not reset to all defaults |
N/A. |
CCS 6.2.0 |
CCSIDE-2512 |
SDSCM00051812 |
Code Composer Studio |
After refactoring a project or simply changing XDCTools version, the RTSC Target field gets changed |
|
CCS 6.2.0 |
CCSIDE-2499 |
SDSCM00051716 |
Code Composer Studio |
Need connection between Project Debug Properties and the ccxml (target configuration) file |
|
CCS 6.3.0 |
CCSIDE-813 |
SDSCM00038559 |
Code Composer Studio |
[CDT] Add the ability to specify the build-directory for CCS projects |
|
CCS 7.0.0 |
CCSIDE-814 |
SDSCM00038571 |
Code Composer Studio |
Need excluded files filter for the Project Explorer |
|
CCS 7.0.0 |
CCSIDE-2191 |
SDSCM00049607 |
Code Composer Studio |
[CDT] Enhance Codan plug-in with the ability to create custom rules |
Use other 3rd party Code Analysis plug-ins that support this feature |
CCS 7.0.0 |
CCSIDE-2323 |
SDSCM00050489 |
Code Composer Studio |
Once launch configuration has been created, can't switch from load symbols back to load program |
Simplest way of making the change without deleting launch configuration is to use "Debug Configurations..." dialog (Run-> Debug Configurations...) change the load program/load symbols setting works correctly using that path. |
CCS 7.0.0 |
CCSIDE-2329 |
SDSCM00050527 |
Code Composer Studio |
App Center should display current version, new version and link to release notes |
|
CCS 7.0.0 |
CCSIDE-2333 |
SDSCM00050556 |
Code Composer Studio |
Memory Usage View should support GCC |
|
CCS 7.0.0 |
CCSIDE-2500 |
SDSCM00051717 |
Code Composer Studio |
Remember register expansion state and position across debug invocations |
|
CCS 7.0.0 |
CCSIDE-2508 |
SDSCM00051773 |
Code Composer Studio |
In TI-RTOS programs, source file correlation and interleaved source in disassembly view is incorrect for the boot routine |
|
CCS 7.0.0 |
CCSIDE-2515 |
SDSCM00051839 |
Code Composer Studio |
Cannot open PDFs from Resource Explorer |
|
CCS 7.0.0 |
CCSIDE-2516 |
SDSCM00051840 |
Code Composer Studio |
Provide a large icon set on Eclipse for a better experience with High Definition monitors |
A hack is proposed at the following link: |
CCS 7.0.0 |
CCSIDE-2529 |
SDSCM00051932 |
Code Composer Studio |
Remove MMU Page Table view from CCS |
Use DSS APIs instead, as documented here: |
CCS 7.0.0 |
CCSIDE-2607 |
SDSCM00052518 |
Code Composer Studio |
When multiple target configurations are created for a project, is debug configuration manglee the loadable cores |
Additional details at the forum thread below: |
CCS 7.0.0 |
CCSIDE-2620 |
SDSCM00052612 |
Code Composer Studio |
Add ability to delete generated assembly listing files as part of "clean" operation |
|
CCS 7.0.0 |
CCSIDE-2878 |
|
Code Composer Studio |
Enabling parallel build on MacOS results in "fcntl(): Bad file descriptor" message |
|
CCS 7.0.0 |
CCSIDE-2905 |
|
Code Composer Studio |
Head-less project import command should fail if specified workspace folder is in use |
Close any CCS instance that is using the same workspace folder |
CCS 7.0.0 |
CCSIDE-1938 |
SDSCM00047442 |
Code Composer Studio |
New project wizard should only create one default build configuration |
|
Revisit 2015 Q2 |
CCSIDE-2570 |
SDSCM00052235 |
Code Composer Studio |
Resource Explorer fails to create a project from the MSPWare Code Examples |
N/A |
Revisit 2015Q4 |
CCSIDE-2525 |
SDSCM00051903 |
Code Composer Studio |
Formatter will add improper indentation when used on code where __attribute__ is used to pack structs and union |
|
Revisit 2016 Q2 |
CCSIDE-2583 |
SDSCM00052402 |
Code Composer Studio |
[CDT] CDT should not persist build options names on the .cproject file |
Make the modifications and check-in the version of the file with the additional “name” attributes, and after that there shouldn’t see these bogus changes anymore. |
Revisit 2016 Q2 |
DVT-786 |
SDSCM00045827 |
Code Composer Studio |
Using JTAGRunMode with stairstep example on LM4F232 results in "trouble reading memory block" error |
|
CCS 6.2.0 |
DVT-1241 |
SDSCM00051727 |
Code Composer Studio |
System Analyzer does not work if Runmode and buffer in DDR3 |
|
CCS 6.2.0 |
DVT-269 |
SDSCM00039329 |
Code Composer Studio |
Profiling help topic is missing screen captures |
|
CCS 7.0.0 |
DVT-796 |
SDSCM00046280 |
Code Composer Studio |
Image Analyzer does not process 8bit data read in big endian for RGB correctly |
Customer was able to workaround this using 32bit Data Read. See
Forum Post for details: |
CCS 7.0.0 |
DVT-1169 |
SDSCM00050087 |
Code Composer Studio |
Ability to show user events in Execution Graph |
|
CCS 7.0.0 |
DVT-1234 |
SDSCM00051495 |
Code Composer Studio |
Graph Q_Value parameter should allow values larger than 30 |
N/A. |
CCS 7.0.0 |
DVT-1264 |
SDSCM00052155 |
Code Composer Studio |
Loading a saved trace configuration does not work |
|
CCS 7.0.0 |
DVT-1266 |
SDSCM00052254 |
Code Composer Studio |
Request to enhance the visibility of the plot inside the Graph tool when using grids |
|
Revisit 2016 Q2 |
DVT-46 |
SDSCM00035897 |
Code Composer Studio |
Dual graphs should support independent data Types |
|
Revisit 2016 Q4 |
DVT-53 |
SDSCM00035986 |
Code Composer Studio |
Useful to have magnitude in logarithmic although db would be even better |
|
Revisit 2016 Q4 |
DVT-203 |
SDSCM00037952 |
Code Composer Studio |
Graph Tool should allow the use of arrow keys to navigate through the buffer and the graph |
The graph can be navigated using the mouse. |
Revisit 2016 Q4 |
DVT-329 |
SDSCM00040280 |
Code Composer Studio |
Ability to select cached or uncached external memory access in the Graph Tool and Image Analyzer |
N/A. |
Revisit 2016 Q4 |
DVT-343 |
SDSCM00040469 |
Code Composer Studio |
Use profile data to compute CPU loading |
|
Revisit 2016 Q4 |
DVT-346 |
SDSCM00040472 |
Code Composer Studio |
Would like to pick out a range of data to display |
|
Revisit 2016 Q4 |
DVT-459 |
SDSCM00041366 |
Code Composer Studio |
Code Coverage coloring does not work for files that do not have a CCS Project |
|
Revisit 2016 Q4 |
DVT-1166 |
SDSCM00050047 |
Code Composer Studio |
System Analyzer/UIA data transfer via JTAG should have a progress bar |
N/A. |
Revisit 2016 Q4 |
DVT-1250 |
SDSCM00051816 |
Code Composer Studio |
Number of records on Trace display roll over for large data collections |
N/A |
Revisit 2016 Q4 |
DVT-1270 |
SDSCM00052456 |
Code Composer Studio |
In Graph view, measurement markers set for Y-axis or both axes do not display values |
|
Revisit 2016 Q4 |
DVT-1272 |
SDSCM00052660 |
Code Composer Studio |
Request to be able to save and restore debug perspective with Graph view open during successive invocations of CCS |
|
Revisit 2016 Q4 |
DVT-1316 |
SDSCM00050650 |
Code Composer Studio |
CCS for Linux shows GTK and DVT errors errors when launched from the command line (DVT Text) |
|
Revisit 2016 Q4 |
DVT-1324 |
SDSCM00050619 |
Code Composer Studio |
Trace viewer should not reset its display arrangement when a column is added/restored |
N/A. |
Revisit 2016 Q4 |
DVT-1325 |
SDSCM00050622 |
Code Composer Studio |
Trace display should allow cumulative storing of data between start/stop jobs |
Save to .csv/.tdf every step on the way. |
Revisit 2016 Q4 |
DVT-1265 |
SDSCM00052222 |
Code Composer Studio |
Lose editor area if Trace Viewer is the only editor open when you restart CCS |
Go to the Window menu and select Switch to Editor. Click the select all button. Then click on the close button. |
CCS 7.1 |
CCBT-1971 |
|
Code Composer Studio |
Debugger loses line debugging and stack frame with GCC assembly code |
N/A |
|
CCDSK-2203 |
|
Code Composer Studio |
kernel usb rules for msp430 contain a typo preventing G2 devices from working |
The typo is that the value F432
should be f432. The complete line should be: |
|
CCSIDE-855 |
SDSCM00038857 |
Code Composer Studio |
EASY: Simplified Build Options Dialog |
|
|
CCSIDE-956 |
SDSCM00039559 |
Code Composer Studio |
Would like ability to adjust file specific options on multiple selected files. |
|
|
CCSIDE-1102 |
SDSCM00040259 |
Code Composer Studio |
Merge the two CCS project import wizards |
|
|
CCSIDE-1105 |
SDSCM00040262 |
Code Composer Studio |
MMU Page table view should be listed on the view menu |
|
|
CCSIDE-2573 |
SDSCM00052300 |
Code Composer Studio |
When creating a new AM5726/28 project the target configuration will have errors |
Open the ccxml file and click on 3 of the 4 ICECrusher nodes and
give them a unique name. |
|
CCSIDE-2895 |
|
Code Composer Studio |
Cannot step into C++ polymorphic function call |
|
|
CCSIDE-2911 |
|
Code Composer Studio |
Compiling with predefined symbol --define=SYM='A' strips off the single quotes around the character constant |
|
|
CCSIDE-2922 |
|
Code Composer Studio |
NullPointerException error when switching between build configurations for a project with out file generated outside project folder |
Go into the project properties->Linked Resources and remove the “invalid” .out file resource that automatically gets added on every build |
|
DBGTRC-2248 |
SDSCM00051476 |
Emulation |
Add ability to view D0 - D31 and S0 - S31 floating point registers on Cortex A15 |
|
|
DBGTRC-2280 |
SDSCM00051900 |
Emulation |
GDB Agent should perform flash operations on MSP432, Tiva and C2000 devices |
Use Uniflash or CCS to flash your code. |
|
DBGTRC-2349 |
SDSCM00052458 |
Emulation |
Automatic firmware update for XDS200 |
Use the xds2xx_conf utility in \ccsv6\ccs_base\emulation\specdig\xds2xx to update the firmware. You must have installed support for Spectrum Digital Debug Probes. |
|
DBGTRC-2353 |
SDSCM00052492 |
Emulation |
dbgjtag should have a timeout option |
N/A. |
|
DBGTRC-2393 |
SDSCM00052733 |
Emulation |
CC3200 SWD load failure on Linux |
|
|
DBGTRC-2982 |
SDSCM00048795 |
Emulation |
Trace: "End at address" of the "Trace Range" parameter fails to stop and display trace data |
Use "Range" or "Start and stop at address" instead. |
|
DBGTRC-3160 |
|
Emulation |
CCS disassembly view was showing the raw .word value for some instructions rather than the actual instruction |
|
|
DBGTRC-3183 |
|
Emulation |
SIGSEGV when disconnecting from XDS100v1 on Ubuntu 16 |
|
|
DVT-484 |
SDSCM00041756 |
Code Composer Studio |
Add ability in image analyzer to flip the image on either axis: up/down or left/right |
|
|
DVT-1177 |
SDSCM00050408 |
Code Composer Studio |
Request for a way to clear the printf log data without having to close the view |
|
|
DVT-1178 |
SDSCM00050409 |
Code Composer Studio |
Request for a way to be able to adjust and save column settings in system analyzer data views |
|
|
DVT-1179 |
SDSCM00050410 |
Code Composer Studio |
Request to add commas to timestamps in RTOS Analyzer views to make it easier to analyze the numbers |
|
|
DVT-1190 |
SDSCM00050680 |
Code Composer Studio |
Bookmarks in any DVT view (Trace/RTOS/System Analyzer) does not work with filtering and sorting. |
None. |
|
DVT-1326 |
SDSCM00052798 |
Code Composer Studio |
Request to add back TPIU ITM trace support for Concerto |
|
|
For up-to-date status information, go to:
Windows
XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Visual SourceSafe, Visual
Basic, and Visual C++ are all trademarks and/or registered trademarks of
Microsoft Corporation.
C2000, C5000, C54x, C55x, C6000, C6x, CC2538, CC26xx, CC32xx, OMAP, TMS320,
TMS570, MSP430, Stellaris, Tiva-C, Hercules, GUI Composer, Grace, Code Composer
Studio, Code Composer Studio App Center, TI-RTOS, SYS/BIOS, XDS560, XDS510,
XDS200, XDS100 and XDS110 are trademarks of Texas Instruments.
© Copyright 2015